FreeCalypso > hg > fc-magnetite
view cdg211/prim/rrgrr.pdf @ 660:293c7db5f10f
bmi3: fixed the mysterious "mute on first call" bug
When UI-enabled fw boots on a previously blank (no /mmi/* files) FFS
for the first time, the output_volume member of the persistent UI settings
structure was left uninitialized, corresponding to the earpiece volume
being set to mute, which is an invalid setting. Because of other quirks
in the far-from-finished UI code, this volume setting takes effect only
when the first call is answered, producing the odd behaviour seen at the
user level.
The current fix is to set the blank-FFS default for output_volume to
volume level 4, which is the same -6 dB Iota volume as the ACI default.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 14 May 2020 02:50:41 +0000 |
parents | 56abf6cf8a0b |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : rrgrr.pdf ;*** Creation : Fri Jun 08 13:58:24 CST 2007 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : rrgrr ;*** Document No. : 8441.112.03.031 ;*** Document Date : 2003-11-19 ;*** Document Status: BEING_PROCESSED ;*** Document Author: SAB ;******************************************************************************** PRAGMA SRC_FILE_TIME "Tue Jan 31 13:51:40 2006" PRAGMA LAST_MODIFIED "2003-11-19" PRAGMA ID_AND_VERSION "8441.112.03.031" CONST RRGRR_MAX_ARFCN_NCELL_SYNC_REQ 12 ; maximum number of frequencies to be synchronised for cell re-selection and EOTD CONST RRGRR_MAX_RSLT_NCELL_SYNC_IND 6 ; maximum number of results of synchronisation attempts for cell re-selection CONST RRGRR_MAX_ARFCN_EXT_MEAS 64 ; maximum number of frequencies during Extended Measurement CONST RRGRR_BA_LIST_SIZE 32 ; BA list size CONST RRGRR_MEAS_REP_LIST_SIZE 7 ; Measurement report list size (1 serving and 6 neighbour cells) CONST SIZE_MCC 3 ; maximum number of BCD digits of the mobile country code CONST SIZE_MNC 3 ; maximum number of BCD digits of the mobile network code VALTAB VAL_cause VAL 0 GPRS_NOT_SUPPORTED "Serving cell does not support GPRS" VAL 1 GPRS_SUPPORTED "Serving cell supports GPRS" VAL 2 GPRS_CELL_NOT_SUITABLE "for GRR-controlled cell reselection" VALTAB VAL_si_to_read VAL 0 UNSPECIFIED_SI "Update of unspecified SI message or SI messages" VAL 1 UPDATE_SI1 "Update of SI1 message" VAL 2 UPDATE_SI2_SI2BIS_OR_SI2TER "Update of SI2, SI2 bis or SI2 ter message" VAL 3 UPDATE_SI3_SI4_SI7_OR_SI8 "Update of SI3, SI4, SI7 or SI8 message" VAL 4 UPDATE_SI9 "Update of SI9 message" VAL 5 COMPLETE_SI "Read complete SI" VAL 255 UPDATE_SI13 "Update or read of SI13" VALTAB VAL_si1_state VAL 0 SI1_NOT_SEND "SI not send" VAL 1 SI1_RECEIVED "SI received" VAL 2 SI1_NOT_RECEIVED "SI not received" VALTAB VAL_si3_state VAL 0 SI3_NOT_SEND "SI not send" VAL 1 SI3_RECEIVED "SI received" VAL 2 SI3_NOT_RECEIVED "SI not received" VALTAB VAL_si13_state VAL 0 SI13_NOT_SEND "SI not send" VAL 1 SI13_RECEIVED "SI received" VAL 2 SI13_NOT_RECEIVED "SI not received" VALTAB VAL_pg_type VAL 0 RRGRR_IMSI "MS is paged by IMSI" VAL 1 RRGRR_PTMSI "MS is paged by PTMSI (GPRS TMSI)" VALTAB VAL_rr_est VAL 0 RR_EST_NOT_ALLOWED "RR establishment not allowed" VAL 1 RR_EST_ALLOWED "RR establishment allowed" VALTAB VAL_susp_req VAL 0 SUSPENSION_REQ_NOT_NEEDED "RR need not send GPRS suspension request" VAL 1 SUSPENSION_REQ_NEEDED "RR has to send GPRS suspension request" VALTAB VAL_r_bit VAL 0 CHAN_REQ_SENT_ONCE "MS has sent channel request only once" VAL 1 CHAN_REQ_SENT_MORE "MS has sent channel request twice or more" VALTAB VAL_old_ptmsi VAL 0xFFFFFFFF RRGRR_PTMSI_INVALID "P-TMSI or TMSI invalid (see GSM 3.03)" VALTAB VAL_stop_cause VAL 3 CONTENTION_RESOLUTION_FAIL "Establishment fails due to contention resolution" VAL 4 DL_ESTABLISHMENT_FAIL "Layer 2 establishment failure" VALTAB VAL_arfcn VAL 1 - 124 "GSM 900 without extension band" VAL 1 - 174 "GSM 900 with extension band" VAL 512 - 810 "PCS 1900" VAL 512 - 885 "DCS 1800" VAL 1 - 498 "Dual band(GSM/DCS)" VAL 1 - 548 "Dual band(EGSM/DCS)" VAL 0xFFFF RRGRR_INVALID_ARFCN "Used to mark a channel number entry as invalid." VALTAB VAL_sb_flag VAL 0 NO_SB_FOUND "synchronisation burst not found" VAL 1 SB_FOUND "synchronisation burst found" VAL 2 SB_UNKNOWN "status of synchronisation burst unknown" VALTAB VAL_bsic VAL 0 - 63 "base station identification code" VAL 255 RRGRR_INVALID_BSIC "Used to identify a BSIC entry as invalid" VALTAB VAL_cr_type VAL 0 CR_NEW "RR has to reselect the given cell" VAL 1 CR_COMPLETE "RR has to camp on this cell" VAL 2 CR_CONT "Continue cell reselection." VAL 3 CR_CS "start cell selection process again" VAL 4 CR_NEW_NOT_SYNCED "start cr for not syncd cell (ie. PCCO)" VAL 124 CR_SUSPENDED_IDLE "start idle procedures" VAL 125 CR_REQ_CANDIDATE "inform GRR that is has to start a CR" VAL 126 CR_NORMAL "Do not abort TBF" VAL 127 CR_ABNORMAL "Abort TBF" VALTAB VAL_sync_res VAL 0 SYNC_OK "Synchronisation OK" VAL 1 SYNC_FAILED "Synchronisation failed" VALTAB VAL_cell_type VAL 0 SYNC_SCELL "Synchronisation to serving cell" VAL 1 SYNC_NCELL "Synchronisation to neighbour cell" VALTAB VAL_pag_mode VAL 0 PAG_MODE_LAST_ONE "RR shall use the last page (before pag_Reorg)" VAL 1 PAG_MODE_REORG "RR shall use Paging reorg mode" VAL 2 PAG_MODE_PTM_NP "RR shall use the NORMAL paging in packet transfer mode, start only CCCH" VAL 3 PAG_MODE_PIM_NP "RR shall start only CCCH with REORG and change to NORMAL paging" VAL 255 PAG_MODE_DEFAULT "RR shall use the default paging mode and goes to idle mode" VALTAB VAL_split_pg VAL 704 RRGRR_NO_DRX "Non DRX mode" VALTAB VAL_rac VAL 0xFF RRGRR_RAC_INVALID "routing area code invalid" VALTAB VAL_reconn_state VAL 0 RECONN_OK "The reconnection to the 'old' channel was cuessful" VAL 1 RECONN_LOW_FAIL "A Lower Layer Failure occured during the reconnection." VALTAB VAL_reconn_cause VAL 0b00000000 RECONN_NORM_EVENT "Normal event" VAL 0b00000001 RECONN_UNSPECIFIED "Abnormal release, unspecified" VAL 0b00000010 RECONN_CHN_UNACCEPTABLE "Abnormal release, channel unacceptable" VAL 0b00000011 RECONN_TIMER_EXPIRED "Abnormal release, timer expired" VAL 0b00000100 RECONN_NO_ACTIVITY "Abnormal release, no activity on the radio path" VAL 0b00000101 RECONN_PREEMPTIVE "Preemptive release" VAL 0b00001000 RECONN_TA_OUT_OF_RANGE "Handover impossible, timing advance out of range" VAL 0b00001001 RECONN_CHANNEL_MODE "Channel mode unacceptable" VAL 0b00001010 RECONN_FREQ_NOT_IMPL "Frequency not implemented" VAL 0b01000001 RECONN_CALL_CLEARED "Call already cleared" VAL 0b01011111 RECONN_INCORRECT_SEMANTIC "Semantically incorrect message" VAL 0b01100000 RECONN_INVALID_INFO "Invalid mandatory information" VAL 0b01100001 RECONN_UNKNWN_MSG_TYPE "Message type non-existent or not implemented" VAL 0b01100010 RECONN_INCMPTBLE_MSG_TYPE "Message type not compatible with protocol state" VAL 0b01100100 RECONN_COND_IE_ERROR "Conditional IE error" VAL 0b01100101 RECONN_NO_CELL_ALLOC "No cell allocation available" VAL 0b01101111 RECONN_PROT_UNSPECIFIED "Protocol error unspecified" VALTAB VAL_ident_type VAL 1 ID_IMSI "Paged by IMSI" VAL 4 ID_TMSI "Paged by TMSI" VAL 8 ID_PTMSI "Paged by PTMSI" VALTAB VAL_report_type VAL 0 REP_TYPE_1 "synchronize to the 6 strongest carriers and provide their BSICs" VAL 1 REP_TYPE_2 "synchronize to carriers in decreasing field strength until the BSICs for 6 carriers with allowed NCC are fully decoded" VAL 2 REP_TYPE_3 "no synchronization, no BSICs are provided" VAL 3 REP_TYPE_RES "reserved, ignore request for measurement data in this version" VALTAB VAL_xmeas_cause VAL 0 EXT_MEAS_OK "The results of the Extended Measurment procedure are valid." VAL 1 EXT_MEAS_RESET "GRR has stopped the Extended Measurement procedure" VAL 2 EXT_MEAS_LEAVE_IDLE "RR has entered a non-idle state and stopped the Extended Measurement procedure" VALTAB VAL_lac VAL DEF "lac" VAL 0xFFFE RRGRR_LA_INVALID "la invalid" VALTAB VAL_v_stop_ccch VAL 0 DONT_STOP_CCCH "Don't stop CCCH" VAL 1 STOP_CCCH "Stop CCCH" VAL 2 INVALID_MSG "The message was not assigned to MS" VAL 3 TASK_STOP_DUMMY_VALUE "Dummy value, only used for GRR internal purposes" VALTAB VAL_rxlev VAL 0x80 RRGRR_INVALID_RXLEV "receive signal strength level not present" VALTAB VAL_idx VAL 0xFF RRGRR_INVALID_IDX "index not present" VALTAB VAL_state VAL 0 TASK_STATE_PIM "Packet Idle Mode" VAL 1 TASK_STATE_PAM "Packet Access Mode" VAL 2 TASK_STATE_PTM "Packet Transfer Mode" VALTAB VAL_cell_bar_access_2 VAL 0 CBA_2_NORMAL "Status for cell reselection is set to normal" VAL 1 CBA_2_BARRED "Status for cell reselection is set to barred" VALTAB VAL_exc_acc VAL 0 EXC_ACC_NORMAL "Status for cell selection and reselection is set to normal" VAL 1 EXC_ACC_LIMITED "The MS is only allowed to camp on the cell for limited service" VALTAB VAL_same_ra_as_serving_cell VAL 0 DIFFERENT_RA_AS_SCELL "The cell is in a routing area different from the serving cell" VAL 1 SAME_RA_AS_SCELL "The cell is in the same routing area as the serving cell" VALTAB VAL_gprs_reselect_offset VAL 0 - 31 "Value range of parameter" VAL 0x10 GPRS_RESEL_OFF_DEFAULT "Default value (0 dB)" VAL 0xFF GPRS_RESEL_OFF_INVALID "This value is used to indicate the absence of this parameter" VALTAB VAL_gprs_rxlev_access_min VAL 0 - 63 "Value range of parameter" VAL 0xFF GPRS_RXLEV_ACCESS_MIN_INVALID "This value is used to indicate the absence of this parameter" VALTAB VAL_gprs_ms_txpwr_max_cch VAL 0 - 31 "Value range of parameter" VAL 0xFF GPRS_MS_TXPWR_MAX_CCH_INVALID "This value is used to indicate the absence of this parameter" VALTAB VAL_gprs_temporary_offset VAL 0 - 7 "Value range of parameter" VAL 0xFF GPRS_TEMPORARY_OFFSET_INVALID "This value is used to indicate the absence of this parameter" VALTAB VAL_gprs_penalty_time VAL 0 - 31 "Value range of parameter" VAL 0xFF GPRS_PENALTY_TIME_INVALID "This value is used to indicate the absence of this parameter" VALTAB VAL_priority_class VAL 0 - 7 "Value range of parameter" VAL 0xFF GPRS_PRIORITY_CLASS_INVALID "This value is used to indicate the absence of this parameter" VALTAB VAL_hcs_thr VAL 0 - 31 "Value range of parameter" VAL 0xFF GPRS_HCS_THR_INVALID "This value is used to indicate the absence of this parameter" VALTAB VAL_si13_location VAL 0 SI13_LOC_BCCH_NORM "SYSTEM INFORMATION TYPE 13 message is sent on BCCH norm" VAL 1 SI13_LOC_BCCH_EXT "SYSTEM INFORMATION TYPE 13 message is sent on BCCH ext" VAL 0xFF SI13_LOC_INVALID "This value is used to indicate the absence of this parameter" VALTAB VAL_pbcch_location VAL 0 - 3 "Value range of parameter" VAL 0xFF PBCCH_LOC_INVALID "This value is used to indicate the absence of this parameter" VALTAB VAL_psi1_repeat_period VAL 0 - 15 "Value range of parameter" VAL 0xFF PSI1_RPT_PRD_INVALID "This value is used to indicate the absence of this parameter" VALTAB VAL_nc_mode VAL 0 NC2_NOT_USED "allow cell reselection" VAL 1 NC2_USED "inhibit cell reselection" VAL 2 NC_MODE_RESET "NC is reset to default" VALTAB VAL_meas_cause VAL 0x0 NC_STOP_MEAS " Stop the meas report" VAL 0x1 NC_START_MEAS "Start Averaging of measurements" VAL 0x2 NC_REPORT_MEAS "get the meas report from RR" VALTAB VAL_sync_type VAL 0 SYNC_INITIAL "Sync request for new carrier" VAL 1 SYNC_RECONFIRM "Reconfirm 10 sec Timer Expired" VAR cause "Cause" B VAL @p_rrgrr - VAL_cause@ VAR bcch_arfcn "Frequency of BCCH" S VAR bcch_bsic "BSIC of BCCH" B VAR ac_class "Access class for RACH" S VAR pwr_offset "Power offset" B VAR limited "Limited service" B VAR l_buf "length of content in bit" S VAR o_buf "offset of content in bit" S VAR buf "buffer content" B VAR si_to_read "SI to read" B VAL @p_rrgrr - VAL_si_to_read@ VAR si1_state "SI1 states" B VAL @p_rrgrr - VAL_si1_state@ VAR si3_state "SI3 states" B VAL @p_rrgrr - VAL_si3_state@ VAR si13_state "SI13 states" B VAL @p_rrgrr - VAL_si13_state@ VAR pg_type "The type of paging" B VAL @p_rrgrr - VAL_pg_type@ VAR rr_est "Allowance of RR establishment" B VAL @p_rrgrr - VAL_rr_est@ VAR v_non_gprs "Valid flag for non GPRS" B VAR att "Attach/detach allowed" B VAR v_T3212 "Valid flag for T3212" B VAR T3212 "T3212 value" B VAR neci "Half rate support" B VAR pwrc "Power control indicator" B VAR dtx "DTX indicator" B VAR radio_link_timeout "Supervisory timer for RR connection" B VAR bs_ag_blks_res "Number of blocks reserved for access grant" B VAR ccch_conf "Physical channel configuration for CCCH" B VAR max_retrans "Maximum number of retransmissions" B VAR tx_integer "Number of slots to spread transmission" B VAR ec "Emergency call allowed" B VAR v_ext_ie "Valid flag for extension bits IE" B VAR ext_len "Extension length" B VAR spare_bit "Spare bit (val(ext_len)+1)" B VAR ch_needed "Channel needed field" B VAR v_emlpp "Valid flag" B VAR emlpp "Value of emlpp_prio" B VAR susp_req "Send GPRS suspension request flag" B VAL @p_rrgrr - VAL_susp_req@ VAR req_data "" B VAR ia_index "indicates valid parts of the Imm Ass Ext msg" B VAR fn "Frame Number" L VAR wait_ind "wait indication (T3122)" B VAR r_bit "retry bit" B VAL @p_rrgrr - VAL_r_bit@ VAR old_ptmsi "Packet Temporary Mobile Subsciber Identity" L VAL @p_rrgrr - VAL_old_ptmsi@ VAR new_ptmsi "Packet Temporary Mobile Subsciber Identity" L VAL @p_rrgrr - VAL_old_ptmsi@ VAR mac_req "MAC mode request" B VAR cs_req "Channel Coding Schemme Request" B VAR tlli "temporary logical link identifier" L VAR mo_mt "MO/MT FALG" B VAR prio "Priority" B VAR rlc_mode_req "RLC Mode" B VAR llc_type "LLC Frame Type" B VAR req_bwd "Requested Bandwidth" S VAR rlc_octets "RLC Octet Count" S VAR c_value "C_Value" B VAR rxqual "Rx Quality" B VAR sign_var "Signal Variance" B VAR stop_cause "Stop cause" B VAL @p_rrgrr - VAL_stop_cause@ VAR arfcn "channel number" S VAL @p_rrgrr - VAL_arfcn@ VAR sb_flag "synchronisation burst flag" B VAL @p_rrgrr - VAL_sb_flag@ VAR bsic "base station identification code" B VAL @p_rrgrr - VAL_bsic@ VAR cr_type "Cell re-selection mode" B VAL @p_rrgrr - VAL_cr_type@ VAR sync_res "Indicates the result of synchronisation" B VAL @p_rrgrr - VAL_sync_res@ VAR cell_type "Ncell or Scell" B VAL @p_rrgrr - VAL_cell_type@ VAR v_cr_par "Valid Flag for GPRS Cell Selection Parameter" B VAR pag_mode "Paging Mode" B VAL @p_rrgrr - VAL_pag_mode@ VAR split_pg "Split paging cycle (the value, NOT the code)" S VAL @p_rrgrr - VAL_split_pg@ VAR rac "routing are code" B VAL @p_rrgrr - VAL_rac@ VAR is_pbcch_present "Indicates whether PBCCH is present or not" B VAR reconn_state "Indicates that the reconnection was successful or not" B VAL @p_rrgrr - VAL_reconn_state@ VAR reconn_cause "Cause for the reconnection, refer to causes sent with ASSIGNMENT FAILURE [3]" B VAL @p_rrgrr - VAL_reconn_cause@ VAR ident_type "Identity type" B VAL @p_rrgrr - VAL_ident_type@ VAR tmsi "temporary logical link identifier" L VAR report_type "Extended Measurement reporting type" B VAL @p_rrgrr - VAL_report_type@ VAR ncc_permitted "network colour code permission indicator" B VAR call_ref "Call reference ID" B VAR xmeas_cause "indicates the state of the extended measurement results" B VAL @p_rrgrr - VAL_xmeas_cause@ VAR lac "location area code" S VAL @p_rrgrr - VAL_lac@ VAR v_plmn "Valid Flag" B VAR mcc "Mobile Country Code" B VAR mnc "Mobile Network Code" B VAR v_stop_ccch "Indicates whether CCCH shall be stopped" B VAL @p_rrgrr - VAL_v_stop_ccch@ VAR cid "cell identification" S VAR rxlev "receive signal strength level" B VAL @p_rrgrr - VAL_rxlev@ VAR idx "index" B VAL @p_rrgrr - VAL_idx@ VAR state "Indicates to RR the state of GRR" B VAL @p_rrgrr - VAL_state@ VAR v_pim_pbcch "pim" B VAR v_pam_pbcch "pam" B VAR v_ptm_pbcch "ptm" B VAR bs_pa_mfrms "Paging Channel configuration" B VAR cell_bar_access_2 "CELL_BAR_ACCESS_2" B VAL @p_rrgrr - VAL_cell_bar_access_2@ VAR exc_acc "EXC_ACC" B VAL @p_rrgrr - VAL_exc_acc@ VAR same_ra_as_serving_cell "SAME_RA_AS_SERVING_CELL" B VAL @p_rrgrr - VAL_same_ra_as_serving_cell@ VAR gprs_reselect_offset "GPRS_RESELECT_OFFSET" B VAL @p_rrgrr - VAL_gprs_reselect_offset@ VAR gprs_rxlev_access_min "GPRS_RXLEV_ACCESS_MIN" B VAL @p_rrgrr - VAL_gprs_rxlev_access_min@ VAR gprs_ms_txpwr_max_cch "GPRS_MS_TXPWR_MAX_CCH" B VAL @p_rrgrr - VAL_gprs_ms_txpwr_max_cch@ VAR gprs_temporary_offset "GPRS_TEMPORARY_OFFSET" B VAL @p_rrgrr - VAL_gprs_temporary_offset@ VAR gprs_penalty_time "GPRS_PENALTY_TIME" B VAL @p_rrgrr - VAL_gprs_penalty_time@ VAR priority_class "PRIORITY_CLASS" B VAL @p_rrgrr - VAL_priority_class@ VAR hcs_thr "HCS_THR" B VAL @p_rrgrr - VAL_hcs_thr@ VAR si13_location "SI13 Location" B VAL @p_rrgrr - VAL_si13_location@ VAR pbcch_location "PBCCH_LOCATION" B VAL @p_rrgrr - VAL_pbcch_location@ VAR psi1_repeat_period "PSI1_REPEAT_PERIOD" B VAL @p_rrgrr - VAL_psi1_repeat_period@ VAR nc_mode "NC mode" B VAL @p_rrgrr - VAL_nc_mode@ VAR meas_cause "Basic Element" B VAL @p_rrgrr - VAL_meas_cause@ VAR sync_type "Sync Info indicating the Reconfirm Sync timer status" B VAL @p_rrgrr - VAL_sync_type@ COMP sdu "service data unit" { l_buf ; length of content in bit o_buf ; offset of content in bit buf [1] ; buffer content } COMP si_states "States of the SI" { si1_state ; State of SI1 si3_state ; State of SI3 si13_state ; State of SI13 } COMP ext_ie "Possible future extension" { ext_len ; Extension length spare_bit [8] ; Spare bit (val(ext_len)+1) } COMP non_gprs "Non-GPRS parameters" { v_non_gprs ; Valid flag for non GPRS att ; Attach/detach allowed v_T3212 ; Valid flag for T3212 T3212 ; T3212 value neci ; Half rate support pwrc ; Power control indicator dtx ; DTX indicator radio_link_timeout ; Supervisory timer for RR connection bs_ag_blks_res ; Number of blocks reserved for access grant ccch_conf ; Physical channel configuration for CCCH bs_pa_mfrms ; 51 MFs between paging max_retrans ; Maximum number of retransmissions tx_integer ; Number of slots to spread transmission ec ; Emergency call allowed gprs_ms_txpwr_max_cch ; GPRS_MS_TXPWR_MAX_CCH v_ext_ie ; Valid flag for extension bits IE ext_ie ; Possible future extension } COMP emlpp_prio "eMLPP_PRIORITY" { v_emlpp ; Valid flag emlpp ; Value of emlpp_prio } COMP p_chan_req_des "Requested channel characteristics" { mo_mt ; MO/MT FALG prio ; Priority rlc_mode_req ; RLC Mode llc_type ; LLC Frame Type req_bwd ; Requested Bandwidth rlc_octets ; RLC Octet Count } COMP gprs_meas_results "GPRS Measurement Results" { c_value ; C_Value rxqual ; Rx Quality sign_var ; Signal Variance } COMP sync_result "Results of Synchronisation Attempts" { arfcn ; Channel Number sb_flag ; Error Cause bsic ; Base Station Identity Code } COMP rm_freq_list "frequencies to be removed" { arfcn ; Channel Number bsic ; BSIC } COMP meas_res "measurements ordered by the network" { arfcn ; ARFCN bsic ; BSIC rxlev ; RX Value } COMP arfcn_idx "Channel number and a associated index" { arfcn ; Radio Frequency Number idx ; Index to the ARFCN } COMP xmeas_res "results of the extended measurement" { arfcn_idx ; Radio Frequency Number and index rxlev ; field strength bsic ; Base Station Identification Code } COMP plmn "PLMN identification" { v_plmn ; Valid Flag mcc [SIZE_MCC] ; Mobile Country Code mnc [SIZE_MNC] ; Mobile Network Code } COMP rai "routing area identifier" { plmn ; PLMN lac ; Location Area Code rac ; Routing Area Code } UNION task "Task" { RR_TASK_1 v_stop_ccch ; Stop CCCH indicator LEAVE_PIM_PBCCH v_pim_pbcch ; Leave idle mode LEAVE_PAM_PBCCH v_pam_pbcch ; Leave access mode LEAVE_PTM_PBCCH v_ptm_pbcch ; Leave transfer mode } COMP rr_cell_env "current location of the mobile equipment" { plmn ; PLMN lac ; Location Area Code cid ; Cell Identification } COMP serving_cell_info "Cell information" { gprs_rxlev_access_min ; GPRS_RXLEV_ACCESS_MIN gprs_ms_txpwr_max_cch ; GPRS_MS_TXPWR_MAX_CCH bcch_arfcn ; Frequency of BCCH bcch_bsic ; BSIC of BCCH ac_class ; Access class for RACH pwr_offset ; Power offset rr_cell_env ; Cell Environment limited ; Limited service bs_pa_mfrms ; BS_PA_MFRMS arfcn [RRGRR_BA_LIST_SIZE] ; BA List } COMP cr_par "GPRS Cell Selection Parameter" { cell_bar_access_2 ; CELL_BAR_ACCESS_2 exc_acc ; EXC_ACC same_ra_as_serving_cell ; SAME_RA_AS_SERVING_CELL gprs_rxlev_access_min ; GPRS_RXLEV_ACCESS_MIN gprs_ms_txpwr_max_cch ; GPRS_MS_TXPWR_MAX_CCH gprs_temporary_offset ; GPRS_TEMPORARY_OFFSET gprs_penalty_time ; GPRS_PENALTY_TIME gprs_reselect_offset ; GPRS_RESELECT_OFFSET priority_class ; PRIORITY_CLASS hcs_thr ; HCS_THR si13_location ; SI13_LOCATION pbcch_location ; PBCCH_LOCATION psi1_repeat_period ; PSI1_REPEAT_PERIOD } COMP add_freq_list "BA list" { arfcn ; ARFCN bsic ; BSIC v_cr_par ; Valid Flag for GPRS Cell Selection Parameter cr_par ; GPRS Cell Selection Parameter } ; RRGRR_GPRS_SI13_IND 0x6D00 ; RRGRR_PACKET_PAGING_IND 0x6D02 ; RRGRR_CHANNEL_REQ 0x2D00 ; RRGRR_IA_IND 0x6D03 ; RRGRR_IAEXT_IND 0x6D04 ; RRGRR_ASSIGNMENT_REJ_IND 0x6D05 ; RRGRR_DATA_IND 0x6D06 ; RRGRR_DATA_REQ 0x2D02 ; RRGRR_IA_DOWNLINK_IND 0x6D08 ; RRGRR_START_MON_CCCH_REQ 0x2D03 ; RRGRR_STOP_MON_CCCH_REQ 0x2D04 ; RRGRR_CR_REQ 0x2D05 ; RRGRR_START_MON_BCCH_REQ 0x2D06 ; RRGRR_RR_EST_REQ 0x2D07 ; RRGRR_RR_EST_RSP 0x2D08 ; RRGRR_RR_EST_IND 0x6D0D ; RRGRR_ACTIVATE_REQ 0x2D0A ; RRGRR_GPRS_DATA_REQ 0x2D0C ; RRGRR_SUSPEND_DCCH_REQ 0x2D0D ; RRGRR_SUSPEND_DCCH_CNF 0x6D10 ; RRGRR_RECONNECT_DCCH_REQ 0x2D0E ; RRGRR_RECONNECT_DCCH_CNF 0x6D11 ; RRGRR_RESUMED_TBF_REQ 0x2D01 ; RRGRR_RESUMED_TBF_CNF 0x6D07 ; RRGRR_STOP_DCCH_IND 0x6D12 ; RRGRR_CR_IND 0x6D13 ; RRGRR_NCELL_SYNC_REQ 0x2D0F ; RRGRR_NCELL_SYNC_IND 0x6D15 ; RRGRR_SYNC_REQ 0x2D10 ; RRGRR_SYNC_IND 0x6D16 ; RRGRR_UPDATE_BA_REQ 0x2D12 ; RRGRR_MEAS_REP_REQ 0x2D13 ; RRGRR_MEAS_REP_CNF 0x6D17 ; RRGRR_TBF_ESTABLISHED_REQ 0x2D14 ; RRGRR_CR_RSP 0x2D15 ; RRGRR_MS_ID_IND 0x6D19 ; RRGRR_EXT_MEAS_REQ 0x2D16 ; RRGRR_EXT_MEAS_CNF 0x6D0A ; RRGRR_EXT_MEAS_STOP_REQ 0x2D17 ; RRGRR_STOP_TASK_REQ 0x2D18 ; RRGRR_STOP_TASK_CNF 0x6D09 ; RRGRR_START_TASK_REQ 0x2D19 ; RRGRR_START_TASK_CNF 0x6D1A ; RRGRR_STANDBY_STATE_IND 0x2D1A ; RRGRR_READY_STATE_IND 0x2D1B PRIM RRGRR_GPRS_SI13_IND 0x6D00 { cause ; Cause si_states ; State of SI serving_cell_info ; Cell information sdu ; Sdu to SI13 message } PRIM RRGRR_PACKET_PAGING_IND 0x6D02 { pg_type ; Paging type } PRIM RRGRR_CHANNEL_REQ 0x2D00 { req_data ; Channel Request Data } PRIM RRGRR_IA_IND 0x6D03 { fn ; Frame Number r_bit ; Retry Bit sdu ; Sdu to message } PRIM RRGRR_IAEXT_IND 0x6D04 { ia_index ; Index of IA fn ; Frame Number r_bit ; Retry Bit sdu ; Sdu to message } PRIM RRGRR_ASSIGNMENT_REJ_IND 0x6D05 { wait_ind ; wait indication r_bit ; Retry Bit } PRIM RRGRR_DATA_IND 0x6D06 { fn ; Frame Number sdu ; Sdu to message } PRIM RRGRR_DATA_REQ 0x2D02 { sdu ; Sdu to message } PRIM RRGRR_IA_DOWNLINK_IND 0x6D08 { fn ; Frame Number r_bit ; Retry Bit sdu ; Sdu to message } PRIM RRGRR_START_MON_CCCH_REQ 0x2D03 { pag_mode ; Paging Mode split_pg ; Split paging cycle } PRIM RRGRR_STOP_MON_CCCH_REQ 0x2D04 { is_pbcch_present ; PBCCH indicator } PRIM RRGRR_CR_REQ 0x2D05 { cr_type ; Cell re-selection mode arfcn ; channel number bsic ; bsic } PRIM RRGRR_START_MON_BCCH_REQ 0x2D06 { si_to_read ; SI to read } PRIM RRGRR_RR_EST_REQ 0x2D07 { non_gprs ; Non-GPRS parameters ch_needed ; Channel needed field ident_type ; Identity Type emlpp_prio ; eMLPP_PRIORITY susp_req ; GPRS Suspension request } PRIM RRGRR_RR_EST_RSP 0x2D08 { rr_est ; RR establishment allowence susp_req ; GPRS Suspension request } PRIM RRGRR_RR_EST_IND 0x6D0D { } PRIM RRGRR_ACTIVATE_REQ 0x2D0A { non_gprs ; Non-GPRS parameters susp_req ; GPRS Suspension request rac ; Routing area code } PRIM RRGRR_GPRS_DATA_REQ 0x2D0C { old_ptmsi ; Packet TMSI new_ptmsi ; Packet TMSI tlli ; TLLI p_chan_req_des ; Packet Channel Request Description gprs_meas_results ; GPRS Measurement Results mac_req ; MAC Mode Requested cs_req ; Channel Coding Scheme Requested rai ; Last valid routing area identifier } PRIM RRGRR_SUSPEND_DCCH_REQ 0x2D0D { } PRIM RRGRR_SUSPEND_DCCH_CNF 0x6D10 { } PRIM RRGRR_RECONNECT_DCCH_REQ 0x2D0E { reconn_cause ; why can't the procedure continue; ref to ASSIGNMENT FAILURE message } PRIM RRGRR_RECONNECT_DCCH_CNF 0x6D11 { reconn_state ; result of the reconnection procedure; may indicate Lower Layer Failure } PRIM RRGRR_RESUMED_TBF_REQ 0x2D01 { } PRIM RRGRR_RESUMED_TBF_CNF 0x6D07 { } PRIM RRGRR_STOP_DCCH_IND 0x6D12 { stop_cause ; Stop Cause } PRIM RRGRR_CR_IND 0x6D13 { cr_type ; Cell re-selection mode } PRIM RRGRR_NCELL_SYNC_REQ 0x2D0F { arfcn [RRGRR_MAX_ARFCN_NCELL_SYNC_REQ] ; List of Channel Numbers sync_type ; Primitive Item } PRIM RRGRR_NCELL_SYNC_IND 0x6D15 { sync_result [RRGRR_MAX_RSLT_NCELL_SYNC_IND] ; Results of Neighbour Cell Synchronisation } PRIM RRGRR_SYNC_REQ 0x2D10 { arfcn ; Frequency bsic ; Bsic } PRIM RRGRR_SYNC_IND 0x6D16 { sync_res ; Synchronisation Result } PRIM RRGRR_UPDATE_BA_REQ 0x2D12 { cell_type ; cell type nc_mode ; NC mode add_freq_list [RRGRR_BA_LIST_SIZE] ; ba list added rm_freq_list [RRGRR_BA_LIST_SIZE] ; ba list removed } PRIM RRGRR_MEAS_REP_REQ 0x2D13 { meas_cause ; measurement repot } PRIM RRGRR_MEAS_REP_CNF 0x6D17 { meas_res [RRGRR_MEAS_REP_LIST_SIZE] ; meas report } PRIM RRGRR_TBF_ESTABLISHED_REQ 0x2D14 { } PRIM RRGRR_CR_RSP 0x2D15 { } PRIM RRGRR_MS_ID_IND 0x6D19 { tmsi ; T M S I } PRIM RRGRR_EXT_MEAS_REQ 0x2D16 { arfcn_idx [1..RRGRR_MAX_ARFCN_EXT_MEAS] ; Frequency Channel Numbers call_ref ; Call reference ID report_type ; Reporting type ncc_permitted ; Permitted cells indication } PRIM RRGRR_EXT_MEAS_CNF 0x6D0A { xmeas_res [0..RRGRR_MAX_ARFCN_EXT_MEAS] ; Frequency Channel Numbers; array length = 0 if procedure was stopped call_ref ; Call reference ID xmeas_cause ; Result state } PRIM RRGRR_EXT_MEAS_STOP_REQ 0x2D17 { } PRIM RRGRR_STOP_TASK_REQ 0x2D18 { task ; Task } PRIM RRGRR_STOP_TASK_CNF 0x6D09 { } PRIM RRGRR_START_TASK_REQ 0x2D19 { state ; State } PRIM RRGRR_START_TASK_CNF 0x6D1A { } PRIM RRGRR_STANDBY_STATE_IND 0x2D1A { } PRIM RRGRR_READY_STATE_IND 0x2D1B { }