FreeCalypso > hg > fc-magnetite
view cdg-hybrid/cdginc/p_aci.val @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 02 Jan 2020 05:38:26 +0000 |
| parents | e7a67accfad9 |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_aci.val | | SOURCE : "sap\aci.pdf" | | LastModified : "2004-06-01" | | IdAndVersion : "8411.105.00.205" | | SrcFileTime : "Thu Nov 29 09:29:50 2007" | | Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_ACI_VAL #define P_ACI_VAL #define CDG_ENTER__P_ACI_VAL #define CDG_ENTER__FILENAME _P_ACI_VAL #define CDG_ENTER__P_ACI_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_ACI_VAL__LAST_MODIFIED _2004_06_01 #define CDG_ENTER__P_ACI_VAL__ID_AND_VERSION _8411_105_00_205 #define CDG_ENTER__P_ACI_VAL__SRC_FILE_TIME _Thu_Nov_29_09_29_50_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_ACI_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_cmd_src */ #define CMD_SRC_INT (0x0) /* Command from internal application */ #define CMD_SRC_EXT (0x1) /* Command from external application */ #define CMD_SRC_UNKNOWN (0xff) /* Reserved */ /* * Value constants for VAL_urt_stat */ #define URT_RDY_TO_SEND (0x0) /* URT is ready to accept new data */ #define URT_DATA_AVAIL (0x1) /* URT has data available */ #define URT_STAT_UNKNOWN (0xff) /* Reserved */ /* * Value constants for VAL_cause */ #define ABT_ABORT_DATA (0x0) /* Abort data mode */ #define ABT_ABORT_CMD (0x1) /* Abort current command */ /* * Value constants for VAL_ackflg */ #define ACI_NAK (0x0) /* Not Acknowledge */ #define ACI_ACK (0x1) /* Acknowledge */ /* * user defined constants */ #define MAX_CMD_LEN (0x17c) #define MAX_TRC_LEN (0x50) #define MAX_DATA_LEN (0xc8) #include "CDG_LEAVE.h" #endif