FreeCalypso > hg > fc-magnetite
view cdg3/cdginc-locosto/p_rrgrr.val @ 493:2e73bbc0648e
OSL: os_mem_fl.c compiles
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 24 Jun 2018 18:59:22 +0000 |
parents | c15047b3d00d |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_rrgrr.val | | SOURCE : "sap\rrgrr.pdf" | | LastModified : "2003-11-19" | | IdAndVersion : "8441.112.03.031" | | SrcFileTime : "Thu Nov 29 09:52:28 2007" | | Generated by CCDGEN_2.5.5A on Thu Sep 25 09:18:53 2014 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_RRGRR_VAL #define P_RRGRR_VAL #define CDG_ENTER__P_RRGRR_VAL #define CDG_ENTER__FILENAME _P_RRGRR_VAL #define CDG_ENTER__P_RRGRR_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_RRGRR_VAL__LAST_MODIFIED _2003_11_19 #define CDG_ENTER__P_RRGRR_VAL__ID_AND_VERSION _8441_112_03_031 #define CDG_ENTER__P_RRGRR_VAL__SRC_FILE_TIME _Thu_Nov_29_09_52_28_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_RRGRR_VAL #undef CDG_ENTER__FILENAME #include "p_mph.val" /* Access values independent from the corresponding h-file. */ /* * Value constants for VAL_cause */ #define GPRS_NOT_SUPPORTED (0x0) /* Serving cell does not support GPRS */ #define GPRS_SUPPORTED (0x1) /* Serving cell supports GPRS */ #define GPRS_CELL_NOT_SUITABLE (0x2) /* for GRR-controlled cell reselection */ /* * Value constants for VAL_si_to_read */ #define UNSPECIFIED_SI (0x0) /* Update of unspecified SI message or SI messages */ #define UPDATE_SI1 (0x1) /* Update of SI1 message */ #define UPDATE_SI2_SI2BIS_OR_SI2TER (0x2) /* Update of SI2, SI2 bis or SI2 ter message */ #define UPDATE_SI3_SI4_SI7_OR_SI8 (0x3) /* Update of SI3, SI4, SI7 or SI8 message */ #define UPDATE_SI9 (0x4) /* Update of SI9 message */ #define COMPLETE_SI (0x5) /* Read complete SI */ #define UPDATE_SI13 (0xff) /* Update or read of SI13 */ /* * Value constants for VAL_si1_state */ #define SI1_NOT_SEND (0x0) /* SI not send */ #define SI1_RECEIVED (0x1) /* SI received */ #define SI1_NOT_RECEIVED (0x2) /* SI not received */ /* * Value constants for VAL_si3_state */ #define SI3_NOT_SEND (0x0) /* SI not send */ #define SI3_RECEIVED (0x1) /* SI received */ #define SI3_NOT_RECEIVED (0x2) /* SI not received */ /* * Value constants for VAL_si13_state */ #define SI13_NOT_SEND (0x0) /* SI not send */ #define SI13_RECEIVED (0x1) /* SI received */ #define SI13_NOT_RECEIVED (0x2) /* SI not received */ /* * Value constants for VAL_pg_type */ #define RRGRR_IMSI (0x0) /* MS is paged by IMSI */ #define RRGRR_PTMSI (0x1) /* MS is paged by PTMSI (GPRS TMSI) */ /* * Value constants for VAL_rr_est */ #define RR_EST_NOT_ALLOWED (0x0) /* RR establishment not allowed */ #define RR_EST_ALLOWED (0x1) /* RR establishment allowed */ // VALTAB-FF: REL99 /* * Value constants for VAL_ecsc */ #define ECS_FORBIDDEN (0x0) /* Early classmark sending forbidden in the cell */ #define ECS_ALLOWED (0x1) /* Early classmark sending allowed in the cell */ /* * Value constants for VAL_susp_req */ #define SUSPENSION_REQ_NOT_NEEDED (0x0) /* RR need not send GPRS suspension request */ #define SUSPENSION_REQ_NEEDED (0x1) /* RR has to send GPRS suspension request */ /* * Value constants for VAL_r_bit */ #define CHAN_REQ_SENT_ONCE (0x0) /* MS has sent channel request only once */ #define CHAN_REQ_SENT_MORE (0x1) /* MS has sent channel request twice or more */ /* * Value constants for VAL_old_ptmsi */ #define RRGRR_PTMSI_INVALID (0xffffffff)/* P-TMSI or TMSI invalid (see GSM 3.03) */ /* * Value constants for VAL_stop_cause */ #define CONTENTION_RESOLUTION_FAIL (0x3) /* Establishment fails due to contention resolution */ #define DL_ESTABLISHMENT_FAIL (0x4) /* Layer 2 establishment failure */ /* * Value constants for VAL_arfcn */ #define RRGRR_INVALID_ARFCN (0xffff) /* Used to mark a channel number entry as invalid. */ /* * Value constants for VAL_sb_flag */ #define NO_SB_FOUND (0x0) /* synchronisation burst not found */ #define SB_FOUND (0x1) /* synchronisation burst found */ #define SB_UNKNOWN (0x2) /* status of synchronisation burst unknown */ /* * Value constants for VAL_bsic */ #define RRGRR_INVALID_BSIC (0xff) /* Used to identify a BSIC entry as invalid */ /* * Value constants for VAL_cr_type */ #define CR_NEW (0x0) /* RR has to reselect the given cell */ #define CR_COMPLETE (0x1) /* RR has to camp on this cell */ #define CR_CONT (0x2) /* Continue cell reselection. */ #define CR_CS (0x3) /* start cell selection process again */ #define CR_NEW_NOT_SYNCED (0x4) /* start cr for not syncd cell (ie. PCCO) */ #define CR_SUSPENDED_IDLE (0x7c) /* start idle procedures */ #define CR_REQ_CANDIDATE (0x7d) /* inform GRR that is has to start a CR */ #define CR_NORMAL (0x7e) /* Do not abort TBF */ #define CR_ABNORMAL (0x7f) /* Abort TBF */ /* * Value constants for VAL_sync_res */ #define SYNC_OK (0x0) /* Synchronisation OK */ #define SYNC_FAILED (0x1) /* Synchronisation failed */ /* * Value constants for VAL_cell_type */ #define SYNC_SCELL (0x0) /* Synchronisation to serving cell */ #define SYNC_NCELL (0x1) /* Synchronisation to neighbour cell */ /* * Value constants for VAL_pag_mode */ #define PAG_MODE_LAST_ONE (0x0) /* RR shall use the last page (before pag_Reorg) */ #define PAG_MODE_REORG (0x1) /* RR shall use Paging reorg mode */ #define PAG_MODE_PTM_NP (0x2) /* RR shall use the NORMAL paging in packet transfer mode, start only CCCH */ #define PAG_MODE_PIM_NP (0x3) /* RR shall start only CCCH with REORG and change to NORMAL paging */ #define PAG_MODE_DEFAULT (0xff) /* RR shall use the default paging mode and goes to idle mode */ /* * Value constants for VAL_split_pg */ #define RRGRR_NO_DRX (0x2c0) /* Non DRX mode */ /* * Value constants for VAL_rac */ #define RRGRR_RAC_INVALID (0xff) /* routing area code invalid */ /* * Value constants for VAL_reconn_state */ #define RECONN_OK (0x0) /* The reconnection to the 'old' channel was cuessful */ #define RECONN_LOW_FAIL (0x1) /* A Lower Layer Failure occured during the reconnection. */ /* * Value constants for VAL_reconn_cause */ #define RECONN_NORM_EVENT (0x0) /* Normal event */ #define RECONN_UNSPECIFIED (0x1) /* Abnormal release, unspecified */ #define RECONN_CHN_UNACCEPTABLE (0x2) /* Abnormal release, channel unacceptable */ #define RECONN_TIMER_EXPIRED (0x3) /* Abnormal release, timer expired */ #define RECONN_NO_ACTIVITY (0x4) /* Abnormal release, no activity on the radio path */ #define RECONN_PREEMPTIVE (0x5) /* Preemptive release */ #define RECONN_TA_OUT_OF_RANGE (0x8) /* Handover impossible, timing advance out of range */ #define RECONN_CHANNEL_MODE (0x9) /* Channel mode unacceptable */ #define RECONN_FREQ_NOT_IMPL (0xa) /* Frequency not implemented */ #define RECONN_CALL_CLEARED (0x41) /* Call already cleared */ #define RECONN_INCORRECT_SEMANTIC (0x5f) /* Semantically incorrect message */ #define RECONN_INVALID_INFO (0x60) /* Invalid mandatory information */ #define RECONN_UNKNWN_MSG_TYPE (0x61) /* Message type non-existent or not implemented */ #define RECONN_INCMPTBLE_MSG_TYPE (0x62) /* Message type not compatible with protocol state */ #define RECONN_COND_IE_ERROR (0x64) /* Conditional IE error */ #define RECONN_NO_CELL_ALLOC (0x65) /* No cell allocation available */ #define RECONN_PROT_UNSPECIFIED (0x6f) /* Protocol error unspecified */ /* * Value constants for VAL_ident_type */ #define ID_IMSI (0x1) /* Paged by IMSI */ #define ID_TMSI (0x4) /* Paged by TMSI */ #define ID_PTMSI (0x8) /* Paged by PTMSI */ /* * Value constants for VAL_report_type */ #define REP_TYPE_1 (0x0) /* synchronize to the 6 strongest carriers and provide their BSICs */ #define REP_TYPE_2 (0x1) /* synchronize to carriers in decreasing field strength until the BSICs for 6 carriers with allowed NCC are fully decoded */ #define REP_TYPE_3 (0x2) /* no synchronization, no BSICs are provided */ #define REP_TYPE_RES (0x3) /* reserved, ignore request for measurement data in this version */ /* * Value constants for VAL_xmeas_cause */ #define EXT_MEAS_OK (0x0) /* The results of the Extended Measurment procedure are valid. */ #define EXT_MEAS_RESET (0x1) /* GRR has stopped the Extended Measurement procedure */ #define EXT_MEAS_LEAVE_IDLE (0x2) /* RR has entered a non-idle state and stopped the Extended Measurement procedure */ /* * Value constants for VAL_lac */ #define VAL_LAC___DEF (0x0) /* lac */ #define RRGRR_LA_INVALID (0xfffe) /* la invalid */ /* * Value constants for VAL_v_stop_ccch */ #define DONT_STOP_CCCH (0x0) /* Don't stop CCCH */ #define STOP_CCCH (0x1) /* Stop CCCH */ #define INVALID_MSG (0x2) /* The message was not assigned to MS */ #define TASK_STOP_DUMMY_VALUE (0x3) /* Dummy value, only used for GRR internal purposes */ /* * Value constants for VAL_rxlev */ #define RRGRR_INVALID_RXLEV (0x80) /* receive signal strength level not present */ /* * Value constants for VAL_idx */ #define RRGRR_INVALID_IDX (0xff) /* index not present */ /* * Value constants for VAL_state */ #define TASK_STATE_PIM (0x0) /* Packet Idle Mode */ #define TASK_STATE_PAM (0x1) /* Packet Access Mode */ #define TASK_STATE_PTM (0x2) /* Packet Transfer Mode */ /* * Value constants for VAL_cell_bar_access_2 */ #define CBA_2_NORMAL (0x0) /* Status for cell reselection is set to normal */ #define CBA_2_BARRED (0x1) /* Status for cell reselection is set to barred */ /* * Value constants for VAL_exc_acc */ #define EXC_ACC_NORMAL (0x0) /* Status for cell selection and reselection is set to normal */ #define EXC_ACC_LIMITED (0x1) /* The MS is only allowed to camp on the cell for limited service */ /* * Value constants for VAL_same_ra_as_serving_cell */ #define DIFFERENT_RA_AS_SCELL (0x0) /* The cell is in a routing area different from the serving cell */ #define SAME_RA_AS_SCELL (0x1) /* The cell is in the same routing area as the serving cell */ /* * Value constants for VAL_gprs_reselect_offset */ #define GPRS_RESEL_OFF_DEFAULT (0x10) /* Default value (0 dB) */ #define GPRS_RESEL_OFF_INVALID (0xff) /* This value is used to indicate the absence of this parameter */ /* * Value constants for VAL_gprs_rxlev_access_min */ #define GPRS_RXLEV_ACCESS_MIN_INVALID (0xff) /* This value is used to indicate the absence of this parameter */ /* * Value constants for VAL_gprs_ms_txpwr_max_cch */ #define GPRS_MS_TXPWR_MAX_CCH_INVALID (0xff) /* This value is used to indicate the absence of this parameter */ /* * Value constants for VAL_gprs_temporary_offset */ #define GPRS_TEMPORARY_OFFSET_INVALID (0xff) /* This value is used to indicate the absence of this parameter */ /* * Value constants for VAL_gprs_penalty_time */ #define GPRS_PENALTY_TIME_INVALID (0xff) /* This value is used to indicate the absence of this parameter */ /* * Value constants for VAL_priority_class */ #define GPRS_PRIORITY_CLASS_INVALID (0xff) /* This value is used to indicate the absence of this parameter */ /* * Value constants for VAL_hcs_thr */ #define GPRS_HCS_THR_INVALID (0xff) /* This value is used to indicate the absence of this parameter */ /* * Value constants for VAL_si13_location */ #define SI13_LOC_BCCH_NORM (0x0) /* SYSTEM INFORMATION TYPE 13 message is sent on BCCH norm */ #define SI13_LOC_BCCH_EXT (0x1) /* SYSTEM INFORMATION TYPE 13 message is sent on BCCH ext */ #define SI13_LOC_INVALID (0xff) /* This value is used to indicate the absence of this parameter */ /* * Value constants for VAL_pbcch_location */ #define PBCCH_LOC_INVALID (0xff) /* This value is used to indicate the absence of this parameter */ /* * Value constants for VAL_psi1_repeat_period */ #define PSI1_RPT_PRD_INVALID (0xff) /* This value is used to indicate the absence of this parameter */ /* * Value constants for VAL_nc_mode */ #define NC2_NOT_USED (0x0) /* allow cell reselection */ #define NC2_USED (0x1) /* inhibit cell reselection */ #define NC_MODE_RESET (0x2) /* NC is reset to default */ /* * Value constants for VAL_meas_cause */ #define NC_STOP_MEAS (0x0) /* Stop the meas report */ #define NC_START_MEAS (0x1) /* Start Averaging of measurements */ #define NC_REPORT_MEAS (0x2) /* get the meas report from RR */ /* * Value constants for VAL_sync_type */ #define SYNC_INITIAL (0x0) /* Sync request for new carrier */ #define SYNC_RECONFIRM (0x1) /* Reconfirm 10 sec Timer Expired */ /* * Value constants for VAL_rep_rate */ #define NORMAL_REP_RATE (0x0) /* Normal(SACCH)reporting rate */ #define REDUCED_REP_RATE (0x1) /* Reduced reporting rate */ /* * Value constants for Val_inv_bsic */ #define INV_BSIC_REPORTING_DISABLED (0x0) /* Invalid BSIC reporting not enabled */ #define INV_BSIC_REPORTING_ENABLED (0x1) /* Invalid BSIC reporting not enabled */ /* * Value constants for Val_scale_ord */ #define SCALE_0dB (0x0) /* Scaling by 0dB */ #define SCALE_10dB (0x1) /* Scaling by 10dB */ #define SCALE_AUTO (0x2) /* Automatic scaling */ // VALTAB-FF: REL99 AND TI_PS_FF_EMR /* * Value constants for Val_nco */ // VAL-FF: REL99 AND TI_PS_FF_EMR #define NCO_NC0 (0x0) /* Values Item */ // VAL-FF: REL99 AND TI_PS_FF_EMR #define NCO_NC1 (0x1) /* Values Item */ // VAL-FF: REL99 AND TI_PS_FF_EMR #define NCO_NC2 (0x2) /* Values Item */ // VAL-FF: REL99 AND TI_PS_FF_EMR #define NCO_RESET (0x3) /* Values Item */ // VAL-FF: REL99 AND TI_PS_FF_EMR #define NCO_EMPTY (0x4) /* Values Item */ /* * enum to UnionController task * CCDGEN:WriteEnum_Count==455 */ #ifndef __T_ctrl_task__ #define __T_ctrl_task__ typedef enum { RR_TASK_1 = 0x0, LEAVE_PIM_PBCCH = 0x1, LEAVE_PAM_PBCCH = 0x2, LEAVE_PTM_PBCCH = 0x3 }T_ctrl_task; #endif /* * user defined constants */ #define RRGRR_MAX_ARFCN_NCELL_SYNC_REQ (0xc) #define RRGRR_MAX_ARFCN_EXT_MEAS (0x40) // CONST-FF: !REL99 OR !TI_PS_FF_EMR // #define RRGRR_MEAS_REP_LIST_SIZE (0x7) #define RRGRR_BA_LIST_SIZE (0x20) #define SIZE_MCC (0x3) #define SIZE_MNC (0x3) // CONST-FF: REL99 AND TI_PS_FF_EMR #define RRGRR_MAX_RSLT_NCELL_SYNC_IND (0xc) // CONST-FF: !REL99 OR !TI_PS_FF_EMR // #define RRGRR_MAX_RSLT_NCELL_SYNC_IND (0x6) // CONST-FF: REL99 AND TI_PS_FF_EMR #define RRGRR_MEAS_REP_LIST_SIZE (0x21) #define MAX_NUM_OF_RTD_VALUES (0x3) #include "CDG_LEAVE.h" #endif