FreeCalypso > hg > fc-magnetite
view cdg211/prim/mncc.pdf @ 660:293c7db5f10f
bmi3: fixed the mysterious "mute on first call" bug
When UI-enabled fw boots on a previously blank (no /mmi/* files) FFS
for the first time, the output_volume member of the persistent UI settings
structure was left uninitialized, corresponding to the earpiece volume
being set to mute, which is an invalid setting. Because of other quirks
in the far-from-finished UI code, this volume setting takes effect only
when the first call is answered, producing the odd behaviour seen at the
user level.
The current fix is to set the blank-FFS default for output_volume to
volume level 4, which is the same -6 dB Iota volume as the ACI default.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 14 May 2020 02:50:41 +0000 |
parents | 56abf6cf8a0b |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : mncc.pdf ;*** Creation : Fri Jun 08 13:57:58 CST 2007 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : mncc ;*** Document No. : 6147.101.96.116 ;*** Document Date : 2003-07-03 ;*** Document Status: BEING_PROCESSED ;*** Document Author: HM ;******************************************************************************** PRAGMA SRC_FILE_TIME "Tue Jan 31 13:13:54 2006" PRAGMA LAST_MODIFIED "2003-07-03" PRAGMA ID_AND_VERSION "6147.101.96.116" CONST FACILITY_LEN 251 ; Max. length of facility considering L2 constraints CONST USER_LEN 131 ; CONST MAX_CC_CALLING_NUMBER 22 ; max. length of calling party BCD number (MT SETUP) CONST MAX_CC_REDIR_NUMBER 32 ; max. length of redirecting number (MT SETUP) CONST MAX_CC_CALLED_NUMBER 80 ; max. length of called party BCD number (MO SETUP) CONST SUB_LENGTH 20 ; CONST MAX_BC_LEN 10 ; EXTERN CONST @p_gsmcom - CC_ORIGINATING_ENTITY@ CC_ORIGINATING_ENTITY ; mask for indicating the originating entity of a cause is CC EXTERN CONST @p_gsmcom - ACI_ORIGINATING_ENTITY@ ACI_ORIGINATING_ENTITY ; mask for indicating the originating entity of a cause is ACI CONST MAX_CC_CAUSE_LENGTH 30 ; Max. length of the raw cause variable VALTAB VAL_ti VAL 0 - 6 "ms originated identifier" VAL 8 - 14 "ms terminated transaction" VAL 7 TI_RES_1 "reserved" VAL 15 TI_RES_2 "reserved" VALTAB VAL_progress_desc VAL 1 PROG_NO_END_TO_END_PLMN "call is not end-to-end PLMN/ISDN, further call progress information may be available in-band" VAL 2 PROG_DEST_NON_PLMN "destination address in non-PLMN/ISDN" VAL 3 PROG_ORIGIN_NON_PLMN "origination address in non-PLMN/ISDN" VAL 4 PROG_RETURN_TO_PLMN "call has returned to the PLMN/ISDN" VAL 8 PROG_INBAND_AVAIL "in-band information or appropriate pattern now available" VAL 32 PROG_END_TO_END_PLMN "call is end-to-end PLMN/ISDN" VAL 64 PROG_QUEUEING "queueing" VAL 254 PROG_UNSPECIFIC "unspecific, used when coding standard is not equal to GSM; note that the value chosen here must not collide with any defined value of the progress description IE of the air interface" VAL 255 PROG_NOT_PRES "not present" VALTAB VAL_fac_context VAL 0 FAC_IN_ALERT "Facility information in ALERT message" VAL 1 FAC_IN_CALL_PROCEED "Facility information in CALL PROCEEDING message" VAL 2 FAC_IN_DISCONNECT "Facility information in DISCONNECT message" VAL 3 FAC_IN_RELEASE "Facility information in RELEASE message" VAL 4 FAC_IN_CONNECT "Facility information in CONNECT message" VAL 5 FAC_IN_SETUP "Facility information in SETUP message" VAL 6 FAC_IN_FACILITY "Facility information in USER INFORMATION message" VAL 7 FAC_IN_RELEASE_COMP "Facility information in RELEASE COMPLETE message" VAL 8 FAC_IN_RECALL "Facility information in RECALL message" VALTAB VAL_info_context VAL 0 USER_IN_ALERT "User information in ALERT message" VAL 1 USER_IN_DISCONNECT "User information in DISCONNECT message" VAL 2 USER_IN_PROGRESS "User information in PROGRESS message" VAL 3 USER_IN_RELEASE "User information in RELEASE message" VAL 4 USER_IN_CONNECT "User information in CONNECT message" VAL 5 USER_IN_SETUP "User information in SETUP message" VAL 6 USER_IN_USER "User information in USER INFORMATION message" VALTAB VAL_pd VAL 16 - 63 "reserved for other network layer or through layer 3 protocols including Rec.X.25" VAL 64 - 79 "national use" VAL 80 - 254 "reserved for other network through layer or layer 3 protocols including Rec.X.25" VAL 0 PD_USER "user specific protocol" VAL 1 PD_HIGH_LAYER "OSI high layer protocols" VAL 2 PD_X244 "X.244" VAL 3 PD_SYS_MANAGE "reserved for system management convergence function" VAL 4 PD_IA5 "IA5 characters" VAL 7 PD_V120 "Rec.V.120 rate adaption" VAL 8 PD_Q931 "Q.931 (I.451) user-network call control messages" VALTAB VAL_serv VAL 0 SERV_SPEECH "speech" VAL 1 SERV_DATA "data" VAL 255 SERV_NOT_PRES "not present" VALTAB VAL_cause VAL 0b0000010100000001 MNCC_CAUSE_UNASSIGN "unassigned (unallocated) number" VAL 0b0000010100000011 MNCC_CAUSE_NO_ROUTE "no route to destination" VAL 0b0000010100000110 MNCC_CAUSE_CHAN_UNACCEPT "channel unacceptable" VAL 0b0000010100001000 MNCC_CAUSE_BARRED "operator determined barring" VAL 0b0000010100010000 MNCC_CAUSE_CALL_CLEAR "normal call clearing" VAL 0b0000010100010001 MNCC_CAUSE_USER_BUSY "user busy" VAL 0b0000010100010010 MNCC_CAUSE_NO_RESPONSE "no user responding" VAL 0b0000010100010011 MNCC_CAUSE_ALERT_NO_ANSWER "user alerting, no answer" VAL 0b0000010100010101 MNCC_CAUSE_CALL_REJECT "call rejected" VAL 0b0000010100010110 MNCC_CAUSE_NUM_CHANGED "number changed" VAL 0b0000010100011001 MNCC_CAUSE_PREEMPTION "pre-emption" VAL 0b0000010100011010 MNCC_CAUSE_USER_CLEAR "non selected user clearing" VAL 0b0000010100011011 MNCC_CAUSE_DEST_ORDER "destination out of order" VAL 0b0000010100011100 MNCC_CAUSE_NUM_FORMAT "invalid number format (incomplete number)" VAL 0b0000010100011101 MNCC_CAUSE_FACILITY_REJECT "facility rejected" VAL 0b0000010100011110 MNCC_CAUSE_STATUS_ENQUIRY "response to status enquiry" VAL 0b0000010100011111 MNCC_CAUSE_UNSPECIFIED "normal, unspecified" VAL 0b0000010100100010 MNCC_CAUSE_NO_CHAN_AVAIL "no circuit / channel available" VAL 0b0000010100100110 MNCC_CAUSE_NETWORK_ORDER "network out of order" VAL 0b0000010100101001 MNCC_CAUSE_TEMP_FAIL "temporary failure" VAL 0b0000010100101010 MNCC_CAUSE_SWITCH_CONGEST "switching equipment congestion" VAL 0b0000010100101011 MNCC_CAUSE_INFO_DISCARD "access information discarded" VAL 0b0000010100101100 MNCC_CAUSE_REQ_CHAN_UNAVAIL "requested circuit / channel not available" VAL 0b0000010100101111 MNCC_CAUSE_RESOURCE_UNAVAIL "resources unavailable, unspecified" VAL 0b0000010100110001 MNCC_CAUSE_QOS_UNAVAIL "quality of service unavailable" VAL 0b0000010100110010 MNCC_CAUSE_FACILITY_UNSUBSCRIB "requested facility not subscribed" VAL 0b0000010100110111 MNCC_CAUSE_BARRED_IN_CUG "incoming calls barred within the CUG" VAL 0b0000010100111001 MNCC_CAUSE_BEARER_CAP_AUTHORIZ "bearer capability not authorized" VAL 0b0000010100111010 MNCC_CAUSE_BEARER_CAP_UNAVAIL "bearer capability not presently available" VAL 0b0000010100111111 MNCC_CAUSE_SERVICE_UNAVAIL "service or option not available, unspecified" VAL 0b0000010101000001 MNCC_CAUSE_BEARER_NOT_IMPLEM "bearer service not implemented" VAL 0b0000010101000100 MNCC_CAUSE_ACM_MAX "ACM equal or greater than ACMmax" VAL 0b0000010101000101 MNCC_CAUSE_FACILITY_NOT_IMPLEM "requested facility not implemented" VAL 0b0000010101000110 MNCC_CAUSE_RESTICT_BEARER_CAP "only restricted digital information bearer capability is available" VAL 0b0000010101001111 MNCC_CAUSE_SERVICE_NOT_IMPLEM "service or option not implemented, unspecified" VAL 0b0000010101010001 MNCC_CAUSE_INVALID_TI "invalid transaction identifier value" VAL 0b0000010101010111 MNCC_CAUSE_USER_NOT_IN_CUG "user not member of CUG" VAL 0b0000010101011000 MNCC_CAUSE_INCOMPAT_DEST "incompatible destination (originated by net)" VAL 0b0000010101011011 MNCC_CAUSE_INVALID_TRANS_NET "invalid transit network selection" VAL 0b0000010101011111 MNCC_CAUSE_INCORRECT_MESSAGE "semantically incorrect message" VAL 0b0000010101100000 MNCC_CAUSE_INVALID_MAND_INFO "invalid mandatory information" VAL 0b0000010101100001 MNCC_CAUSE_MESSAGE_TYPE_NOT_IMPLEM "message type non-existent or not implemented" VAL 0b0000010101100010 MNCC_CAUSE_MESSAGE_TYPE_INCOMPAT "message type not compatible with protocol state" VAL 0b0000010101100011 MNCC_CAUSE_INFO_ELEM_NOT_IMPLEM "information element non-existent or not implemented" VAL 0b0000010101100100 MNCC_CAUSE_COND_INFO_ELEM "conditional information element error" VAL 0b0000010101100101 MNCC_CAUSE_MESSAGE_INCOMPAT "message not compatible with protocol state" VAL 0b0000010101100110 MNCC_CAUSE_TIMER "recovery on timer expiry" VAL 0b0000010101101111 MNCC_CAUSE_PROTOCOL "protocol error, unspecified" VAL 0b0000010101111111 MNCC_CAUSE_INTERWORKING "interworking, unspecified" VAL 0b0100010100011101 MNCC_CAUSE_MS_FACILITY_REJECT "facility rejected (originated by MS)" VAL 0b0100010101000001 MNCC_CAUSE_MS_BEARER_NOT_IMPLEM "bearer service not implemented (originated by MS)" VAL 0b0100010101010001 MNCC_CAUSE_MS_INVALID_TI "invalid transaction identifier value (originated by MS)" VAL 0b0100010101011000 MNCC_CAUSE_MS_INCOMPAT_DEST "incompatible destination (originated by MS)" VAL 0b0100010101100000 MNCC_CAUSE_MS_INVALID_MAND_INFO "invalid mandatory information (originated by MS)" VAL 0b0100010101100100 MNCC_CAUSE_MS_COND_INFO_ELEM "conditional information element error (originated by MS)" VAL 0b0100010101100101 MNCC_CAUSE_MS_MESSAGE_INCOMPAT "message not compatible with protocol state (originated by MS)" VAL 0b0100010101100110 MNCC_CAUSE_MS_TIMER "recovery on timer expiry (originated by MS)" VAL 0b1000010100000000 MNCC_CAUSE_MODIFY_SUCCESS "in-call modification successfully performed, MODIFY COMPLETE message received" VAL 0b1000010100000010 MNCC_CAUSE_HOLD_SUCCESS "hold successfully performed, HOLD ACKNOWLEDGE message received" VAL 0b1000010100000011 MNCC_CAUSE_RETRIEVE_SUCCESS "retrieve successfully performed, RETRIEVE ACKNOWLEDGE message received" VAL 0b1000010100000100 MNCC_CAUSE_DTMF_START_SUCCESS "start of DTMF successfully performed, START DTMF ACKNOWLEDGE message received" VAL 0b1000010100000101 MNCC_CAUSE_DTMF_STOP_SUCCESS "stop of DTMF successfully performed, STOP DTMF ACKNOWLEDGE message received" VAL 0b1000010111111111 MNCC_CAUSE_NO_NET_CAUSE "network initiated without cause" VAL 0b1100010100000000 MNCC_CAUSE_SUCCESS "operation successfully performed (e.g. a call establishment); this cause is used only if no more specific cause applies" VAL 0b1100010100000001 MNCC_CAUSE_DTMF_NOT_ALLOWED "DTMF is currently not allowed (no speech TCH)" VAL 0b1100010100000010 MNCC_CAUSE_DTMF_BUFFER_FULL "DTMF storage buffer overflow" VAL 0b1100010100000011 MNCC_CAUSE_DTMF_ABORTED "DTMF was aborted (e.g. due to state change)" VAL 0b1100010100000100 MNCC_CAUSE_MAX_NO_RECALLS_REACHED "maximum number of recalls (CCBS) was reached" VAL 0b1100010100000101 MNCC_CAUSE_MAX_NO_CALLS_REACHED "maximum number of calls was reached" VAL 0b1100010100000110 MNCC_CAUSE_CHANNEL_SYNC "channel mode or type information (changed)" VAL 0b1100010100000111 MNCC_CAUSE_REEST_STARTED "call re-establishment started" VAL 0b1100010100001000 MNCC_CAUSE_REEST_FINISHED "call re-establishment is finished" VAL 0b1100010111111111 MNCC_CAUSE_NO_MS_CAUSE "MS initiated without cause" VALTAB VAL_nd VAL 0 ND_USER_SUSPEND "user suspended" VAL 1 ND_USER_RESUME "user resumed" VAL 2 ND_BEAR_CHANGE "bearer change" VAL 255 ND_NOT_PRES "not present" VALTAB VAL_tos VAL 0 TOS_NSAP "NSAP (X.213/ISO 8348 AD2)" VAL 2 TOS_USER_SPEC "user specified" VAL 255 TOS_NOT_PRES "not present" VALTAB VAL_odd_even VAL 0 OE_EVEN "even number of address signals" VAL 1 OE_ODD "odd number of address signals" VALTAB VAL_key VAL 0x30 DIG_0 "digit '0'" VAL 0x31 DIG_1 "digit '1'" VAL 0x32 DIG_2 "digit '2'" VAL 0x33 DIG_3 "digit '3'" VAL 0x34 DIG_4 "digit '4'" VAL 0x35 DIG_5 "digit '5'" VAL 0x36 DIG_6 "digit '6'" VAL 0x37 DIG_7 "digit '7'" VAL 0x38 DIG_8 "digit '8'" VAL 0x39 DIG_9 "digit '9'" VAL 0x41 DIG_A "'A'" VAL 0x42 DIG_B "'B'" VAL 0x43 DIG_C "'C'" VAL 0x44 DIG_D "'D'" VAL 0x2A DIG_STAR "'('" VAL 0x23 DIG_HASH "'#'" VAL 0x7F DIG_RES "reserved" VALTAB VAL_ch_mode VAL 0 CHM_SIG_ONLY "signalling only" VAL 1 CHM_SPEECH "speech full rate or half rate version 1" VAL 33 CHM_SPEECH_V2 "speech full rate or half rate version 2" VAL 65 CHM_SPEECH_V3 "speech full rate or half rate version 3" VAL 3 CHM_DATA_9_6 "data 9.6 kBit/s" VAL 11 CHM_DATA_4_8 "data 4.8 kBit/s" VAL 19 CHM_DATA_2_4 "data 2.4 kBit/s" VAL 15 CHM_DATA_14_4 "data 2.4 kBit/s" VALTAB VAL_ch_type VAL 0 CH_SDCCH "SDCCH channel" VAL 1 CH_TCH_F "TCH Fullrate" VAL 2 CH_TCH_H "TCH Halfrate" VALTAB VAL_more_data VAL 0 MD_NO_MORE_DATA "no more data" VAL 1 MD_MORE_DATA "more data" VAL 255 MD_NOT_PRES "not present" VALTAB VAL_prio VAL 0 PRIO_NORM_CALL "normal call" VAL 1 PRIO_EMERG_CALL "emergency call" VALTAB VAL_clir_sup VAL 0 CLR_SUP "CLIR suppressed" VAL 1 CLR_SUP_NOT "CLIR not suppressed" VAL 0xFF CLR_NOT_PRES "CLIR not present" VALTAB VAL_sig VAL 0 SIG_DIAL_TONE_ON "dial tone on" VAL 1 SIG_RING_BACK_TONE_ON "ring back tone on" VAL 2 SIG_INT_TONE_ON "intercept tone on" VAL 3 SIG_NET_CONG_TONE_ON "network congestion tone on" VAL 4 SIG_BUSY_TONE_ON "busy tone on" VAL 5 SIG_CONF_TONE_ON "confirm tone on" VAL 6 SIG_ANS_TONE_ON "answer tone on" VAL 7 SIG_CALL_WAIT_TONE_ON "call waiting tone on" VAL 8 SIG_OFF_HOOK_WARN_TONE_ON "off-hook warning tone on" VAL 63 SIG_TONES_OFF "tones off" VAL 79 SIG_ALERT_OFF "alerting off" VAL 255 SIG_NOT_PRES "not present" VALTAB VAL_congest_lev VAL 0 CL_RECEIVER_READY "receiver ready" VAL 15 CL_RECEIVER_NOT_READY "receiver not ready" VAL 255 CL_NOT_PRES "not present" VALTAB VAL_ss_version VAL 0 SS_VERSION_2 "phase 2 service, ellipsis notation and phase 2 error handling" VAL 1 SS_VERSION_3 "SS-Protocol version 3 and phase 2 error handling" VAL 255 SS_VER_NOT_PRES "not present" VALTAB VAL_ri VAL 1 RI_CIRCULAR "circular" VAL 3 RI_SEQUENTIAL "sequential" VAL 255 RI_NOT_PRES "not present" VALTAB VAL_parity VAL 0 PARITY_ODD "odd parity" VAL 2 PARITY_EVEN "even parity" VAL 3 PARITY_NONE "no parity" VAL 4 PARITY_FORCED_TO_0 "parity forced to zero" VAL 5 PARITY_FORCED_TO_1 "parity forced to one" VALTAB VAL_bearer_serv VAL 0 BEARER_SERV_SYNC "synchronous" VAL 1 BEARER_SERV_ASYNC "asynchronous" VAL 2 BEARER_SERV_PAD_ACCESS "PAD access (async)" VAL 3 BEARER_SERV_PACKET_ACCESS "packet access (sync)" VAL 4 BEARER_SERV_FAX "fax" VAL 5 BEARER_SERV_SPEECH "Speech" VAL 6 BEARER_SERV_AUX_SPEECH "Auxiliary Speech" VAL 7 BEARER_SERV_SPEECH_CTM "Speech with CTM (TTY) support" VAL 8 BEARER_SERV_AUX_SPEECH_CTM "Auxiliary Speech CTM (TTY) support" VAL 255 BEARER_SERV_NOT_PRES "not present" VALTAB VAL_modem_type VAL 0 MT_NONE "modem type none" VAL 1 MT_V21 "modem type V.21" VAL 2 MT_V22 "modem type V.22" VAL 3 MT_V22_BIS "modem type V.22bis" VAL 4 MT_V23 "modem type V.23" VAL 5 MT_V26_TER "modem type V.26ter" VAL 6 MT_V32 "modem type V.32" VAL 7 MT_UNDEF "modem type for undefined interface" VAL 8 MT_AUTOBAUD "modem type autobauding type 1" VAL 9 MT_V32_BIS "modem type V.32bis" VAL 10 MT_V34 "modem type V.34" VALTAB VAL_rate VAL 1 UR_0_3_KBIT "rate : 0.3 kbit/s Recommendation X.1 and V.110" VAL 2 UR_1_2_KBIT "rate : 1.2 kbit/s Recommendation X.1 and V.110" VAL 3 UR_2_4_KBIT "rate : 2.4 kbit/s Recommendation X.1 and V.110" VAL 4 UR_4_8_KBIT "rate : 4.8 kbit/s Recommendation X.1 and V.110" VAL 5 UR_9_6_KBIT "rate : 9.6 kbit/s Recommendation X.1 and V.110" VAL 6 UR_12_0_KBIT_TRANS "rate : 12.0 kbit/s transparent" VAL 7 UR_1_2_KBIT_V23 "rate : 1.2 kbit/s/75 bit/s Recommendation V.23, X.1,V.110." VAL 8 UR_14_4_KBIT "rate : 14.4 kbit/s" VAL 255 UR_NOT_PRES "not present" VALTAB VAL_flow_control VAL 8 INBAND_FLOW_CONTROL "inband flow control (ISO 6429)" VAL 12 NO_FLOW_CONTROL "no flow control (COPnoFLCT)" VAL 255 OUTBAND_FLOW_CONTROL "outband flow control" VALTAB VAL_conn_elem VAL 0 CONN_ELEM_TRANS "transparent" VAL 1 CONN_ELEM_NON_TRANS "non transparent (RLP)" VAL 2 CONN_ELEM_TRANS_PREF "both, transparent preferred" VAL 3 CONN_ELEM_NON_TRANS_PREF "both, non transparent (RLP) preferred" VAL 255 CONN_ELEM_NOT_PRES "not present" VALTAB VAL_stop_bits VAL 0 STOP_1_BIT "one stop bit" VAL 1 STOP_2_BIT "two stop bits" VALTAB VAL_data_bits VAL 0 DATA_7_BIT "seven data bits" VAL 1 DATA_8_BIT "eight data bits" VALTAB VAL_diagnostic VAL 129 DIAG_MOC_BAR_CUG "Outgoing calls barred within CUG" VAL 130 DIAG_NO_CUG_SELECTED "No CUG selected" VAL 131 DIAG_UNKNOWN_CUG_INDEX "Unknown CUG index" VAL 132 DIAG_INCOMPAT_CUG_INDEX "CUG index incompatible with requested basic service" VAL 133 DIAG_CUG_FAIL_UNSPEC "CUG call Failure unspecified" VAL 134 DIAG_CLIR_NOT_SUBSCRIBED "CLIR not subscribed" VAL 135 DIAG_CCBS_POSSIBLE "CCBS possible" VAL 136 DIAG_CCBS_NOT_POSSIBLE "CCBS not possible" VALTAB VAL_ss_diag VAL 1 SS_DIAG_MOC_BAR_CUG "Outgoing calls barred within CUG" VAL 2 SS_DIAG_NO_CUG_SELECTED "No CUG selected" VAL 3 SS_DIAG_UNKNOWN_CUG_INDEX "Unknown CUG index" VAL 4 SS_DIAG_INCOMPAT_CUG_INDEX "CUG index incompatible with requested basic service" VAL 5 SS_DIAG_CUG_FAIL_UNSPEC "CUG call Failure unspecified" VAL 6 SS_DIAG_CLIR_NOT_SUBSCRIBED "CLIR not subscribed" VAL 7 SS_DIAG_CCBS_POSSIBLE "CCBS possible" VAL 8 SS_DIAG_CCBS_NOT_POSSIBLE "CCBS not possible" VAL 255 SS_DIAG_NOT_PROVIDED "Not Provided" VALTAB VAL_sns_mode VAL 0 SNS_MODE_VOICE "voice calls" VAL 1 SNS_MODE_VAF_VOICE "voice alternating FAX, voice first" VAL 2 SNS_MODE_FAX "FAX calls" VAL 3 SNS_MODE_VAD_VOICE "voice alternating data, voice first" VAL 4 SNS_MODE_DATA "data calls" VAL 5 SNS_MODE_VAF_FAX "voice alternating FAX, FAX first" VAL 6 SNS_MODE_VAD_DATA "voice alternating data, data first" VAL 7 SNS_MODE_VFD "voice followed by data" VALTAB VAL_dtmf_mod VAL 0 DTMF_MOD_AUTO "automatic mode with fixed duration" VAL 1 DTMF_MOD_MAN_START "manual mode start sending DTMF digit" VAL 2 DTMF_MOD_MAN_STOP "manual mode stop sending DTMF digit" VALTAB VAL_bc_mod VAL 0 BC_MOD_CODE "code bearer capabilities" VAL 1 BC_MOD_DECODE "decode bearer capabilities" VALTAB VAL_rcl_type VAL 0 RCL_CCBS "CCBS" VAL 1 RCL_CCBS_1 "treated as CCBS" VAL 2 RCL_CCBS_2 "treated as CCBS" VAL 3 RCL_CCBS_3 "treated as CCBS" VAL 4 RCL_CCBS_4 "treated as CCBS" VAL 5 RCL_CCBS_5 "treated as CCBS" VAL 6 RCL_CCBS_6 "treated as CCBS" VALTAB VAL_synccs VAL 0 SYNCCS_MPTY_EVENT "Multi party event" VAL 0xFFFF SYNCCS_NOT_PRESENT "Synchronization cause not present" VALTAB VAL_mpty_event VAL 0 MPTY_BUILD_SENT "BuildMPTY Invoke sent" VAL 1 MPTY_BUILD_FAIL "BuildMPTY Invoke failed" VAL 2 MPTY_BUILD_SUCCESS "BuildMPTY Invoke ok" VAL 3 MPTY_SPLIT_SENT "SplitMPTY Invoke sent" VAL 4 MPTY_SPLIT_FAIL "SplitMPTY Invoke failed" VAL 5 MPTY_SPLIT_SUCCESS "SplitMPTY Invoke Return Result ok" VAL 6 MPTY_HOLD_SENT "HoldMPTY Invoke sent" VAL 7 MPTY_HOLD_FAIL "HoldMPTY Invoke failed" VAL 8 MPTY_HOLD_SUCCESS "HoldMPTY Invoke ok" VAL 9 MPTY_RETRIEVE_SENT "RetrieveMPTY Invoke" VAL 10 MPTY_RETRIEVE_FAIL "RetrieveMPTY Invoke failed" VAL 11 MPTY_RETRIEVE_SUCCESS "RetrieveMPTY Invoke Return Result ok" VAL 0xFF MPTY_NOT_PRESENT "Parameter not present" VALTAB VAL_ctm_ena VAL 2 - 255 "reserved, to be treated as CTM not supported" VAL 0 CTM_DISABLED "CTM not supported" VAL 1 CTM_ENABLED "CTM supported" VALTAB VAL_ton VAL 0 TON_UNKNOWN "unknown" VAL 1 TON_INT_NUMB "international number" VAL 2 TON_NAT_NUMB "national number" VAL 3 TON_NET_SPEC_NUMB "network specific number" VAL 4 TON_DED_ACC_SC "dedicated access, short code" VAL 255 TON_NOT_PRES "type of number not present" VALTAB VAL_npi VAL 0 NPI_UNKNOW "unknown" VAL 1 NPI_ISDN_TEL_NUMB_PLAN "ISDN/telephony numbering plan" VAL 3 NPI_DATA_NUMB_PLAN "data numbering plan" VAL 4 NPI_TELEX_NUMB_PLAN "telex numbering plan" VAL 8 NPI_NAT_NUMB_PLAN "national numbering plan" VAL 9 NPI_PRIV_NUMB_PLAN "private numbering plan" VAL 255 NPI_NOT_PRES "numbering plan identification not present" VALTAB VAL_present VAL 0 PRES_PRES_ALLOW "presentation allowed" VAL 1 PRES_PRES_REST "presentation restricted" VAL 2 PRES_NUMB_NOT_AVAIL "number not available due to interworking" VAL 255 PRES_NOT_PRES "not present" VALTAB VAL_screen VAL 0 SCREEN_USER_PROV_NOT_SCREEN "user provided, not screened" VAL 1 SCREEN_USER_PROV_VER_PASS "user provided, verified and passed" VAL 2 SCREEN_USER_PROV_VER_FAIL "user provided, verified and failed" VAL 3 SCREEN_NET_PROV "network provided" VAL 255 SCREEN_IND_NOT_PRES "not present" VAR ti "transaction identifier" B VAL @p_mncc - VAL_ti@ VAR progress_desc "progress description" B VAL @p_mncc - VAL_progress_desc@ VAR fac_context "facility information element context" B VAL @p_mncc - VAL_fac_context@ VAR info_context "user to user message context" B VAL @p_mncc - VAL_info_context@ VAR pd "user to user protocol discriminator" B VAL @p_mncc - VAL_pd@ VAR c_info "length of user to user data" B VAR info "user to user information" B VAR serv "service code" B VAL @p_mncc - VAL_serv@ VAR cause "cause" S VAL @p_mncc - VAL_cause@ VAR nd "notification description" B VAL @p_mncc - VAL_nd@ VAR c_num "number of BCD digits" B VAR num "bcd" B VAR c_called_num "number of BCD digits" B VAR called_num "bcd" B VAR tos "type of subaddress" B VAL @p_mncc - VAL_tos@ VAR odd_even "odd / even indicator" B VAL @p_mncc - VAL_odd_even@ VAR c_subaddr "length of subaddress information" B VAR subaddr "subaddress information" B VAR key "DTMF digit" B VAL @p_mncc - VAL_key@ VAR ch_type "Channel Type" B VAL @p_mncc - VAL_ch_type@ VAR ch_mode "Channel Mode" B VAL @p_mncc - VAL_ch_mode@ VAR more_data "more data" B VAL @p_mncc - VAL_more_data@ VAR prio "priority" B VAL @p_mncc - VAL_prio@ VAR clir_sup "CLIR suppression" B VAL @p_mncc - VAL_clir_sup@ VAR sig "signal" B VAL @p_mncc - VAL_sig@ VAR congest_lev "Congestion Level" B VAL @p_mncc - VAL_congest_lev@ VAR ss_version "SS Version number" B VAL @p_mncc - VAL_ss_version@ VAR ri "repeat indicator" B VAL @p_mncc - VAL_ri@ VAR rate "user rate" B VAL @p_mncc - VAL_rate@ VAR bearer_serv "bearer service" B VAL @p_mncc - VAL_bearer_serv@ VAR conn_elem "connection element" B VAL @p_mncc - VAL_conn_elem@ VAR stop_bits "stop bits" B VAL @p_mncc - VAL_stop_bits@ VAR data_bits "data bits" B VAL @p_mncc - VAL_data_bits@ VAR parity "parity" B VAL @p_mncc - VAL_parity@ VAR flow_control "flow control" B VAL @p_mncc - VAL_flow_control@ VAR modem_type "modem type" B VAL @p_mncc - VAL_modem_type@ VAR l_fac "facility length" S VAR o_fac "facility offset" S VAR fac "facility content" B VAR diagnostic "Diagnostic Information" B VAL @p_mncc - VAL_diagnostic@ VAR sns_mode "Single numbering scheme mode" B VAL @p_mncc - VAL_sns_mode@ VAR dtmf_mod "Mode for sending DTMF digit" B VAL @p_mncc - VAL_dtmf_mod@ VAR bc_mod "Mode for conversion of bearer capabilities" B VAL @p_mncc - VAL_bc_mod@ VAR bc_len "coded bearer cap length" B VAR bc "coded bearer cap" B VAR req_id "Request identifier of originator" B VAR rcl_type "recall type" B VAL @p_mncc - VAL_rcl_type@ VAR synccs "Synchronization cause" S VAL @p_mncc - VAL_synccs@ VAR mpty_event "multi party event" B VAL @p_mncc - VAL_mpty_event@ VAR c_redir_num "number of BCD digits" B VAR redir_num "bcd" B VAR ctm_ena "CTM support send to NW in BC indicating speech" B VAL @p_mncc - VAL_ctm_ena@ VAR ton "type of number" B VAL @p_mncc - VAL_ton@ VAR npi "numbering plan identification" B VAL @p_mncc - VAL_npi@ VAR present "presentation indicator" B VAL @p_mncc - VAL_present@ VAR screen "screening indicator" B VAL @p_mncc - VAL_screen@ VAR ss_diag "Supplementary Diagnostic Element" B VAL @p_mncc - VAL_ss_diag@ VAR c_raw_cause "Number of cause bytes" B VAR raw_cause "cause as received from network" B COMP user "user to user data" { info_context ; user to user message context pd ; user to user protocol discriminator c_info ; length of user to user data info [USER_LEN] ; user to user information } COMP calling_party "calling party" { ton ; type of number npi ; numbering plan identification present ; presentation indicator screen ; screening indicator c_num ; number of BCD digits num [MAX_CC_CALLING_NUMBER] ; bcd } TYPEDEF COMP calling_party connected_number "connected number" COMP called_party "called party address" { ton ; numbering type npi ; numbering plan c_called_num ; number of BCD digits called_num [MAX_CC_CALLED_NUMBER] ; bcd } COMP calling_party_sub "calling party subaddress" { tos ; type of subaddress odd_even ; odd / even indicator c_subaddr ; length of subaddress information subaddr [SUB_LENGTH] ; subaddress information } TYPEDEF COMP calling_party_sub called_party_sub "called party subaddress" TYPEDEF COMP calling_party_sub connected_number_sub "connected number subaddress" TYPEDEF COMP calling_party_sub redirecting_party_sub "redirecting party subaddress" COMP chm "Channel using mode" { ch_type ; Channel Type ch_mode ; Channel Mode } COMP bcpara "bearer capability parameter" { rate ; user rate bearer_serv ; bearer service conn_elem ; connection element stop_bits ; stop bits data_bits ; data bits parity ; parity flow_control ; flow control modem_type ; modem type } TYPEDEF COMP bcpara bcpara2 "bearer capability parameter" COMP fac_inf "facility information" { l_fac ; facility length o_fac ; facility offset fac [FACILITY_LEN] ; facility content } COMP bcconf "bearer capability configuration" { bc_len ; coded bearer cap length bc [MAX_BC_LEN] ; coded bearer cap } TYPEDEF COMP bcconf bcconf2 "second bearer capability configuration" COMP redirecting_party "redirecting party address" { ton ; numbering type npi ; numbering plan present ; presentation indicator screen ; screening indicator c_redir_num ; number of BCD digits redir_num [MAX_CC_REDIR_NUMBER] ; bcd } ; MNCC_ALERT_IND 0x8000400B ; MNCC_CALL_PROCEED_IND 0x8001400B ; MNCC_DISCONNECT_IND 0x8002400B ; MNCC_HOLD_CNF 0x8003400B ; MNCC_MODIFY_CNF 0x8004400B ; MNCC_MODIFY_IND 0x8005400B ; MNCC_NOTIFY_IND 0x8006400B ; MNCC_PROGRESS_IND 0x8007400B ; MNCC_REJECT_IND 0x8008400B ; MNCC_RELEASE_CNF 0x8009400B ; MNCC_RELEASE_IND 0x800A400B ; MNCC_RETRIEVE_CNF 0x800B400B ; MNCC_SETUP_CNF 0x800C400B ; MNCC_SETUP_COMPL_IND 0x800D400B ; MNCC_SETUP_IND 0x800E400B ; MNCC_START_DTMF_CNF 0x800F400B ; MNCC_BEARER_CAP_CNF 0x8013400B ; MNCC_SYNC_IND 0x8010400B ; MNCC_USER_IND 0x8011400B ; MNCC_FACILITY_IND 0x8012400B ; MNCC_PROMPT_IND 0x8014400B ; MNCC_RECALL_IND 0x8015400B ; MNCC_STATUS_IND 0x8016400B ; MNCC_SETUP_REQ 0x8000000B ; MNCC_SETUP_RES 0x8001000B ; MNCC_ALERT_REQ 0x8002000B ; MNCC_DISCONNECT_REQ 0x8003000B ; MNCC_RELEASE_REQ 0x8004000B ; MNCC_MODIFY_REQ 0x8005000B ; MNCC_CONFIGURE_REQ 0x8006000B ; MNCC_NOTIFY_REQ 0x8007000B ; MNCC_START_DTMF_REQ 0x8008000B ; MNCC_HOLD_REQ 0x8009000B ; MNCC_RETRIEVE_REQ 0x800A000B ; MNCC_FACILITY_REQ 0x800B000B ; MNCC_USER_REQ 0x800C000B ; MNCC_BEARER_CAP_REQ 0x800D000B ; MNCC_PROMPT_RSP 0x800E000B ; MNCC_PROMPT_REJ 0x800F000B ; MNCC_REJECT_REQ 0x8010000B ; MNCC_SYNC_REQ 0x8011000B ; MNCC_STATUS_RES 0x8012000B PRIM MNCC_ALERT_IND 0x8000400B { ti ; transaction identifier progress_desc ; progress indicator } PRIM MNCC_CALL_PROCEED_IND 0x8001400B { ti ; transaction identifier progress_desc ; progress indicator ri ; repeat indicator bcpara ; bearer cap parameter bcpara2 ; bearer cap parameter } PRIM MNCC_DISCONNECT_IND 0x8002400B { ti ; transaction identifier cause ; cause; The following causes can occur within this primitive: all those of 4.6 defined by the GSM standard and originated by the network, i.e. those starting with 0b00... and MNCC_CAUSE_MS_COND_INFO_ELEM, MNCC_CAUSE_MS_INVALID_MAND_INFO and all those previously indicated via MNCC_DISCONNECT_REQ. diagnostic ; Additional cause info ss_diag ; Additional supplementary service diagnostic info progress_desc ; progress description c_raw_cause ; Number of cause bytes raw_cause [MAX_CC_CAUSE_LENGTH] ; cause as received from NW } PRIM MNCC_HOLD_CNF 0x8003400B { ti ; transaction identifier cause ; Cause; The following causes can occur within this primitive: all those of 4.6 defined by the GSM standard and originated by the network, i.e. those starting with 0b00... and MNCC_CAUSE_HOLD_SUCCESS. It is possible for the network to not add a Cause IE. In this case, cause is MNCC_CAUSE_NO_NET_CAUSE } PRIM MNCC_MODIFY_CNF 0x8004400B { ti ; transaction identifier cause ; cause; The following causes can occur within this primitive: all those of 4.6 defined by the GSM standard and originated by the network, i.e. those starting with 0b00... and MNCC_CAUSE_MODIFY_SUCCESS, MNCC_CAUSE_MS_TIMER. } PRIM MNCC_MODIFY_IND 0x8005400B { ti ; transaction identifier serv ; service code } PRIM MNCC_NOTIFY_IND 0x8006400B { ti ; transaction identifier nd ; notification } PRIM MNCC_PROGRESS_IND 0x8007400B { ti ; transaction identifier progress_desc ; progress indicator } PRIM MNCC_REJECT_IND 0x8008400B { ti ; transaction identifier cause ; reject cause; The following causes can occur within this primitive: MNCC_CAUSE_MS_INCOMPAT_DEST, MNCC_CAUSE_MS_TIMER of 4.6 and all possible within the MMCC_RELEASE_IND and MMCC_ERROR_IND primitives of the MMCC SAP. } PRIM MNCC_RELEASE_CNF 0x8009400B { ti ; transaction identifier cause ; cause; The following causes can occur within this primitive: all those of 4.6 defined by the GSM standard and originated by the network, i.e. those starting with 0b00... and MNCC_CAUSE_NO_NET_CAUSE and MNCC_CAUSE_MS_MESSAGE_INCOMPAT, MNCC_CAUSE_MS_TIMER. c_raw_cause ; Number of cause bytes raw_cause [MAX_CC_CAUSE_LENGTH] ; cause as received from NW } PRIM MNCC_RELEASE_IND 0x800A400B { ti ; transaction identifier cause ; cause; The following causes can occur within this primitive: all those of 4.6 defined by the GSM standard and originated by the network, i.e. those starting with 0b00... and MNCC_CAUSE_NO_NET_CAUSE and MNCC_CAUSE_MS_MESSAGE_INCOMPAT, MNCC_CAUSE_MS_INVALID_TI, MNCC_CAUSE_MS_BEARER_NOT_IMPLEM, MNCC_CAUSE_MS_COND_INFO_ELEM, MNCC_CAUSE_MS_INVALID_MAND_INFO, MNCC_CAUSE_MAX_NO_CALLS_REACHED, MNCC_CAUSE_MAX_NO_RECALLS_REACHED, MNCC_CAUSE_MS_INCOMPAT_DEST, MNCC_CAUSE_MS_FACILITY_REJECT, MNCC_CAUSE_MS_TIMER of 4.6 and all possible within the MMCC_RELEASE_IND (CCBS) and all causes sent by higher layers within MNCC_DISCONNECT_REQ (CCBS and when no network connection) and the MMCC_ERROR_IND primitive of the MMCC SAP. c_raw_cause ; Number of cause bytes raw_cause [MAX_CC_CAUSE_LENGTH] ; cause as received from NW } PRIM MNCC_RETRIEVE_CNF 0x800B400B { ti ; transaction identifier cause ; cause; The following causes can occur within this primitive: all those of 4.6 defined by the GSM standard and originated by the network, i.e. those starting with 0b00... and MNCC_CAUSE_RETRIEVE_SUCCESS. It is possible for the network to not add a Cause IE. In this case, cause is MNCC_CAUSE_NO_NET_CAUSE } PRIM MNCC_SETUP_CNF 0x800C400B { ti ; transaction identifier cause ; (resulting) cause; The following causes can occur within this primitive: MNCC_CAUSE_SUCCESS, MNCC_CAUSE_MS_TIMER. progress_desc ; progress description connected_number ; connected number connected_number_sub ; connected sub address } PRIM MNCC_SETUP_COMPL_IND 0x800D400B { ti ; transaction identifier cause ; (resulting) cause; The following causes can occur within this primitive: MNCC_CAUSE_SUCCESS, MNCC_CAUSE_MS_TIMER. } PRIM MNCC_SETUP_IND 0x800E400B { ti ; transaction identifier ri ; repeat indicator bcpara ; bearer cap parameter bcpara2 ; bearer cap parameter progress_desc ; progress indicator sig ; signal calling_party ; calling party calling_party_sub ; calling party sub called_party ; called party called_party_sub ; called party sub redirecting_party ; redirecting party redirecting_party_sub ; redirecting party sub } PRIM MNCC_START_DTMF_CNF 0x800F400B { ti ; transaction identifier key ; keypad digit cause ; cause; The following causes can occur within this primitive: all those of 4.6 defined by the GSM standard and originated by the network, i.e. those starting with 0b00... and MNCC_CAUSE_DTMF_NOT_ALLOWED, MNCC_CAUSE_DTMF_BUFFER_FULL, MNCC_CAUSE_DTMF_ABORTED, MNCC_CAUSE_DTMF_START_SUCCESS, MNCC_CAUSE_MS_TIMER. dtmf_mod ; dtmf mode } PRIM MNCC_BEARER_CAP_CNF 0x8013400B { req_id ; request id bc_mod ; conversion mode bcconf ; coded bearer cap bcpara ; decoded bearer cap bcconf2 ; coded bearer cap2 bcpara2 ; decoded bearer cap2 cause ; translation cause; The following causes can occur within this primitive: MNCC_CAUSE_SUCCESS, MNCC_CAUSE_MS_INCOMPAT_DEST. } PRIM MNCC_SYNC_IND 0x8010400B { ti ; transaction identifier cause ; cause; The following causes can occur within this primitive: MNCC_CAUSE_CHANNEL_SYNC, MNCC_CAUSE_REEST_STARTED, MNCC_CAUSE_REEST_FINISHED. chm ; channel mode } PRIM MNCC_USER_IND 0x8011400B { ti ; transaction identifier congest_lev ; congestion level more_data ; more data user ; user to user } PRIM MNCC_FACILITY_IND 0x8012400B { ti ; transaction identifier fac_context ; facility context fac_inf ; facility information } PRIM MNCC_PROMPT_IND 0x8014400B { } PRIM MNCC_RECALL_IND 0x8015400B { ti ; transaction identifier ri ; repeat indicator bcpara ; bearer cap parameter bcpara2 ; bearer cap parameter called_party ; called party address called_party_sub ; called party sub rcl_type ; recall type } PRIM MNCC_STATUS_IND 0x8016400B { ti ; transaction identifier } PRIM MNCC_SETUP_REQ 0x8000000B { ti ; transaction identifier prio ; priority ri ; repeat indicator bcpara ; bearer cap parameter bcpara2 ; bearer cap parameter called_party ; called party address called_party_sub ; called party sub clir_sup ; clir suppression fac_inf ; facility information } PRIM MNCC_SETUP_RES 0x8001000B { ti ; transaction identifier } PRIM MNCC_ALERT_REQ 0x8002000B { ti ; transaction identifier } PRIM MNCC_DISCONNECT_REQ 0x8003000B { ti ; transaction identifier cause ; cause; Only standard-defined, MS originated values shall be used which are in addition compliant to the CC peer to peer protocol. fac_inf ; facility information ss_version ; ss version } PRIM MNCC_RELEASE_REQ 0x8004000B { ti ; transaction identifier cause ; cause; Only standard-defined, MS originated values shall be used which are in addition compliant to the CC peer to peer protocol. In addition MNCC_CAUSE_NO_MS_CAUSE could be used if compliant to the CC peer to peer protocol in the current situation. fac_inf ; facility information ss_version ; ss version } PRIM MNCC_MODIFY_REQ 0x8005000B { ti ; transaction identifier serv ; service code } PRIM MNCC_CONFIGURE_REQ 0x8006000B { called_party_sub ; called party subaddress bcpara ; bearer cap parameter sns_mode ; single numbering mode ctm_ena ; CTM support enabled } PRIM MNCC_NOTIFY_REQ 0x8007000B { ti ; transaction identifier nd ; notification description } PRIM MNCC_START_DTMF_REQ 0x8008000B { ti ; transaction identifier key ; keypad digit dtmf_mod ; DTMF mode } PRIM MNCC_HOLD_REQ 0x8009000B { ti ; transaction identifier } PRIM MNCC_RETRIEVE_REQ 0x800A000B { ti ; transaction identifier } PRIM MNCC_FACILITY_REQ 0x800B000B { ti ; transaction identifier fac_inf ; facility information ss_version ; ss version } PRIM MNCC_USER_REQ 0x800C000B { ti ; transaction identifier congest_lev ; congestion level more_data ; more data user ; user to user } PRIM MNCC_BEARER_CAP_REQ 0x800D000B { req_id ; request id bc_mod ; conversion mode bcconf ; coded bearer cap bcpara ; decoded bearer cap bcconf2 ; coded bearer cap2 bcpara2 ; decoded bearer cap2 } PRIM MNCC_PROMPT_RSP 0x800E000B { ti ; transaction identifier } PRIM MNCC_PROMPT_REJ 0x800F000B { } PRIM MNCC_REJECT_REQ 0x8010000B { ti ; transaction identifier cause ; cause; Only standard-defined, MS originated values shall be used which are in addition compliant to the CC peer to peer protocol. In addition MNCC_CAUSE_NO_MS_CAUSE could be used if compliant to the CC peer to peer protocol in the current situation. } PRIM MNCC_SYNC_REQ 0x8011000B { synccs ; synchronization cause ti ; transaction identifier mpty_event ; multi party event } PRIM MNCC_STATUS_RES 0x8012000B { ti ; transaction identifier }