FreeCalypso > hg > fc-magnetite
view cdg-hybrid/msg/rr_short_pd.mdf @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 02 Jan 2020 05:38:26 +0000 |
parents | e7a67accfad9 |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : rr_short_pd.mdf ;*** Creation : Thu Jun 19 15:32:12 CST 2008 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Air Interface Message Specification ;*** Document Name : rr_short_pd ;*** Document No. : 8010.602.03.001 ;*** Document Date : 2003-11-06 ;*** Document Status: BEING_PROCESSED ;*** Document Author: LG ;******************************************************************************** PRAGMA SRC_FILE_TIME "Wed Nov 28 10:21:00 2007" PRAGMA LAST_MODIFIED "2003-11-06" PRAGMA ID_AND_VERSION "8010.602.03.001" PRAGMA CCDNAME RR_SHORT ; CCD name tag PRAGMA ALLWAYS_ENUM_IN_VAL_FILE NO ; Adds enumerations in the .val file. CONST L3MAX_ACK 251 ; GSM 4.06, section 5.8.5 CONST L3MAX 251 ; CONST MAX_NNC 96 ; Maximum number of cells in Neighbour cell list for Enhanced Measurements CONST MAX_BSICI 8 ; Maximum invalid BSIC information IE's (21*8-14) / (17+1) = 8 CONST MAX_2GEXT 132 ; Maximum length of MI 2G Extension (21*8-36) = 132 VALTAB VAL_bsic_seen VAL 0 NO_INV_BSIC_SEEN "No cell with invalid BSIC and allowed NCC part of BSIC is seen." VAL 1 INV_BSIC_SEEN "One cell or more with invalid BSIC and allowed NCC part of BSIC is seen." VALTAB VAL_cv_bep VAL 0 CV_BEP_0 "2.00 > std(BEP)/mean(BEP) > 1.75" VAL 1 CV_BEP_1 "1.75 > std(BEP)/mean(BEP) > 1.50" VAL 2 CV_BEP_2 "1.50 > std(BEP)/mean(BEP) > 1.25" VAL 3 CV_BEP_3 "1.25 > std(BEP)/mean(BEP) > 1.00" VAL 4 CV_BEP_4 "1.00 > std(BEP)/mean(BEP) > 0.75" VAL 5 CV_BEP_5 "0.75 > std(BEP)/mean(BEP) > 0.50" VAL 6 CV_BEP_6 "0.50 > std(BEP)/mean(BEP) > 0.25" VAL 7 CV_BEP_7 "0.25 > std(BEP)/mean(BEP) > 0.00" VALTAB VAL_dtx_used VAL 0 DTX_USED_NO "DTX was not used" VAL 1 DTX_USED_YES "DTX was used" VALTAB VAL_inv_bsic_rep VAL 0 NO_REPORT "Indicates that GSM cells with invalid BSIC and allowed NCC part should not be reported" VAL 1 YES_REPORT "Indicates that GSM cells with invalid BSIC and allowed NCC part should be reported" VALTAB VAL_pow_ctrl VAL 0 POW_CTRL_NO "PWRC is not set" VAL 1 POW_CTRL_YES "PWRC is set" VALTAB VAL_rep_rate VAL 0 NORMAL_RATE "SACCH rate reporting." VAL 1 REDUCED_RATE "Reduced reporting rate allowed." VALTAB VAL_report_type VAL 0 RT_EMR "MS shall use the Enhanced Measurement Report message, if at least one BSIC is allocated to each BA frequency, otherwise the Measurement Report message." VAL 1 RT_MR "The MS shall use the Measurement Report message for reporting." VALTAB VAL_scale VAL 0 SCALE_ZERO_DB "0 dB offset is used for the reported RXLEV values" VAL 1 SCALE_TEN_DB "+10 dB offset is used for the reported RXLEV values" VALTAB VAL_scale_ord VAL 0 SC_ORD_ZERO_DB "0 dB offset, which shall be used for the reported RXLEV values" VAL 1 SC_ORD_TEN_DB "+10 dB offset, which shall be used for the reported RXLEV values" VAL 2 SC_ORD_AUTOMATIC "automatic offset, which shall be used for the reported RXLEV values" VALTAB VAL_sl2h VAL DEF "reserved" VAL 0 SL2H_0 "Short Layer 2 header: UI command frame" VAR ba_start_bsic "BA Index Start BSIC" 5 VAR ba_ind "BA Sequence Number indication" 1 VAR ba_ind_3g "3G BA Sequence Number indication" 1 VAR bsic "BSIC" 6 VAR bsic_seen "BSIC Seen" 1 VAL @m_rr_short_pd - VAL_bsic_seen@ VAR cv_bep "Coefficient of Variation of BEP" 3 VAL @m_rr_short_pd - VAL_cv_bep@ VAR dtx_used "DTX USED" 1 VAL @m_rr_short_pd - VAL_dtx_used@ VAR extens "Extension" 1 VAR e_len "Extension Length" 8 VAR inv_bsic_rep "Invalid BSIC reporting" 1 VAL @m_rr_short_pd - VAL_inv_bsic_rep@ VAR mean_bep "Mean BEP" 5 VAR mp_cm "Measurement parameters change mark" 1 VAR msg_type "Message Type" 6 VAR mi_idx "MI Index" 4 VAR mi_c "MI Counter" 4 VAR mr "Multiband Reporting" 2 VAR nr_rcvd_bl "Number Of Received Blocks" 5 VAR pow_ctrl "Power Control Indicator" 1 VAL @m_rr_short_pd - VAL_pow_ctrl@ VAR rep_rate "Reporting Rate" 1 VAL @m_rr_short_pd - VAL_rep_rate@ VAR report_type "Report Type" 1 VAL @m_rr_short_pd - VAL_report_type@ VAR rxlev "RX Level" 6 VAR rep_q "Reporting Quantity" 6 VAR rxqual_full "RX Quality Full Serving Cell" 3 VAR scale "Scale" 1 VAL @m_rr_short_pd - VAL_scale@ VAR scale_ord "Scale ord" 2 VAL @m_rr_short_pd - VAL_scale_ord@ VAR serv_band_rep "Serving band reporting" 2 VAR sl2h "Short Layer 2 Header" 2 VAL @m_rr_short_pd - VAL_sl2h@ COMP emp "EM MEASUREMENT Parameters Description" { CSN1_S1 mr ; Multiband Reporting CSN1_S1 serv_band_rep ; Serving band reporting scale_ord ; Scale ord CSN1_S1 EXTERN @m_rr_com - report_900@ report_900 ; Reporting 900 CSN1_S1 EXTERN @m_rr_com - report_1800@ report_1800 ; Reporting 1800 CSN1_S1 EXTERN @m_rr_com - report_400@ report_400 ; Reporting 400 CSN1_S1 EXTERN @m_rr_com - report_1900@ report_1900 ; Reporting 1900 CSN1_S1 EXTERN @m_rr_com - report_850@ report_850 ; Reporting 850 } COMP i_bsic_i "Invalid BSIC Information" { ba_start_bsic ; BA List Index bsic ; BSIC rxlev ; GSM Reporting Quantity } COMP mi_ext "MI 2G Extension" { e_len ; Extension Length extens [e_len..MAX_2GEXT] ; Extension } COMP scdata "Serving Cell Data" { dtx_used ; DTX Used rxlev ; RX Level rxqual_full ; RX Quality Full mean_bep ; Mean BEP cv_bep ; Coefficient of Variation of BEP nr_rcvd_bl ; Number Of Received Blocks } COMP rep_q_arr "Structured Element" { CSN1_S1 rep_q ; reported quantity, present only if reported } COMP em_rep "EM Bitmap Type Reporting" { rep_q_arr [0..MAX_NNC] ; Reporting Quantities } MSG u_emr uplink 0b000100 ; Enhanced Measurement Report { GSM3_V msg_type ; Message Type GSM3_V sl2h ; Short Layer 2 Header GSM3_V ba_ind ; BA Sequence Number indication GSM3_V ba_ind_3g ; 3G BA Sequence Number indication GSM3_V bsic_seen ; BSIC Seen GSM3_V scale ; Scale CSN1_S1 scdata ; Serving Cell Data CSN1_S1 i_bsic_i [0..MAX_BSICI] ; Invalid BSIC Information CSN1_S1 em_rep ; EM Bitmap Type Reporting S_PADDING .00101011 (21) ; Spare Padding } MSG d_meas_inf downlink 0b000101 ; Measurement Information { GSM3_V msg_type ; Message Type GSM3_V sl2h ; Short Layer 2 Header GSM3_V ba_ind ; BA Sequence Number indication GSM3_V ba_ind_3g ; 3G BA Sequence Number indication GSM3_V mp_cm ; Measurement parameters change mark GSM3_V mi_idx ; MI Index GSM3_V mi_c ; MI Counter GSM3_V pow_ctrl ; Power Control Indicator GSM3_V report_type ; Report Type GSM3_V rep_rate ; Reporting Rate GSM3_V inv_bsic_rep ; Invalid BSIC Reporting CSN1_S1 EXTERN @m_rr_com - rtdd@ rtdd ; GPRS Real Time Difference Description CSN1_S1 EXTERN @m_rr_com - gprs_bsic@ gprs_bsic ; GPRS BSIC Description CSN1_S1 EXTERN @m_rr_com - gprs_rep_prio@ gprs_rep_prio ; Report Priority CSN1_S1 emp ; EM Measurement Parameters Description CSN1_S1 mi_ext ; MI 2G Extension S_PADDING .00101011 (21) ; Spare Padding }