FreeCalypso > hg > fc-magnetite
view cdg211/prim/ra.pdf @ 660:293c7db5f10f
bmi3: fixed the mysterious "mute on first call" bug
When UI-enabled fw boots on a previously blank (no /mmi/* files) FFS
for the first time, the output_volume member of the persistent UI settings
structure was left uninitialized, corresponding to the earpiece volume
being set to mute, which is an invalid setting. Because of other quirks
in the far-from-finished UI code, this volume setting takes effect only
when the first call is answered, producing the odd behaviour seen at the
user level.
The current fix is to set the blank-FFS default for output_volume to
volume level 4, which is the same -6 dB Iota volume as the ACI default.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 14 May 2020 02:50:41 +0000 |
parents | 56abf6cf8a0b |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : ra.pdf ;*** Creation : Fri Jun 08 13:58:18 CST 2007 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : ra ;*** Document No. : 8411.102.98.204 ;*** Document Date : 2002-04-26 ;*** Document Status: BEING_PROCESSED ;*** Document Author: SLO ;******************************************************************************** PRAGMA SRC_FILE_TIME "Mon Nov 24 15:51:06 2003" PRAGMA LAST_MODIFIED "2002-04-26" PRAGMA ID_AND_VERSION "8411.102.98.204" CONST DUMMY_RA 0 ; Dummy VALTAB VAL_model VAL 0 RA_MODEL_SPEECH "model speech" VAL 1 RA_MODEL_TRANS "model 1b async transparent" VAL 2 RA_MODEL_RLP "model 3b async nontransparent" VAL 3 RA_MODEL_FAX "model 5b fax 3.45" VALTAB VAL_tra_rate VAL 0 TRA_FULLRATE_2400 "fullrate 2,4/3,6 kBit" VAL 1 TRA_HALFRATE_2400 "halfrate 2,4/3,6 kBit" VAL 2 TRA_FULLRATE_4800 "fullrate 4,8/6 kBit" VAL 3 TRA_HALFRATE_4800 "halfrate 4,8/6 kBit" VAL 4 TRA_FULLRATE_9600 "fullrate 9,6/12 kBit" VAL 5 TRA_FULLRATE_14400 "fullrate 13,4/14,4 kBit" VALTAB VAL_user_rate VAL 0 URA_300 "user rate 300bps" VAL 1 URA_1200 "user rate 1200bps" VAL 2 URA_2400 "user rate 2400bps" VAL 3 URA_4800 "user rate 4800bps" VAL 4 URA_9600 "user rate 9600bps" VAL 5 URA_1200_75 "user rate 1200/75bps" VAL 6 URA_14400 "user rate 14400bps" VALTAB VAL_dtx_flg VAL 0 DTX_DIS "Disable DTX" VAL 1 DTX_EN "Enable DTX" VALTAB VAL_fr_type VAL 0x00 FR_T4DATA "GSM 3.45 Data frame" VAL 0x01 FR_STATUS "GSM 3.45 Status (BCS) frame" VAL 0x02 FR_SYNC "GSM 3.45 Sync frame" VAL 0x03 FR_TRAIN "GSM 3.45 Status (TRAIN) frame" VAL 0x04 FR_TRANS "Transparent Data frame" VAL 0x05 FR_RLP "Valid RLP frame" VAL 0x0F FR_INVALID "Invalid frame or FCS error detected in RLP mode" VALTAB VAL_status VAL 1 ST_SA "Status SA" VAL 2 ST_SB "Status SB" VAL 4 ST_X "Status X" VAL 8 ST_OVER "Overspeed flag" VALTAB VAL_ack_flg VAL 0 RA_ACK "acknowledged" VAL 1 RA_NAK "not acknowledged" VALTAB VAL_detect VAL 0 DET_NO_STATUS "do not detect status frames" VAL 1 DET_STATUS "detect status frames" VALTAB VAL_tick_dir VAL 1 TICK_UL "tick uplink" VAL 2 TICK_DL "tick downlink" VAL 3 TICK_UL_DL "tick uplink & downlink" VALTAB VAL_offset VAL 0 ra_conf "Configurations" VAL 1 ra_act "Activities" VAL 2 ra_test "Test" VAL 3 ra_statu "Uplink status" VAL 4 ra_statd "Downlink status" VAL 5 fax_status_det "Fax status detection" VAL 6 rau "Buffer for uplink characters" VAL 7 rad "Buffer for downlink characters" VAL 8 ntu "Buffer for uplink RLP frames" VAL 9 ntd "Buffer for downlink RLP frames" VAL 10 faxu "Buffer for uplink fax data" VAL 11 faxd "Buffer for downlink fax data" VAR model "transfer protocol model" B VAL @p_ra - VAL_model@ VAR tra_rate "transmission rate" B VAL @p_ra - VAL_tra_rate@ VAR user_rate "user rate" B VAL @p_ra - VAL_user_rate@ VAR l_buf "length of content in bit" S VAR o_buf "offset of content in bit" S VAR buf "buffer content" B VAR dtx_flg "discontinuous transmission flag" B VAL @p_ra - VAL_dtx_flg@ VAR req_frames "requested frames" B VAR fr_type "frame type" B VAL @p_ra - VAL_fr_type@ VAR reserved "Reserved" B VAR status "V24 Status" B VAL @p_ra - VAL_status@ VAR break_len "Break Length" S VAR ndb "number data bits" B VAR nsb "number stop bits" B VAR ack_flg "acknowledge flag" B VAL @p_ra - VAL_ack_flg@ VAR detect "Detect mode" B VAL @p_ra - VAL_detect@ VAR tick_dir "tick direction" B VAL @p_ra - VAL_tick_dir@ VAR id "Bit Identity" B VAR offset "Address offset" B VAL @p_ra - VAL_offset@ VAR mask "Bit mask" S VAR value "Bits value" S COMP sdu "Service Data Unit" { l_buf ; length of content in bit o_buf ; offset of content in bit buf [1] ; buffer content } ; RA_ACTIVATE_REQ 0x80000010 ; RA_DEACTIVATE_REQ 0x80010010 ; RA_READY_IND 0x80004010 ; RA_DATA_REQ 0x80020010 ; RA_BREAK_REQ 0x80030010 ; RA_DATA_IND 0x80014010 ; RA_ACTIVATE_CNF 0x80024010 ; RA_DEACTIVATE_CNF 0x80034010 ; RA_BREAK_IND 0x80044010 ; RA_DETECT_REQ 0x80040010 ; RA_MODIFY_REQ 0x80050010 ; RA_MODIFY_CNF 0x80054010 ; RA_DATATRANS_REQ 0x80060010 ; SHM_TICK_REQ 0x80070010 ; SHM_DATA_REQ 0x80080010 ; SHM_READ_REQ 0x80090010 ; SHM_DATA_IND 0x80064010 ; SHM_BITSET_REQ 0x800A0010 ; SHM_BITTEST_REQ 0x800B0010 ; SHM_BITTEST_IND 0x80074010 PRIM RA_ACTIVATE_REQ 0x80000010 { model ; transfer protocol model tra_rate ; transmission rate user_rate ; user rate ndb ; number data bits nsb ; number stop bits } PRIM RA_DEACTIVATE_REQ 0x80010010 { } PRIM RA_READY_IND 0x80004010 { req_frames ; requested frames } PRIM RA_DATA_REQ 0x80020010 { fr_type ; frame type dtx_flg ; discontinuous transmission flag status ; V.24 Status reserved ; reserved sdu ; service data unit } PRIM RA_BREAK_REQ 0x80030010 { break_len ; Break length } PRIM RA_DATA_IND 0x80014010 { fr_type ; frame type status ; V.24 Status reserved ; reserved sdu ; service data unit } PRIM RA_ACTIVATE_CNF 0x80024010 { ack_flg ; acknowledge flag } PRIM RA_DEACTIVATE_CNF 0x80034010 { } PRIM RA_BREAK_IND 0x80044010 { break_len ; Break length } PRIM RA_DETECT_REQ 0x80040010 { detect ; Detect mode } PRIM RA_MODIFY_REQ 0x80050010 { tra_rate ; transmission rate user_rate ; user rate } PRIM RA_MODIFY_CNF 0x80054010 { } PRIM RA_DATATRANS_REQ 0x80060010 { } PRIM SHM_TICK_REQ 0x80070010 { tick_dir ; tick direction } PRIM SHM_DATA_REQ 0x80080010 { fr_type ; frame type dtx_flg ; discontinuous transmission flag status ; V.24 Status reserved ; Reserved sdu ; service data unit } PRIM SHM_READ_REQ 0x80090010 { model ; transfer protocol model } PRIM SHM_DATA_IND 0x80064010 { fr_type ; frame type status ; V.24 Status reserved ; reserved sdu ; service data unit } PRIM SHM_BITSET_REQ 0x800A0010 { id ; Bit identity value ; Bits Value } PRIM SHM_BITTEST_REQ 0x800B0010 { offset ; Address offset mask ; Bit mask } PRIM SHM_BITTEST_IND 0x80074010 { value ; Bits Value }