FreeCalypso > hg > fc-magnetite
view cdg-hybrid/msg/rr_com.mdf @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 02 Jan 2020 05:38:26 +0000 |
parents | e7a67accfad9 |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : rr_com.mdf ;*** Creation : Thu Jun 19 15:32:11 CST 2008 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Air Interface Message Specification ;*** Document Name : rr_com ;*** Document No. : 8010.606.02.008 ;*** Document Date : 2004-01-16 ;*** Document Status: APPROVED ;*** Document Author: x0abuali ;******************************************************************************** PRAGMA SRC_FILE_TIME "Wed Nov 28 10:20:42 2007" PRAGMA LAST_MODIFIED "2004-01-16" PRAGMA ID_AND_VERSION "8010.606.02.008" PRAGMA CCDNAME RR_COM ; CCD name tag PRAGMA ALLWAYS_ENUM_IN_VAL_FILE NO ; Adds enumerations in the .val file. CONST MAX_ADD_RA_CAP 4 ; number of RA caps is MAX_ADD_RA_CAP+1 CONST MAX_NUM_ACC_TYPE 16 ; Maximum number of access technologies that can be requested by NW in Packet Uplink assignment message CONST MAX_BSIC 18 ; Maximum number of bsic_struct in Measurement Information message ((23*8-28-14)/7 = 20) and in SI 2quater Rest Octets IE ((20*8-22-14)/7 = 17) CONST MAX_NNC 96 ; Maximum number of cells in Neighbour cell list for Enhanced Measurements CONST MAXRTDS6 20 ; Maximum number of 6 Bit Real Time Difference structures in Measurement Information message and in SI 2quater Rest Octets IE (assuming 1 value per structure) CONST MAXRTDS12 10 ; Maximum number of 12 Bit Real Time Difference structures in Measurement Information message and in SI 2quater Rest Octets IE (assuming 1 value per structure) CONST MAXRTD6 8 ; Maximum number of 6 Bit Real Time Difference values per 6 Bit RTD structure (assumed value, theoretical maximum: 21) CONST MAXRTD12 6 ; Maximum number of 12 Bit Real Time Difference values per 12 Bit RTD structure (assumed value, theoretical maximum: 11) CONST BIT7_MAX 128 ; 7 bit max CONST MAX_TDD_CELLS 21 ; Maximum number of TDD cell info in 3G neighbour cell info CONST MAX_FDD_CELLS 17 ; Maximum number of FDD cell info in 3G neighbour cell info CONST MAX_FDD 131 ; (L3MAX_ACK-3-1-1)*8/(14+1) = 131,2 CONST MAX_TDD 131 ; (L3MAX_ACK-3-1-1)*8/(14+1) = 131,2 CONST MAX_CDMA2K_NEIGH_CELLS 64 ; maximum value 3 uarfcn times 32 cells VALTAB VAL_ab_type %REL99% VAL 0 AB_8_BIT "8 bit access burst shall be used" VAL 1 AB_11_BIT "11 bit access burst shall be used" VALTAB VAL_acc_tech_typ VAL DEF "unknown" VAL 0 ACC_GSM_P "GSM P" VAL 1 ACC_GSM_E "GSM E -note that GSM E covers GSM P" VAL 2 ACC_GSM_R "GSM R - note that GSM R covers GSM E and GSM P" VAL 3 ACC_GSM_1800 "GSM 1800 (DCS)" VAL 4 ACC_GSM_1900 "GSM 1900 (PCS)" VAL 5 ACC_GSM_450 "GSM 450" VAL 6 ACC_GSM_480 "GSM 480" VAL 7 ACC_GSM_850 "GSM 850" VAL 15 ACC_CAP_SAME_AS_PRECED %REL99% "When access capabilities of a band is same as it's previously included band." VAL 14 ACC_INVALID %REL99% "no valid access technology type present (this value isn?t defined in the specification)" VAL 15 ACC_INVALID %!REL99% "no valid access technology type present (this value isn?t defined in the specification)" VALTAB VAL_pow_class VAL 1 POWER_CLASS_1 "Power Class 1" VAL 2 POWER_CLASS_2 "Power Class 2" VAL 3 POWER_CLASS_3 "Power Class 3" VAL 4 POWER_CLASS_4 "Power Class 4" VAL 5 POWER_CLASS_5 "Power Class 5" VAL 6 "Reserved" VAL 7 "Reserved" VAL POWER_CLASS_2 MIN_CLASS_GSM "minimal GSM power class" VAL POWER_CLASS_5 MAX_CLASS_GSM "maximal GSM power class" VAL POWER_CLASS_1 MIN_CLASS_DCS "minimal DCS power class" VAL POWER_CLASS_3 MAX_CLASS_DCS "maximal DCS power class" VAL POWER_CLASS_1 MIN_CLASS_PCS "minimal PCS power class" VAL POWER_CLASS_3 MAX_CLASS_PCS "maximal PCS power class" VAL POWER_CLASS_5 CLASS_MIN_POW_GSM "GSM power class with the lowest output power" VAL POWER_CLASS_2 CLASS_MIN_POW_DCS "DCS power class with the lowest output power" VAL POWER_CLASS_2 CLASS_MIN_POW_PCS "PCS power class with the lowest output power" VAL 0 IDX_PWRCLASS_900 "Index for use with rf_cap.rf_power.pow_class4[] array" VAL 1 IDX_PWRCLASS_1800 "Index for use with rf_cap.rf_power.pow_class4[] array" VAL 2 IDX_PWRCLASS_1900 "Index for use with rf_cap.rf_power.pow_class4[] array" VAL 3 IDX_PWRCLASS_850 "Index for use with rf_cap.rf_power.pow_class4[] array" VAL 4 IDX_PWRCLASS_400 "Index for use with rf_cap.rf_power.pow_class4[] array" VAL 5 IDX_PWRCLASS_700 %REL99% "Index for use with rf_cap.rf_power.pow_class4[] array" VALTAB VAL_bool VAL 0 NO "value is not set" VAL 1 YES "value is set" VAL 0 NOT_SUPPORTED "feature not supported" VAL 1 SUPPORTED "feature supported" VALTAB VAL_flag VAL 0 GRR_NO "not present" VAL 1 GRR_YES "present" VALTAB VAL_bss_paging_coord %REL99% VAL 0 CS_PG_NOT_SUPPORTED "The cell does not support Circuit-Switched paging co-ordination" VAL 1 CS_PG_SUPPORTED "The cell supports Circuit-Switched paging co-ordination" VALTAB VAL_ctrl_ack_type VAL 0 "default format is four access bursts" VAL 1 "default format is RLC/MAC control block." VALTAB VAL_dtm_g_ms_class VAL 0 SUB_CLASS_1 "Sub-Class 1 supported" VAL 1 SUB_CLASS_5 "Sub-Class 5 supported" VAL 2 SUP_CLASS_9 "Sub-Class 9 supported" VAL 3 "Reserved" VALTAB VAL_dtm_g_high_ms_class %TI_PS_FF_REL99_AND_ABOVE% VAL 0 "Reserved" VAL 1 SUB_CLASS_31_OR_36 "Multislot class 31 or 36 supported" VAL 2 SUB_CLASS_32_OR_37 "Multislot class 32 or 37 supported" VAL 3 SUB_CLASS_33_OR_38 "Multislot class 33 or 38 supported" VAL 4 SUB_CLASS_41 "Multislot class 41 supported" VAL 5 SUB_CLASS_42 "Multislot class 42 supported" VAL 6 SUB_CLASS_43 "Multislot class 43 supported" VAL 7 SUB_CLASS_44 "Multislot class 44 supported" VALTAB VAL_dtm_support %REL99% VAL 0 DTM_NOT_SUPPORTED "The cell does not support DTM procedures." VAL 1 DTM_SUPPORTED "The cell supports DTM procedures." VALTAB VAL_egprs_packet_channel_request %REL99% VAL 0 EGPRS_PACKET_CHANNEL_REQUEST_MSG_SENT "" VAL 1 PACKET_CHANNEL_REQUEST_MSG_SENT "" VALTAB VAL_bands VAL 0x00 BAND_AUTO "0b00000000: All bands shall be scanned" VAL 0x01 BAND_GSM_900 "0b00000001: GSM 900 is supported, shall be scanned" VAL 0x02 BAND_DCS_1800 "0b00000010: DCS 1800 is supported, shall be scanned" VAL 0x04 BAND_PCS_1900 "0b00000100: PCS 1900 is supported, shall be scanned" VAL 0x08 BAND_E_GSM "0b00001000: Extended GSM is supported, shall be scanned" VAL 0x10 BAND_GSM_850 "0b00010000: GSM 850 is supported, shall be scanned" VAL 0x20 BAND_GSM_450 "0b00100000: GSM 450 is supported, shall be scanned" VAL 0x40 BAND_GSM_480 "0b01000000: GSM 480 is supported, shall be scanned" VAL 0x80 BAND_R_GSM "0b10000000: R-GSM is supported, shall be scanned" VAL 0x03 BAND_DUAL "0b00000011: GSM 900 and DCS 1800 is supported, shall be scanned" VAL 0x0B BAND_DUAL_EXT "0b00001011: GSM 900, E-GSM and DCS 1800 is supported, shall be scanned" VAL 0x14 BAND_DUAL_US "0b00010100: GSM 850 and PCS 1900 is supported, shall be scanned" VALTAB VAL_egsm VAL 0 EGSM_NOT_SUPPORTED "The mobile station does not support the extension band." VAL 1 EGSM_SUPPORTED "The mobile station does support the extension band (E-GSM or R-GSM)." VALTAB VAL_freq_scroll %REL99% VAL 0 SCROL_NO "Frequency scrolling is not used" VAL 1 SCROL_YES "Frequency scrolling is used" VALTAB VAL_gsm400_supp VAL 0 "reserved (if neither GSM 480 nor GSM 450 is supported the whole gsm400_struct is omitted)" VAL 1 GSM480 "GSM 480 supported but GSM 450 not supported" VAL 2 GSM450 "GSM 450 supported but GSM 480 not supported" VAL 3 GSM450_480 "GSM 450 supported and GSM 480 supported" VALTAB VAL_pow_8psk_cap VAL 0 "Reserved" VAL 1 POWER_CLASS_E1 "" VAL 2 POWER_CLASS_E2 "" VAL 3 POWER_CLASS_E3 "" VALTAB VAL_mod_cap VAL 0 DL_ONLY_8PSK "8-PSK supported for downlink reception only" VAL 1 FULL_8PSK "8-PSK supported for uplink transmission and downlink reception" VALTAB VAL_mb_value VAL DEF "Reserved" VAL 0 MB_NO_EUROPEAN_BAND "0b000: neither GSM 900, E-GSM or DCS 1800 supported" VAL 1 MB_GSM900 "0b001: GSM 900 is supported" VAL 2 MB_EGSM "0b010: E-GSM is supported" VAL 4 MB_DCS1800 "0b100: DCS 1800 is supported" VAL 5 MB_DUAL "0b101: GSM 900 and DCS 1800 is supported" VAL 6 MB_DUAL_EXT "0b110: E-GSM and DCS 1800 is supported" VALTAB VAL_ms_class VAL 1 MSLOT_CLASS_1 "Multi Slot Class 1" VAL 2 MSLOT_CLASS_2 "Multi Slot Class 2" VAL 3 MSLOT_CLASS_3 "Multi Slot Class 3" VAL 4 MSLOT_CLASS_4 "Multi Slot Class 4" VAL 5 MSLOT_CLASS_5 "Multi Slot Class 5" VAL 6 MSLOT_CLASS_6 "Multi Slot Class 6" VAL 7 MSLOT_CLASS_7 "Multi Slot Class 7" VAL 8 MSLOT_CLASS_8 "Multi Slot Class 8" VAL 9 MSLOT_CLASS_9 "Multi Slot Class 9" VAL 10 MSLOT_CLASS_10 "Multi Slot Class 10" VAL 11 MSLOT_CLASS_11 "Multi Slot Class 11" VAL 12 MSLOT_CLASS_12 "Multi Slot Class 12" VAL 13 MSLOT_CLASS_13 "Multi Slot Class 13" VAL 14 MSLOT_CLASS_14 "Multi Slot Class 14" VAL 15 MSLOT_CLASS_15 "Multi Slot Class 15" VAL 16 MSLOT_CLASS_16 "Multi Slot Class 16" VAL 17 MSLOT_CLASS_17 "Multi Slot Class 17" VAL 18 MSLOT_CLASS_18 "Multi Slot Class 18" VAL 19 MSLOT_CLASS_19 "Multi Slot Class 19" VAL 20 MSLOT_CLASS_20 "Multi Slot Class 20 (not for HSCSD)" VAL 21 MSLOT_CLASS_21 "Multi Slot Class 21 (not for HSCSD)" VAL 22 MSLOT_CLASS_22 "Multi Slot Class 22 (not for HSCSD)" VAL 23 MSLOT_CLASS_23 "Multi Slot Class 23 (not for HSCSD)" VAL 24 MSLOT_CLASS_24 "Multi Slot Class 24 (not for HSCSD)" VAL 25 MSLOT_CLASS_25 "Multi Slot Class 25 (not for HSCSD)" VAL 26 MSLOT_CLASS_26 "Multi Slot Class 26 (not for HSCSD)" VAL 27 MSLOT_CLASS_27 "Multi Slot Class 27 (not for HSCSD)" VAL 28 MSLOT_CLASS_28 "Multi Slot Class 28 (not for HSCSD)" VAL 29 MSLOT_CLASS_29 "Multi Slot Class 29 (not for HSCSD)" VALTAB VAL_nmo VAL 0b00 "Network Mode 1" VAL 0b01 "Network Mode 2" VAL 0b10 "Network Mode 3" VAL 0b11 "reserved" VALTAB VAL_pfc_feature_mode %REL99% VAL 0 PFC_NOT_SUPPORTED "The network does not support packet flow context procedures." VAL 1 PFC_SUPPORTED "The network supports packet flow context procedures." VALTAB VAL_rep_priority %REL99% VAL 0 NORMAL_PRIO "Normal reporting priority" VAL 1 HIGH_PRIO "High reporting priority" VALTAB VAL_rf_pow_cap VAL 0 RF_CLASS_1 "class 1 for GSM 850, 900P+E, DCS 1800 and PCS 1900" VAL 1 RF_CLASS_2 "class 2 for GSM 850, 900P+E, DCS 1800 and PCS 1900" VAL 2 RF_CLASS_3 "class 3 for GSM 850, 900P+E, DCS 1800 and PCS 1900" VAL 3 RF_CLASS_4 "class 4 for GSM 850, 900P+E (reserved for DCS 1800 and PCS 1900)" VAL 4 RF_CLASS_5 "class 5 for GSM 850, 900P+E (reserved for DCS 1800 and PCS 1900)" VAL 5 "reserved" VAL 6 "reserved" VAL 7 RF_CLASS_IRRELEVANT "irrelevant for this IE (multiband GSM MS)" VALTAB VAL_rev_lev VAL DEF "Reserved by future use" VAL 0 REV_LEV_PHASE_1 "Reserved for GSM phase 1" VAL 1 REV_LEV_PHASE_2 "Used by GSM phase 2 mobile stations" VAL 2 REV_LEV_R99_SUPPORT "Used by mobile stations supporting R99 or later versions" VALTAB VAL_rev99 %REL99% VAL 0 PHASE_1 "Release ?98 or older" VAL 1 RELEASE99 "Release ?99 onwards" VALTAB VAL_single_band VAL DEF "Reserved" VAL 0 SINGLE_EGSM "Extended GSM is supported" VAL 1 SINGLE_GSM900 "GSM 900 is supported" VAL 2 SINGLE_DCS1800 "DCS 1800 is supported" VAL 3 SINGLE_GSM450 "GSM 450 is supported" VAL 4 SINGLE_GSM480 "GSM 480 is supported" VAL 5 SINGLE_GSM850 "GSM 850 is supported" VAL 6 SINGLE_PCS1900 "PCS 1900 is supported" VALTAB VAL_sms_val VAL 0 SM_1 "1/4 timeslot (~144 micro sec)" VAL 1 SM_2 "2/4 timeslot (~288 micro sec)" VAL 2 SM_3 "3/4 timeslot (~433 micro sec)" VAL 3 SM_4 "4/4 timeslot" VAL 4 SM_5 "5/4 timeslot" VAL 5 SM_6 "6/4 timeslot" VAL 6 SM_7 "7/4 timeslot" VAL 7 SM_8 "8/4 timeslot" VAL 8 SM_9 "9/4 timeslot" VAL 9 SM_10 "10/4 timeslot" VAL 10 SM_11 "11/4 timeslot" VAL 11 SM_12 "12/4 timeslot" VAL 12 SM_13 "13/4 timeslot" VAL 13 SM_14 "14/4 timeslot" VAL 14 SM_15 "15/4 timeslot" VAL 15 SM_16 "16/4 timeslot (~2307 micro sec)" VALTAB VAL_ss_screen VAL DEF "for future use (The network shall interpret these values the same as ?1?)" VAL 0 SS_SCREEN_DEFAULT "default value of phase 1" VAL 1 SS_SCREEN_PHASE_2 "capability of handling of ellipsis notation and phase 2 error handling" VALTAB VAL_ucs2_treat VAL 0 DEFAULT_PREF "the ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2." VAL 1 NO_PREF "the ME has no preference between the use of the default alphabet and the use of UCS2." VALTAB VAL_rep_offset_900 %REL99% VAL 0 ZERO_DB "Apply an offset of 0 dB to the reported value" VAL 1 SIX_DB "Apply an offset of 6 dB to the reported value" VAL 2 TWELVE_DB "Apply an offset of 12 dB to the reported value" VAL 3 EIGHTEEN_DB "Apply an offset of 18 dB to the reported value" VAL 4 TWENTYFOUR_DB "Apply an offset of 24 dB to the reported value" VAL 5 THIRTY_DB "Apply an offset of 30 dB to the reported value" VAL 6 THIRTYSIX_DB "Apply an offset of 36 dB to the reported value" VAL 7 FORTYTWO_DB "Apply an offset of 42 dB to the reported value" VALTAB VAL_th_rep_900 %REL99% VAL 0 ZERO "Apply priority reporting if the reported value is above 0 dB" VAL 1 SIX "Apply priority reporting if the reported value is above 6 dB" VAL 2 TWELVE "Apply priority reporting if the reported value is above 12 dB" VAL 3 EIGHTEEN "Apply priority reporting if the reported value is above 18 dB" VAL 4 TWENTYFOUR "Apply priority reporting if the reported value is above 24 dB" VAL 5 THIRTY "Apply priority reporting if the reported value is above 30 dB" VAL 6 THIRTYSIX "Apply priority reporting if the reported value is above 36 dB" VAL 7 INDEFINITELY "Never apply priority reporting" VALTAB VAL_ccn_active %REL99% VAL 0 "The Cell has not enabled CCN procedure.(but if received on PMO/ PCCO then follow the one received on broadcast)" VAL 1 "The Cell has enabled CCN procedure." VALTAB VAL_nw_ext_ul_tbf %REL99% VAL 0 EXT_UL_TBF_NOT_SUPPORTED "The network does not support Extended UL TBF procedures." VAL 1 EXT_UL_TBF_SUPPORTED "The network does support Extended UL TBF procedures." VALTAB VAL_ccn_supported %REL99% VAL 0 CCN_SUPPORTED "CCN is enabled towards the corresponding cell" VAL 1 CCN_NOT_SUPPORTED "CCN is disabled towards the corresponding cell" VALTAB VAL_ms_pwr_profile %TI_PS_FF_REL99_AND_ABOVE% VAL 0 MS_PWR_PROF0 "MULTISLOT_POWER_PROFILE 0" VAL 1 MS_PWR_PROF1 "MULTISLOT_POWER_PROFILE 1" VAL 2 MS_PWR_PROF2 "MULTISLOT_POWER_PROFILE 2" VAL 3 MS_PWR_PROF3 "MULTISLOT_POWER_PROFILE 3" VALTAB VAL_rep_acch_cap %TI_PS_FF_REL99_AND_ABOVE% VAL 0 REP_DL_FACCH "MS supports Repeated Downlink FACCH" VAL 1 REP_SACCH_DL_FACCH "MS supports Repeated SACCH and Repeated Downlink FACCH" VALTAB VAL_dl_adv_rx_per %TI_PS_FF_REL99_AND_ABOVE% VAL 0 DL_ADVANC_RX_PERF_NOT_SUPPORT "Downlink Advanced Receiver Performance not supported" VAL 1 DL_ADVANC_RX_PERF_PHASE1_SUPPORT "Downlink Advanced Receiver Performance – phase I supported" VAL 2 DL_ADVANC_RX_PERF_RESERVE_VALUE1 "If value is received by the network, they shall be interpreted as ‘01’." VAL 3 DL_ADVANC_RX_PERF_RESERVE_VALUE2 "If value is received by the network, they shall be interpreted as ‘01’." VAR ab_type "Access Burst Type" 1 VAL @m_rr_com - VAL_ab_type@ VAR acc_tech_typ "Access Technology Type" 4 VAL @m_rr_com - VAL_acc_tech_typ@ VAR pow_class "RF Power Capability" 3 VAL @m_rr_com - VAL_pow_class@ VAR radio_cap_1 "Associated Radio Capability 1" 4 VAL @m_rr_com - VAL_pow_class@ VAR radio_cap_2 "Associated Radio Capability 2" 4 VAL @m_rr_com - VAL_pow_class@ VAR rgsm_class "R Support (R-GSM Class)" 3 VAL @m_rr_com - VAL_pow_class@ VAR gsm400_cap "GSM 400 Associated Radio Capability" 4 VAL @m_rr_com - VAL_pow_class@ VAR t_gsm400_cap %TI_PS_FF_REL99_AND_ABOVE% "T-GSM 400 Associated Radio Capability" 4 VAL @m_rr_com - VAL_pow_class@ VAR t_gsm900_cap %TI_PS_FF_REL99_AND_ABOVE% "T-GSM 400 Associated Radio Capability" 4 VAL @m_rr_com - VAL_pow_class@ VAR gsm850_cap "GSM 850 Associated Radio Capability" 4 VAL @m_rr_com - VAL_pow_class@ VAR pcs1900_cap "PCS 1900 Associated Radio Cap." 4 VAL @m_rr_com - VAL_pow_class@ VAR ba_start_rtd "BA Index Start RTD" 5 VAR ba_start_bsic "BA Index Start BSIC" 5 VAR bep_period "BEP Period" 4 VAR bool "Boolean; the value is set (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR support "Feature Support; MS does supports a feature (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR es_ind "Early Classmark Sending; 'controlled early classmark sending' option is implemented (1) or not (0) in the MS" 1 VAL @m_rr_com - VAL_bool@ VAR ps "Pseudo Synchronisation capability; Pseudo synchronisation capabilty is present (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR mt_pp_sms "Short Message capability; MS does supports (1) MT point to point SMS or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR vgcs "Voice Group Call Service; VGCS capability and notification wanted (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR vbs "Voice Broadcast Service; VBS capability and notification wanted (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR class3 "Classmark 3; The MS supports options that are indicated in classmark 3 (1) or it does not support any classmark 3 options (0)" 1 VAL @m_rr_com - VAL_bool@ VAR lcsva "LCSVA capability; LCS value added location request notification supported (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR solsa "SoLSA Supported; MS does supports SoLSA (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR cmsp "CMSP Supported; MS does supports (1) CM service Prompt (network initiated MO CM connection request) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR ext_meas "Extended Measurement Capability; MS does supports 'extended measurements`(1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR meas "Measurement Capability; Indicates whether the IE contains any value about the measurement capabilities or not" 1 VAL @m_rr_com - VAL_bool@ VAR pos "MS Positioning Method Capability; Indicates whether MS does supports positioning method or not" 1 VAL @m_rr_com - VAL_bool@ VAR edge "EDGE Structure; Indicates whether MS does supports the EDGE or not" 1 VAL @m_rr_com - VAL_bool@ VAR edge_ms "Multi Slot Capability; Indicates whether MS does supports the use of multiple timeslots or not" 1 VAL @m_rr_com - VAL_bool@ VAR ms "Multi Slot Capability; indicates whether MS does supports the use of multiple timeslots or not" 1 VAL @m_rr_com - VAL_bool@ VAR hscsd_ms "HSCSD Multi Slot Capability; indicates whether MS supports the use of multiple timeslots or not" 1 VAL @m_rr_com - VAL_bool@ VAR gprs_ms "GPRS Multi Slot Capability; indicates whether MS supports the use of multiple timeslots or not" 1 VAL @m_rr_com - VAL_bool@ VAR ecsd_ms "ECSD Multi Slot Capability; indicates whether MS supports the use of multiple timeslots or not" 1 VAL @m_rr_com - VAL_bool@ VAR egprs_ms "EGPRS Multi Slot Capability; indicates whether MS supports the use of multiple timeslots or not" 1 VAL @m_rr_com - VAL_bool@ VAR mod "Modulation Capability; MS does supports 8-PSK modulation for uplink and downlink (1) or only for downlink (0) in addition to GSMK" 1 VAL @m_rr_com - VAL_bool@ VAR assist_eotd "MS assisted E-OTD; MS does supports assisted E-OTD (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR based_eotd "MS based E-OTD; MS does supports based E-OTD (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR assist_gps "MS assisted GPS; MS does supports assisted GPS (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR based_gps "MS based GPS; MS does supports based GPS (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR conv_gps "MS conventional GPS; MS does supports conventional GPS (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR umts_fdd "UMTS FDD Radio Access Technology; MS does supports UMTS FDD (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR umts_tdd "UMTS 3.84 Mcps TDD Radio Access Technology; MS does supports UMTS TDD (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR cdma2000 "CDMA 2000 Radio Access Technology; MS does supports CDMA 2000 (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR mac_support "MAC Mode support; MS does supports dynamice and fixed allocation (1) or only exclusive allocation (0)" 1 VAL @m_rr_com - VAL_bool@ VAR compact "COMPACT Interference Measurement Capability; COMPACT Interference Measurement Capability is implemented (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR gprs_eda "GPRS Extended Dynamic Allocation Capability; MS does supports dynamice and fixed allocation (1) or only exclusive allocation (0)" 1 VAL @m_rr_com - VAL_bool@ VAR egprs_eda "EGPRS Extended Dynamic Allocation Capability; MS does supports dynamice and fixed allocation (1) or only exclusive allocation (0)" 1 VAL @m_rr_com - VAL_bool@ VAR a5_1 "A5/1; Encryption algorithm A5/1. Note inverse logic for the A5/1 encryption algorithm between classmark 1 and 2 on the one hand (available=0 or not=1) and radio access capability on the other hand (available=1 or not=0)." 1 VAL @m_rr_com - VAL_bool@ VAR a5_2 "A5/2; Encryption algorithm A5/2 available (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR a5_3 "A5/3; Encryption algorithm A5/3 available (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR a5_4 "A5/4; Encryption algorithm A5/4 available (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR a5_5 "A5/5; Encryption algorithm A5/5 available (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR a5_6 "A5/6; Encryption algorithm A5/6 available (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR a5_7 "A5/7; Encryption algorithm A5/7 available (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR dtm_g "DTM GPRS Multi Slot Capability; GPRS MS does supports dual transfer mode (DTM)" 1 VAL @m_rr_com - VAL_bool@ VAR dtm_e "DTM EGPRS Multi Slot Capability; EGPRS MS does supports dual transfer mode (DTM)" 1 VAL @m_rr_com - VAL_bool@ VAR dummy_r99_ind "Dummy R99 inclusion indicator; A dummy field to suppress R99 fields (esp.in MS RACAP)" 1 VAL @m_rr_com - VAL_bool@ VAR flag "Flag" 1 VAL @m_rr_com - VAL_flag@ VAR bsic "BSIC" 6 VAR bss_paging_coord "BSS paging co-ordination" 1 VAL @m_rr_com - VAL_bss_paging_coord@ VAR bs_cv_max "BS_CV_MAX" 4 VAR ctrl_ack_type "CONTROL_ACK_TYPE" 1 VAL @m_rr_com - VAL_ctrl_ack_type@ VAR drx_t_max "DRX_TIMER_MAX" 3 VAR dtm_g_ms_class "DTM GPRS Multi Slot Sub-Class" 2 VAL @m_rr_com - VAL_dtm_g_ms_class@ VAR dtm_e_ms_class "DTM EGPRS Multi Slot Sub-Class; only if the MS supports EGPRS DTM" 2 VAL @m_rr_com - VAL_dtm_g_ms_class@ VAR dtm_g_high_ms_class %TI_PS_FF_REL99_AND_ABOVE% "DTM GPRS High Multi Slot Sub-Class" 3 VAL @m_rr_com - VAL_dtm_g_high_ms_class@ VAR dtm_e_high_ms_class "DTM EGPRS High Multi Slot Sub-Class; only if the MS supports EGPRS DTM" 3 VAR rep_acch_cap %TI_PS_FF_REL99_AND_ABOVE% "Indicates whether the MS supports Repeated SACCH and Repeated FACCH" 1 VAL @m_rr_com - VAL_rep_acch_cap@ VAR dtm_support "DTM support by the cell" 1 VAL @m_rr_com - VAL_dtm_support@ VAR ext_len "Extension Length" 6 VAR spare_ext "Spare bits(s)" 1 VAR egprs_packet_channel_request "EGPRS packet channel request message sent" 1 VAL @m_rr_com - VAL_egprs_packet_channel_request@ VAR bands "Supported Frequency Bands; bitmask of all available frequency bands" 8 VAL @m_rr_com - VAL_bands@ VAR setbands "Set Frequency Bands; bitmask of set frequency bands" 8 VAL @m_rr_com - VAL_bands@ VAR egsm "Frequency capability" 1 VAL @m_rr_com - VAL_egsm@ VAR freq_scroll "Frequency Scrolling" 1 VAL @m_rr_com - VAL_freq_scroll@ VAR gsm400_supp "GSM 400 Bands Supported" 2 VAL @m_rr_com - VAL_gsm400_supp@ VAR t_gsm400_supp %TI_PS_FF_REL99_AND_ABOVE% "T-GSM 400 Bands Supported" 2 VAR msg_type "Message Type" 8 VAR pow_8psk_cap "8-PSK Power Capability" 2 VAL @m_rr_com - VAL_pow_8psk_cap@ VAR egde_pow1 "EGDE RF Power Capability 1" 2 VAL @m_rr_com - VAL_pow_8psk_cap@ VAR egde_pow2 "EGDE RF Power Capability 2" 2 VAL @m_rr_com - VAL_pow_8psk_cap@ VAR mod_cap "Modulation Capability" 1 VAL @m_rr_com - VAL_mod_cap@ VAR mb_value "Multiband Support" 3 VAL @m_rr_com - VAL_mb_value@ VAR ms_class "Multi Slot Class" 5 VAL @m_rr_com - VAL_ms_class@ VAR gsm_ms_class "GSM Multi Slot Class" 5 VAL @m_rr_com - VAL_ms_class@ VAR edge_ms_class "EDGE Multi Slot Class" 5 VAL @m_rr_com - VAL_ms_class@ VAR hscsd_ms_class "HSCSD Multi Slot Class" 5 VAL @m_rr_com - VAL_ms_class@ VAR gprs_ms_class "GPRS Multi Slot Class" 5 VAL @m_rr_com - VAL_ms_class@ VAR ecsd_ms_class "ECSD Multi Slot Class" 5 VAL @m_rr_com - VAL_ms_class@ VAR egprs_ms_class "EGPRS Multi Slot Class" 5 VAL @m_rr_com - VAL_ms_class@ VAR nmo "NMO" 2 VAL @m_rr_com - VAL_nmo@ VAR num_cells "Number of Cells" 7 VAR rem_bsic "Number Remaining BSIC" 7 VAR dec "PAN_DEC" 3 VAR inc "PAN_INC" 3 VAR pmax "PAN_MAX" 3 VAR pfc_feature_mode "PFC feature support by the N/W" 1 VAL @m_rr_com - VAL_pfc_feature_mode@ VAR rtd6 "Real Time Difference 6 Bit" 6 VAR rtd12 "Real Time Difference 12 Bit" 12 VAR rep_priority "Reporting Priority" 1 VAL @m_rr_com - VAL_rep_priority@ VAR rf_pow_cap "RF power capability" 3 VAL @m_rr_com - VAL_rf_pow_cap@ VAR rev_lev "Revision Level" 2 VAL @m_rr_com - VAL_rev_lev@ VAR rev99 %REL99% "Revision Level" 1 VAL @m_rr_com - VAL_rev99@ VAR single_band "Single GSM Band Support" 4 VAL @m_rr_com - VAL_single_band@ VAR sms_val "Switch-Measure-Switch-Value" 4 VAL @m_rr_com - VAL_sms_val@ VAR sm_val "Switch-Measure-Value" 4 VAL @m_rr_com - VAL_sms_val@ VAR ss_screen "SS Screening Indicator" 2 VAL @m_rr_com - VAL_ss_screen@ VAR t3168 "T3168" 3 VAR t3192 "T3192" 3 VAR ucs2_treat "UCS2 treatment" 1 VAL @m_rr_com - VAL_ucs2_treat@ VAR rep_offset_900 "900 reporting offset" 3 VAL @m_rr_com - VAL_rep_offset_900@ VAR rep_offset_1800 "1800 reporting offset" 3 VAL @m_rr_com - VAL_rep_offset_900@ VAR rep_offset_400 "400 reporting offset" 3 VAL @m_rr_com - VAL_rep_offset_900@ VAR rep_offset_1900 "1900 reporting offset" 3 VAL @m_rr_com - VAL_rep_offset_900@ VAR rep_offset_850 "850 reporting offset" 3 VAL @m_rr_com - VAL_rep_offset_900@ VAR th_rep_900 "900 reporting threshold" 3 VAL @m_rr_com - VAL_th_rep_900@ VAR th_rep_1800 "1800 reporting threshold" 3 VAL @m_rr_com - VAL_th_rep_900@ VAR th_rep_400 "400 reporting threshold" 3 VAL @m_rr_com - VAL_th_rep_900@ VAR th_rep_1900 %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "1900 reporting threshold" 3 VAL @m_rr_com - VAL_th_rep_900@ VAR th_rep_850 "850 reporting threshold" 3 VAL @m_rr_com - VAL_th_rep_900@ VAR ccn_active "Indicates NACC support by rel 4 network" 1 VAL @m_rr_com - VAL_ccn_active@ VAR nw_ext_ul_tbf "Indicates Extended UL TBF support by rel 4 network" 1 VAL @m_rr_com - VAL_nw_ext_ul_tbf@ VAR gsm700_cap "GSM 700 Associated Radio Capability" 4 VAL @m_rr_com - VAL_pow_class@ VAR umts_tdd_128 %REL99 OR TI_PS_FF_REL99_AND_ABOVE% "UMTS 1.28 Mcps TDD Radio Access Technology; MS does supports UMTS TDD (1) or not (0)" 1 VAL @m_rr_com - VAL_bool@ VAR geran_feat_pack_1 %REL99 OR TI_PS_FF_REL99_AND_ABOVE% "Network Support for GERAN Feature 1 Package" 1 VAL @m_rr_com - VAL_bool@ VAR ext_dtm_g_ms_class %REL99 OR TI_PS_FF_REL99_AND_ABOVE% "Extended DTM GPRS Multi Slot Sub-Class" 2 VAR ext_dtm_e_ms_class %REL99 OR TI_PS_FF_REL99_AND_ABOVE% "Extended DTM EGPRS Multi Slot Sub-Class" 2 VAR dummy_r4_ind "Dummy R4 inclusion indicator; A dummy field to suppress R4 fields (esp.in MS RACAP)" 1 VAL @m_rr_com - VAL_bool@ VAR ccn_support %REL99% "CCN is supported towards the corresponding cell" 1 VAL @m_rr_com - VAL_ccn_supported@ VAR mod_ms_sup %REL99% "Modulation based multislot class support" 1 VAL @m_rr_com - VAL_bool@ VAR tdd_indic0 %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "TDD_Indic0" 1 VAR tdd_ncell_data %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "bits 1-7 are the Cell Parameter, bit 8 is the Sync Case and bit 9 is the Diversity bit. " 9 VAR fdd_indic0 %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "FDD_Indic0" 1 VAR fdd_ncell_data %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "bits 1-9 are the Scrambling Code and bit 10 is the corresponding Diversity Parameter" 10 VAR index_start_3g %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Index Start 3G" 7 VAR abs_index_emr %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Absolute Index start EMR" 7 VAR bw_fdd %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Bandwidth FDD" 3 VAR bw_tdd %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Bandwidth TDD" 3 VAR fdd_arfcn %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "FDD_ARFCN" 14 VAR fdd_arfcn_index %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "FDD ARFCN index" 3 VAR tdd_arfcn %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "TDD_ARFCN" 14 VAR tdd_arfcn_index %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "TDD ARFCN index" 3 VAR cdma2000_frequency_band "cdma2000 frequency band " 5 VAR cdma2000_frequency "cdma2000 frequency" 11 VAR number_cdma2000_cells "number_cdma2000_cells" 5 VAR pilot_PN_offset "Pilot PN offset" 9 VAR td_mode "TD_MODE" 2 VAR td_power_level "TD_POWER_LEVEL " 3 VAR qof "QOF" 2 VAR walsh_len_a "WALSH_LEN_A" 3 VAR aux_pilot_walsh "AUX_PILOT_WALSH" 1 VAR walsh_len_b "WALSH_LEN_B " 3 VAR aux_td_walsh "AUX_TD_WALSH" 1 VAR aux_td_power_level "AUX_TD_POWER_LEVEL" 2 VAR sr3_prim_pilot "SR3_PRIM_PILOT" 2 VAR sr3_pilot_power1 "SR3_PILOT_POWER1" 3 VAR sr3_pilot_power2 "SR3_PILOT_POWER2" 3 VAR walsh_len_c "WALSH_LEN_C" 3 VAR aux_walsh_len "AUX_WALSH_LEN " 1 VAR qof1 "QOF1" 2 VAR walsh_length1 "WALSH_LENGTH1" 3 VAR aux_pilot_walsh1 "AUX_PILOT_WALSH1" 1 VAR qof2 "QOF2" 2 VAR walsh_length2 "WALSH_LENGTH2 " 3 VAR aux_pilot_walsh2 "AUX_PILOT_WALSH2" 1 VAR flag_3bit "FLAG 3 bits" 3 VAR search_prio_3g %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Search Prio 3G" 1 VAR tdd_multirat_rep %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "TDD Multirat Reporting" 2 VAR cdma2000_multirat_rep %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "CDMA2000 Multirat Reporting" 2 VAR fdd_rep_quant %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "FDD REP Quant" 1 VAR fdd_multi_rep %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "FDD MULTI Reporting Struct" 2 VAR fdd_rep_offset %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "FDD Reporting Offset" 3 VAR fdd_rep_thres %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "FDD Reporting Threshold" 3 VAR tdd_rep_offset %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "TDD Reporting Offset" 3 VAR cdma2000_rep_offset %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "CDMA2000 Reporting Offset" 3 VAR tdd_rep_thres %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "TDD Reporting Threshold" 3 VAR cdma2000_rep_thres %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "CDMA2000 Reporting Threshold" 3 VAR qsearch_c "Qsearch C" 4 VAR flag_ra_cap2 %!REL99% "Valid flag for MS RA capability value part II; Second part of MS RA capability is available (1) or not (1)" 1 VAL @m_rr_com - VAL_bool@ VAR high_ms_cap %TI_PS_FF_REL99_AND_ABOVE% "High Multislot Capability" 2 VAR geran_iu_mod_cap %TI_PS_FF_REL99_AND_ABOVE% "GERAN Iu Mode Capabilities" 1 VAR geran_feat_pack_2 %TI_PS_FF_REL99_AND_ABOVE% "GERAN Feature Package 2" 1 VAL @m_rr_com - VAL_bool@ VAR gmsk_ms_pwr_prof %TI_PS_FF_REL99_AND_ABOVE% "GMSK Multislot Power Profile" 2 VAL @m_rr_com - VAL_ms_pwr_profile@ VAR psk8_ms_pwr_prof %TI_PS_FF_REL99_AND_ABOVE% "8-PSK Multislot Power Profile" 2 VAL @m_rr_com - VAL_ms_pwr_profile@ VAR dl_adv_rx_per %TI_PS_FF_REL99_AND_ABOVE% "Downlink Advanced Receiver Performance" 2 VAL @m_rr_com - VAL_dl_adv_rx_per@ VAR dtm_enhance_cap %TI_PS_FF_REL99_AND_ABOVE% "DTM Enhancements Capability" 1 VAL @m_rr_com - VAL_bool@ VAR offset_required %TI_PS_FF_REL99_AND_ABOVE% "Offset required" 1 COMP a5_bits "A5 bits" { a5_1 ; A5/1; Encryption algorithm A5/1. Note inverse logic for the A5/1 encryption algorithm between classmark 1 and 2 on the one hand (available=0 or not=1) and radio access capability on the other hand (available=1 or not=0). a5_2 ; A5/2; Encryption algorithm A5/2 available (1) or not (0) a5_3 ; A5/3; Encryption algorithm A5/3 available (1) or not (0) a5_4 ; A5/4; Encryption algorithm A5/4 available (1) or not (0) a5_5 ; A5/5; Encryption algorithm A5/5 available (1) or not (0) a5_6 ; A5/6; Encryption algorithm A5/6 available (1) or not (0) a5_7 ; A5/7; Encryption algorithm A5/7 available (1) or not (0) } COMP acc_tech_req %REL99% "Access Technologies Request" { CSN1_S1 acc_tech_typ [0..MAX_NUM_ACC_TYPE] ; Access Technology Type } COMP add_acc_tech_elem %REL99% "Additonal Access Technologies Element" { acc_tech_typ ; Access Technology Type pow_class ; GMSK Power Class pow_8psk_cap ; 8PSK Power Class } COMP add_acc_tech %REL99% "Additonal Access Technologies" { CSN1_S1 add_acc_tech_elem [1.. MAX_ADD_RA_CAP] ; Additional Access Technology Element } COMP bsic_struct %REL99% "BSIC Structure" { freq_scroll %REL99% ; Frequency Scrolling bsic ; BSIC } COMP gprs_bsic %REL99% "GPRS BSIC Description" { CSN1_S1 ba_start_bsic ; BA Index Start BSIC bsic ; BSIC rem_bsic %REL99% ; Number Remaining BSIC bsic_struct [rem_bsic.. MAX_BSIC] ; BSIC Structure } COMP mob_class_1 "Mobile Station Classmark 1" { .0 ; Spare rev_lev ; Revision level es_ind ; Early Classmark Sending a5_1 ; A5/1; Encryption algorithm A5/1 available (0) or not (1). Please note the inverse logic! rf_pow_cap ; RF power capability } COMP mob_class_2 "Mobile Station Classmark 2" { .0 ; spare rev_lev ; Revision level; Indicates the revision level of the MS es_ind ; Early Classmark Sending; 'Controlled Early Classmark Sending' option is implementation (1) or not (0) a5_1 ; A5/1; Encryption algorithm A5/1 available (0) or not (1). Please note the inverse logic! rf_pow_cap ; RF power capability (CM2); Indication of the RF power capabilities corresponding to the supported band .0 ; spare ps ; Pseudo Synchronisation capability; PS capability present (1) or not present (0) ss_screen ; SS Screen. Indicator mt_pp_sms ; Short Message capability; MS does supports (1) MT point to point SMS or not (0) vbs ; VBS Notification Reception; VBS capability and notifications wanted (1) or vice versa (0) vgcs ; VGCS Notification Reception; VGCS capability and notifications wanted (1) or vice versa (0) egsm ; Frequency capability; When the GSM 850 or DCS 1800 or PCS 1900 band is used, this bit shall be sent with the value '0'. When a GSM 900 band is used, this bit describes the support of the extension band class3 ; Classmark 3; The MS supports options that are indicated in classmark 3 (1) or it does not support any classmark 3 options (0) .0 ; spare lcsva ; LCSVA capability; LCS value added location request notification supported (1) or not (0) ucs2_treat ; UCS2 treatment; Indicates the likely treatment by the MS of UCS2 encoded solsa ; SoLSA Supported; MS supports SoLSA (1) or not (0) cmsp ; CMSP Supported; MS supports (1) CM service Prompt (network initiated MO CM connection request) or not (0) a5_3 ; A5/3; Encryption algorithm A5/3 available (1) or not (0) a5_2 ; A5/2; Encryption algorithm A5/2 available (1) or not (0) } COMP dtm_ms "DTM Multislot Structure" { dtm_g_ms_class ; DTM GPRS Multi Slot Sub-Class mac_support ; MAC Mode support CSN1_S1 dtm_e_ms_class ; DTM EGPRS Multi Slot Sub-Class } COMP dtm_high_ms %TI_PS_FF_REL99_AND_ABOVE% "DTM High Multislot Structure" { dtm_g_high_ms_class ; DTM GPRS High Multi Slot Sub-Class offset_required ; Offset Required CSN1_S1 dtm_e_high_ms_class ; DTM EGPRS High Multi Slot Sub-Class } COMP egde_struct "EGDE Structure" { mod ; EDGE Modulation Capability CSN1_S1 egde_pow1 ; EGDE RF Power Capability 1 CSN1_S1 egde_pow2 ; EGDE RF Power Capability 2 } COMP gprs_rep_prio %REL99% "GPRS REPORT PRIORITY Description" { num_cells %REL99% ; Number cells rep_priority [num_cells.. MAX_NNC] %REL99% ; Reporting Priority } COMP gsm400_struct "GSM 400 Bands Supported Structure" { gsm400_supp ; GSM 400 Bands Supported gsm400_cap ; GSM 400 Associated Radio Capability } COMP t_gsm400_struct %TI_PS_FF_REL99_AND_ABOVE% "GSM 400 Bands Supported Structure" { t_gsm400_supp ; T-GSM 400 Bands Supported t_gsm400_cap ; T-GSM 400 Associated Radio Capability } COMP measurement "Measurement Capability" { sms_val ; Switch-Measure-Switch-Value sm_val ; Switch-Measure-Value } COMP pos_method "MS Positioning Method" { assist_eotd ; MS assisted E-OTD; bit 5 based_eotd ; MS based E-OTD; bit 4 assist_gps ; MS assisted GPS; bit 3 based_gps ; MS based GPS; bit 2 conv_gps ; MS conventional GPS; bit 1 } COMP pow_class4 "RF Power Capability (4 bits); Power Class of GSM 400, GSM 850, GSM 900, DCS 1800, PCS 1900" { .0 ; spare pow_class ; RF Power Capability } COMP dtm_struct %REL99% "DTM (E-)GPRS Multislot Sub-Class and MAC Mode Support" { dtm_g_ms_class ; DTM GPRS Multi Slot Sub-Class mac_support ; MAC Mode support CSN1_S1 dtm_e_ms_class ; DTM EGPRS Multi Slot Sub-Class } COMP egprs_struct %REL99% "GPRS Multislot Class and Extended Dynamic Allocation Capability" { egprs_ms_class ; EGPRS multislot class egprs_eda ; EGPRS Extended Dynamic Allocation Capability } COMP gprs_struct "GPRS Multislot Class and Extended Dynamic Allocation Capability" { gprs_ms_class ; GPRS multislot class gprs_eda ; GPRS Extended Dynamic Allocation Capability } COMP rf_ms "MS RF Multi Slot Capability" { gsm_ms_class ; GSM Multi Slot Class; Zero indicates that MS doesn?t supports the use of multiple timeslots .000 ; spare edge_ms_class ; EDGE Multi Slot Class; Zero indicates that MS doesn?t supports the use of multiple timeslots .000 ; spare hscsd_ms_class ; HSCSD Multi Slot Class; Zero indicates that MS doesn?t supports the use of multiple timeslots .000 ; spare gprs_ms_class ; GPRS Multi Slot Class; Zero indicates that MS doesn?t supports the use of multiple timeslots dtm_g ; DTM GPRS Multi Slot Capability; GPRS MS does supports dual transfer mode (DTM) dtm_g_ms_class ; DTM GPRS Multi Slot Sub-Class; DTM GPRS Multi Slot Sub-Class (independent from the Multi Slot Capabilities field.) ecsd_ms_class ; ECSD Multi Slot Class; Zero indicates that MS doesn?t supports the use of multiple timeslots .000 ; spare egprs_ms_class ; EGPRS Multi Slot Class; Zero indicates that MS doesn?t supports the use of multiple timeslots dtm_e ; DTM EGPRS Multi Slot Capability; Enhanced GPRS MS does supports dual transfer mode (DTM) dtm_e_ms_class ; DTM EGPRS Multi Slot Sub-Class; DTM EGPRS Multi Slot Sub-Class (independent from the Multi Slot Capabilities field.) } COMP rtds6 %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Real Time Difference Structure 6 Bit" { CSN1_S0 rtd6 [0..MAXRTD6] ; Real Time Difference 6 Bit } TYPEDEF COMP rtds6 rtds6_add "Real Time Difference Structure 6 Bit" COMP rtdd6 %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Real Time Difference Description 6 Bit" { CSN1_S1 ba_start_rtd ; BA Index Start RTD rtds6 ; Real Time Difference Structure 6 Bit CSN1_S0 rtds6_add [0..MAXRTDS6] ; Real Time Difference Structure 6 Bit } COMP rtds12 %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Real Time Difference Structure 12 Bit" { CSN1_S0 rtd12 [0..MAXRTD12] ; Real Time Difference 12 Bit } TYPEDEF COMP rtds12 rtds12_add "Real Time Difference Structure 12 Bit" COMP rtdd12 %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Real Time Difference Description 12 Bit" { CSN1_S1 ba_start_rtd ; BA Index Start RTD rtds12 ; Real Time Difference Structure 12 Bit CSN1_S0 rtds12_add [0..MAXRTDS12] ; Real Time Difference Structure 12 Bit } COMP rtdd %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "GPRS Real Time Difference Description" { CSN1_S1 rtdd6 ; Real Time Difference Description 6 Bit CSN1_S1 rtdd12 ; Real Time Difference Description 12 Bit } COMP report_900 %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Reporting 900" { rep_offset_900 ; Reporting Offset 900 th_rep_900 ; Reporting Threshold 900 } COMP report_1800 %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Reporting 1800" { rep_offset_1800 ; Reporting Offset 1800 th_rep_1800 ; Reporting Threshold 1800 } COMP report_400 %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Reporting 400" { rep_offset_400 ; Reporting Offset 400 th_rep_400 ; Reporting Treshold 400 } COMP report_1900 %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Reporting 1900" { rep_offset_1900 ; Reporting Offset 1900 th_rep_1900 ; Reporting Threshold 1900 } COMP report_850 %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Reporting 850" { rep_offset_850 ; Reporting Offset 850 th_rep_850 ; Reporting Threshold 850 } COMP sms_sm_value "MS Measurement Capability" { sms_val ; Switch-Mesure-Switch Value sm_val ; Switch-Measure-Value } COMP ms_struct "Multislot Capability Struct" { CSN1_S1 hscsd_ms_class ; HSCSD multislot class CSN1_S1 gprs_struct ; GPRS multislot class and Extended Dynamic Allocation Capability CSN1_S1 sms_sm_value ; MS Measurement Capability CSN1_S1 ecsd_ms_class %REL99% ; ECSD multislot class CSN1_S1 egprs_struct %REL99% ; EGPRS multislot class and Extended Dynamic Allocation Capability CSN1_S1 dtm_struct %REL99% ; DTM (E-)GPRS Multislot Sub-Class and MAC Mode Support } COMP acc_cap "Access capabilities" { pow_class ; RF Power Capability CSN1_S1 a5_bits ; A5 bits es_ind ; Early Classmark Sending ps ; Pseudo Synchronisation capability vgcs ; Voice Group Call Service vbs ; Voice Broadcast Service CSN1_S1 ms_struct ; Multi Slot Capability Struct CSN1_S1 pow_8psk_cap %REL99% ; Modulation 8-PSK Power Capabilty compact %REL99% ; COMPACT Interference Measurement Capability rev99 %REL99% ; Revision Level Indicator (R99) umts_fdd %REL99% ; UMTS FDD Radio Access Technology umts_tdd %REL99% ; UMTS TDD 3.84 Radio Access Technology cdma2000 %REL99% ; CDMA 2000 Radio Access Technology } COMP ra_cap2 %!REL99% "RAC structure for R97" { acc_tech_typ ; Access Technology Type GSM7_LV acc_cap ; Access Capabilities .0 ; Spare } COMP ra_cap_values %REL99% "Actual MS RA capability value part" { acc_tech_typ ; Access Technology Type < (acc_tech_typ # 15) GSM7_LV acc_cap > ; Access Capabilities < (acc_tech_typ = 15) GSM7_LV add_acc_tech > ; Additional Access Technologies } COMP ra_cap_r %REL99% "Recursive MS RA capability value part" { ra_cap_values ; Actual MS RA capability value part } COMP ra_cap "MS RA capability value part" { ra_cap_values %REL99% ; Actual MS RA capability value part CSN1_S1 ra_cap_r [0.. MAX_ADD_RA_CAP] %REL99% ; Recursive MS RA capability value acc_tech_typ %!REL99% ; Access Technology Type GSM7_LV acc_cap %!REL99% ; Access Capabilities flag_ra_cap2 %!REL99% ; Valid flag for MS RA capability value part II < (flag_ra_cap2=1) ra_cap2 > %!REL99% ; MS RA capability value part II } COMP rf_power "MS RF Power Classes" { pow_class4 [5] ; RF Power Capability (4 bits); Power Class of GSM 400, GSM 850, GSM 900, DCS 1800, PCS 1900 egde_pow1 ; EGDE RF Power Capability 1; 8-PSK Power Class of GSM 400, GSM 850, GSM 900 egde_pow2 ; EGDE RF Power Capability 2; 8-PSK Power Class of DCS 1800, PCS 1900 } COMP rf_cap "MS RF Capability" { setbands ; Set Frequency Bands; bitmask of set frequency bands bands ; Supported Frequency Bands; bitmask of all available frequency bands rf_power ; MS RF Power Classes; MS RF Power Classes rf_ms ; MS RF Multi Slot Capability es_ind ; Early Classmark Sending; 'Controlled Early Classmark Sending' option is implementation (1) or not (0) ps ; Pseudo Synchronisation capability; PS capability present (1) or not present (0) mt_pp_sms ; Short Message capability; MS does supports (1) MT point to point SMS or not (0) lcsva ; LCSVA capability; LCS value added location request notification supported (1) or not (0) solsa ; SoLSA Supported; MS does supports SoLSA (1) or not (0) cmsp ; CMSP Supported; MS does supports (1) CM service Prompt (network initiated MO CM connection request) or not (0) mod ; EDGE Modulation Capability; The Modulation Capability field indicates the supported modulation scheme by MS in addition to GMSK. 8-PSK supported for downlink reception only (0) or for for uplink transmission and downlink reception (1) mac_support ; MAC Mode support; MS does supports Dynamic and Fixed Allocation (1) or only supports Exclusive Allocation (0) meas ; Measurement Capability; Indicates whether a IE shall contain any value about the measurement capabilities (1) or not (0). ext_meas ; Extended Measurement Capability; The MS does supports 'Extended Measurement' (1) or not (0) compact ; COMPACT Interference Measurement Capability; The MS does support COMPACT Interference Measurement (1) or not (0) vbs ; VBS Notification Reception; VBS capability and notifications wanted (1) or vice versa (0) vgcs ; VGCS Notification Reception; VGCS capability and notifications wanted (1) or vice versa (0) ucs2_treat ; UCS2 treatment; Indicates the likely treatment by the MS of UCS2 encoded ss_screen ; SS Screen. Indicator sms_val ; Switch-Measure-Switch-Value sm_val ; Switch-Measure-Value a5_bits ; A5 bits; Encryption algorithm A5/n available (0) or not (1) .0 ; spare assist_eotd ; MS assisted E-OTD; bit 5 based_eotd ; MS based E-OTD; bit 4 assist_gps ; MS assisted GPS; bit 3 based_gps ; MS based GPS; bit 2 conv_gps ; MS conventional GPS; bit 1 gprs_eda ; GPRS Extended Dynamic Allocation Capability; Extended Dynamic Allocation Capability egprs_eda ; EGPRS Extended Dynamic Allocation Capability; Extended Dynamic Allocation Capability .0 ; spare } COMP pan_struct "PAN Structure" { dec ; PAN_DEC inc ; PAN_INC pmax ; PAN_MAX } COMP ccn_support_description %REL99% "ccn support description towards all neighbour" { num_cells ; Num of Cells ccn_support [num_cells..BIT7_MAX] ; CCN support } COMP ext_dtm_ms %REL99 OR TI_PS_FF_REL99_AND_ABOVE% "Extended DTM Multislot Structure " { ext_dtm_g_ms_class ; Extended DTM GPRS Multi Slot Sub-Class ext_dtm_e_ms_class ; Extended DTM EGPRS Multi Slot Sub-Class } COMP mob_class_3 "Mobile Station Classmark 3" { .0 ; Spare mb_value ; Multiband Support a5_7 ; A5/7 a5_6 ; A5/6 a5_5 ; A5/5 a5_4 ; A5/4 < (mb_value=5 OR mb_value=6) radio_cap_2 > ; Associated Radio Capability 2 < (mb_value=1 OR mb_value=2 OR mb_value=4) .0000 > ; Spare < (mb_value=1 OR mb_value=2 OR mb_value=4 OR mb_value=5 OR mb_value=6) radio_cap_1 > ; Associated Radio Capability 1 CSN1_S1 rgsm_class ; R Support (R-GSM Class) CSN1_S1 ms_class ; Multi Slot Capability ucs2_treat ; UCS2 Treatment ext_meas ; Extended Measurement Capability CSN1_S1 measurement ; Measurement Capability CSN1_S1 pos_method ; MS Positioning Method Capability CSN1_S1 edge_ms_class ; EGDE Multi Slot Capability CSN1_S1 egde_struct ; EGDE Structure CSN1_S1 gsm400_struct ; GSM 400 Bands Supported Structure CSN1_S1 gsm850_cap ; GSM 850 Associated Radio Capability CSN1_S1 pcs1900_cap ; PCS 1900 Associated Radio Cap. umts_fdd ; UMTS FDD Radio Access Technology umts_tdd ; UMTS TDD Radio Access Technology cdma2000 ; CDMA 2000 Radio Access Technology CSN1_S1 dtm_ms ; DTM Multislot Structure CSN1_S1 single_band ; Single Band Support CSN1_S1 gsm700_cap ; GSM 700 Associated Radio Capability umts_tdd_128 ; UMTS 1.28 TDD Radio Access Technology geran_feat_pack_1 ; GERAN Feature 1 Package CSN1_S1 ext_dtm_ms ; Extended DTM Multislot Structure CSN1_S1 high_ms_cap ; High Multislot Capability CSN1_S1 geran_iu_mod_cap ; GERAN Iu Mode Capabilities geran_feat_pack_2 ; GERAN Feature Package 2 gmsk_ms_pwr_prof ; GMSK Multislot Power Profile psk8_ms_pwr_prof ; 8-PSK Multislot Power Profile CSN1_S1 t_gsm400_struct ; T-GSM 400 Bands Supported Structure CSN1_S1 t_gsm900_cap ; T-GSM 900 Associated Radio Capability dl_adv_rx_per ; Downlink Advanced Receiver Performance dtm_enhance_cap ; DTM Enhancements Capability CSN1_S1 dtm_high_ms ; DTM (E)GPRS High Multi Slot Class rep_acch_cap ; Repeated ACCH Capability : bit S_PADDING .00000000 (0) ; N Spare Padding } COMP tdd_ci_struct %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "TDD Neighbour cell information" { tdd_indic0 ; Structured Element Item TDD_CI tdd_ncell_data [0..MAX_TDD_CELLS] ; Structured Element Item } COMP fdd_ci_struct %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "FDD Neighbour cell information" { fdd_indic0 ; Structured Element Item FDD_CI fdd_ncell_data [0..MAX_FDD_CELLS] ; Structured Element Item } COMP rep_u_tdd_cells %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Repeated UTRAN TDD Neighbour cells" { flag ; Flag < (flag=0) tdd_arfcn > ; TDD_ARFCN < (flag=1) tdd_arfcn_index > ; TDD ARFCN index tdd_ci_struct ; TDD neighbour cell info } COMP rep_u_fdd_cells %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Repeated UTRAN FDD Neighbour cells" { flag ; Flag < (flag=0) fdd_arfcn > ; FDD_ARFCN < (flag=1) fdd_arfcn_index > ; FDD ARFCN index fdd_ci_struct ; FDD neighbour cell info } COMP utran_tdd %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "UTRAN TDD description" { CSN1_S1 bw_tdd ; Bandwidth TDD CSN1_S1 rep_u_tdd_cells [0..MAX_TDD] ; Repeated UTRAN TDD Neighbour cells } COMP utran_fdd %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "UTRAN FDD description" { CSN1_S1 bw_fdd ; Bandwidth FDD CSN1_S1 rep_u_fdd_cells [0..MAX_FDD] ; Repeated UTRAN FDD Neighbour cells } COMP threeg_cells %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "3G Neighbour Cell Description" { CSN1_S1 index_start_3g ; Index Start 3G CSN1_S1 abs_index_emr ; Absolute Index start EMR CSN1_S1 utran_fdd ; UTRAN FDD description CSN1_S1 utran_tdd ; UTRAN TDD description } COMP cd2k_str_000 %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Structured Element" { td_mode ; Structured Element Item td_power_level ; Structured Element Item } COMP cd2k_str_001 %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Structured Element" { qof ; Structured Element Item walsh_len_a ; Structured Element Item aux_pilot_walsh [.walsh_len_a+6..8] ; Structured Element Item } COMP cd2k_str_010 %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Structured Element" { qof ; Structured Element Item walsh_len_b ; Structured Element Item aux_td_walsh [.walsh_len_b+6..8] ; Structured Element Item aux_td_power_level ; Structured Element Item td_mode ; Structured Element Item } COMP cd2k_str_011 %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Structured Element" { sr3_prim_pilot ; Structured Element Item sr3_pilot_power1 ; Structured Element Item sr3_pilot_power2 ; Structured Element Item } COMP cd2k_str_110_1 %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Structured Element" { qof1 ; Structured Element Item walsh_length1 ; Structured Element Item aux_pilot_walsh1 [.walsh_length1+6..8] ; Structured Element Item } COMP cd2k_str_110_2 %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Structured Element" { qof2 ; Structured Element Item walsh_length2 ; Structured Element Item aux_pilot_walsh2 [.walsh_length2+6..8] ; Structured Element Item } COMP cd2k_str_110 %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Structured Element" { cd2k_str_011 ; Structured Element Item qof ; Structured Element Item walsh_len_c ; Structured Element Item aux_walsh_len [.walsh_len_c+6..8] ; Structured Element Item cd2k_str_110_1 ; Structured Element Item cd2k_str_110_2 ; Structured Element Item } COMP cd2k_str_all %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Structured Element" { flag_3bit ; Structured Element Item < (flag_3bit=000) cd2k_str_000 > ; Structured Element Item < (flag_3bit=001) cd2k_str_001 > ; Structured Element Item < (flag_3bit=010) cd2k_str_010 > ; Structured Element Item < (flag_3bit=011) cd2k_str_011 > ; Structured Element Item < (flag_3bit=110) cd2k_str_110 > ; Structured Element Item } COMP cd2k_cell_str %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Structured Element" { pilot_PN_offset ; Structured Element Item CSN1_S1 cd2k_str_all ; Structured Element Item } COMP cdma2000_cell_desc %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "CDMA2000 neighbour cell description structure" { cdma2000_frequency_band ; Structured Element Item cdma2000_frequency ; Structured Element Item number_cdma2000_cells ; Structured Element Item cd2k_cell_str [number_cdma2000_cells..MAX_CDMA2K_NEIGH_CELLS] ; Structured Element Item } COMP fdd_report %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "FDD Reporting" { fdd_rep_offset ; FDD Reporting Offset fdd_rep_thres ; FDD Reporting Threshold } COMP tdd_rep %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "TDD Reporting" { tdd_rep_offset ; TDD Reporting Offset tdd_rep_thres ; TDD Reporting Threshold } COMP cdma2000_rep %REL99 AND (TI_PS_FF_EMR OR TI_PS_FF_RTD)% "Structured Element" { cdma2000_rep_offset ; CDMA2000 Reporting Offset cdma2000_rep_thres ; CDMA2000 Reporting Threshold } COMP egprs_pck_ch_req_bep_per %REL99% "EGPRS packet channel and BEP period structure" { egprs_packet_channel_request ; EGPRS packet channel request message sent bep_period ; Packet channel request message in two phase packet access } COMP gprs_ext_info %REL99% "GPRS cell options Extension Information" { flag ; Flag < (flag=1) egprs_pck_ch_req_bep_per > ; EGPRS packet channel and BEP period structure < ( (TAKE, 1) >0 AND flag=0 OR (TAKE, 1) >5) pfc_feature_mode > ; PFC feature support by the N/W < ( (TAKE, 1) >1 AND flag=0 OR (TAKE, 1) >6) dtm_support > ; DTM support by the cell < ((TAKE, 1) >2 AND flag=0 OR (TAKE, 1) >7) bss_paging_coord > ; BSS paging co-ordination < ((TAKE, 1) >3 AND flag=0 OR (TAKE, 1) >8) ccn_active > ; CCN_ACTIVE < ((TAKE, 1) >4 AND flag=0 OR (TAKE, 1) >9) nw_ext_ul_tbf > ; NW_EXT_UTBF } COMP gprs_ext_bits "GPRS cell options extensions Bits IE" { ext_len (KEEP,1) %REL99% ; Extension length gprs_ext_info [.ext_len+1..64] %REL99% ; GPRS cell options extension Information and spare bit(s) ext_len %!REL99% ; Extension length spare_ext [ext_len+1..64] %!REL99% ; spare bit extensions IE } COMP gprs_cell_opt "GPRS Cell Options" { nmo ; NMO t3168 ; T3168 t3192 ; T3192 drx_t_max ; DRX_TIMER_MAX ab_type ; ACCESS_BURST_TYPE ctrl_ack_type ; CONTROL_ACK_TYPE bs_cv_max ; BS_CV_MAX CSN1_S1 pan_struct ; PAN Structure CSN1_S1 gprs_ext_bits ; GPRS cell options extension Bits IE } MSG ms_rf_capability downlink 0b00000001 ; Mobile Station RF Capabilities { GSM3_V msg_type ; Message type GSM3_V rf_cap ; MS RF capability }