FreeCalypso > hg > fc-magnetite
view cdg-hybrid/cdginc/m_tst.val @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 02 Jan 2020 05:38:26 +0000 |
parents | e7a67accfad9 |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : m_tst.val | | SOURCE : "msg\tst.mdf" | | LastModified : "2000-10-23" | | IdAndVersion : "8441.603.99.005" | | SrcFileTime : "Wed Nov 28 10:21:30 2007" | | Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef M_TST_VAL #define M_TST_VAL #define CDG_ENTER__M_TST_VAL #define CDG_ENTER__FILENAME _M_TST_VAL #define CDG_ENTER__M_TST_VAL__FILE_TYPE CDGINC #define CDG_ENTER__M_TST_VAL__LAST_MODIFIED _2000_10_23 #define CDG_ENTER__M_TST_VAL__ID_AND_VERSION _8441_603_99_005 #define CDG_ENTER__M_TST_VAL__SRC_FILE_TIME _Wed_Nov_28_10_21_30_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__M_TST_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_no_of_pdus */ #define VAL_NO_OF_PDUS___DEF (0x0) /* Number of PDUs to transmit */ #define TEST_INFINITIVE_NO (0x0) /* ciphering not used */ /* * Value constants for VAL_dl_timeslot_offset */ #define TEST_TN0 (0x0) /* downlink timeslot offsett 0 */ #define TEST_TN1 (0x1) /* downlink timeslot offsett 1 */ #define TEST_TN2 (0x2) /* downlink timeslot offsett 2 */ #define TEST_TN3 (0x3) /* downlink timeslot offsett 3 */ #define TEST_TN4 (0x4) /* downlink timeslot offsett 4 */ #define TEST_TN5 (0x5) /* downlink timeslot offsett 5 */ #define TEST_TN6 (0x6) /* downlink timeslot offsett 6 */ #define TEST_TN7 (0x7) /* downlink timeslot offsett 7 */ /* * Value constants for VAL_mode_flag_val */ #define TEST_RANDOM (0x0) /* pseudorandom data */ #define TEST_LOOP (0x1) /* loop back */ /* * user defined constants */ #define L3MAX (0xfb) #define MAX_N_PDU_NUMBER_LIST (0xb) #include "CDG_LEAVE.h" #endif