FreeCalypso > hg > fc-magnetite
view cdg-hybrid/sap/mmreg.pdf @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 02 Jan 2020 05:38:26 +0000 |
parents | e7a67accfad9 |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : mmreg.pdf ;*** Creation : Wed Mar 11 09:58:21 CST 2009 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : mmreg ;*** Document No. : 6147.100.96.110 ;*** Document Date : 2003-06-13 ;*** Document Status: BEING_PROCESSED ;*** Document Author: HM ;******************************************************************************** PRAGMA SRC_FILE_TIME "Thu Nov 29 09:46:52 2007" PRAGMA LAST_MODIFIED "2003-06-13" PRAGMA ID_AND_VERSION "6147.100.96.110" CONST MAX_PLMN_ID 12 ; The maximum number of different PLMN in some pimitives CONST MMR_MAX_TEXT_LEN 40 ; The maximum length of a PLMN's name in MMGMM_INFO_IND CONST SIZE_MCC 3 ; The number of MCC digits CONST SIZE_MNC 3 ; The number of MNC digits EXTERN CONST @p_gsmcom - MM_ORIGINATING_ENTITY@ MM_ORIGINATING_ENTITY ; Used in cause values to mark MM as the cause originating entity VALTAB VAL_detach_cause VAL 0 CS_SIM_REM "Consider SIM as removed or not valid" VAL 1 CS_POW_OFF "Power off and delete SIM data" VAL 2 CS_SOFT_OFF "Power off and keep SIM data" VALTAB VAL_mode VAL 0 MODE_AUTO "automatic mode" VAL 1 MODE_MAN "manual mode" VALTAB VAL_service VAL 0 NREG_NO_SERVICE "no service available" VAL 1 NREG_LIMITED_SERVICE "limited service available" VALTAB VAL_forb_ind VAL 0 FORB_PLMN_NOT_INCLUDED "Not member of the forbidden PLMN list" VAL 1 FORB_PLMN_INCLUDED "Member of the forbidden PLMN list" VALTAB VAL_search_running VAL 0 SEARCH_NOT_RUNNING "Network search not running anymore" VAL 1 SEARCH_RUNNING "Network search still running" VALTAB VAL_tz VAL 0 TIMEZONE_GMT "GMT" VAL 0x40 TIMEZONE_GMT_PLS_1HR "GMT + 1 hour" VAL 0x80 TIMEZONE_GMT_PLS_2HR "GMT + 2 hours" VAL 0x48 TIMEZONE_GMT_MIN_1HR "GMT - 1 hour" VAL 0x88 TIMEZONE_GMT_MIN_2HR "GMT - 2 hours" VALTAB VAL_month VAL 1 - 12 "month" VALTAB VAL_second VAL 0 - 59 "second" VALTAB VAL_minute VAL 0 - 59 "minute" VALTAB VAL_hour VAL 0 - 23 "hour" VALTAB VAL_day VAL 1 - 31 "day" VALTAB VAL_year VAL 0 - 99 "year" VALTAB VAL_daylight_save_time %REL99% VAL 0 MMR_ADJ_NO "No adjustment for Daylight Saving Time" VAL 1 MMR_TIME_ADJ_1 "+1 hour adjustment for Daylight Saving Time" VAL 2 MMR_TIME_ADJ_2 "+2 hours adjustment for Daylight Saving Time" VALTAB VAL_service_mode VAL 0 SERVICE_MODE_LIMITED "Search for limited service required" VAL 1 SERVICE_MODE_FULL "Search for full service required" VALTAB VAL_cause VAL 0x0402 MMCS_IMSI_IN_HLR "IMSI unknown in HLR" VAL 0x0403 MMCS_ILLEGAL_MS "Illegal MS" VAL 0x0404 MMCS_IMSI_IN_VLR "IMSI unknown in VLR" VAL 0x0405 MMCS_IMEI_NOT_ACCEPTED "IMEI not accepted" VAL 0x0406 MMCS_ILLEGAL_ME "Illegal ME" VAL 0x040B MMCS_PLMN_NOT_ALLOWED "PLMN not allowed" VAL 0x040C MMCS_LA_NOT_ALLOWED "Location Area not allowed" VAL 0x040D MMCS_ROAMING_NOT_ALLOWED "Roaming not allowed in this location area" VAL 0x040F MMCS_NO_SUITABLE_CELL_IN_LA "Find another allowed location area in the same PLMN" VAL 0x0411 MMCS_NETWORK_FAILURE "Network failure" VAL 0x0416 MMCS_CONGESTION "Congestion" VAL 0x0420 MMCS_SERVICE_NOT_SUPPORTED "Service option not supported" VAL 0x0421 MMCS_SERVICE_NOT_SUBSCRIBED "Requested service option not subscribed" VAL 0x0422 MMCS_SERVICE_ORDER "Service option temporarily out of order" VAL 0x0426 MMCS_IDENTIFIY "Call cannot be identified" VAL 0x0430 MMCS_RETRY_IN_NEW_CELL "retry upon entry into a new cell (mapped 0x0430..0x043f -> 0x0430)" VAL 0x045F MMCS_INCORRECT_MESSAGE "Semantically incorrect message" VAL 0x0460 MMCS_INVALID_MAND_MESSAGE "Invalid mandatory information" VAL 0x0461 MMCS_MESSAGE_TYPE_NOT_IMPLEM "Message type non-existent or not implemented" VAL 0x0462 MMCS_MESSAGE_TYPE_INCOMPAT "Message type not compatible with the protocol state" VAL 0x0463 MMCS_IE_NOT_IMPLEM "Information element non-existent or not implemented" VAL 0x0464 MMCS_CONDITIONAL_IE "Conditional IE error" VAL 0x0465 MMCS_MESSAGE_INCOMPAT "Message not compatible with the protocol state" VAL 0x046F MMCS_UNSPECIFIED "Protocol error, unspecified" VAL 0xC400 MMCS_SUCCESS "No error, successful operation (MM)" VAL 0xC480 MMCS_NO_REGISTRATION "MS is not registered or deregistration started" VAL 0xC481 MMCS_TIMER_RECOVERY "time-out in MM during establishment" VAL 0xC482 MMCS_NO_REESTABLISH "Cell does not support call reestablishment" VAL 0xC483 MMCS_INT_PREEM "Preemptive release, e.g. MO-MT clash in MM" VAL 0xC484 MMCS_PLMN_NOT_IDLE_MODE "reject, not in idle mode (MMR_PLMN_IND)" VAL 0xC488 MMCS_AUTHENTICATION_REJECTED "AUTHENTICATION REJECT received" VAL 0xC489 MMCS_SIM_REMOVED "A valid SIM is not present" VAL 0xC4FF MMCS_INT_NOT_PRESENT "No error cause (MM)" VALTAB VAL_ciph VAL 0 CIPH_OFF "ciphering off" VAL 1 CIPH_ON "ciphering on" VALTAB VAL_bootup_act VAL 0 NORMAL_REG "Normal Registration" VAL 1 QUICK_REG "Fast Registration" VALTAB VAL_bootup_cause VAL 0 REG_END "end of registration" VAL 1 PWR_SCAN_START "power scanning started" VAR v_plmn "valid flag" B VAR mcc "mobile country code" B VAR mnc "mobile network code" B VAR detach_cause "cause" B VAL @p_mmreg - VAL_detach_cause@ VAR mode "registration mode" B VAL @p_mmreg - VAL_mode@ VAR service "service (either no or limited service)" B VAL @p_mmreg - VAL_service@ VAR forb_ind "Forbidden PLMN indicator" B VAL @p_mmreg - VAL_forb_ind@ VAR rxlevel "Fieldstrength" B VAR search_running "Search is still running" B VAL @p_mmreg - VAL_search_running@ VAR v_name "valid flag" B VAR dcs "data coding scheme" B VAR add_ci "add ci indicator" B VAR num_spare "num spare bits" B VAR text "name" B VAR v_tz "timezone valid" B VAR tz "timezone" B VAL @p_mmreg - VAL_tz@ VAR v_time "time valid" B VAR year "year" B VAL @p_mmreg - VAL_year@ VAR month "month" B VAL @p_mmreg - VAL_month@ VAR day "day" B VAL @p_mmreg - VAL_day@ VAR hour "hour" B VAL @p_mmreg - VAL_hour@ VAR minute "minute" B VAL @p_mmreg - VAL_minute@ VAR second "second" B VAL @p_mmreg - VAL_second@ VAR daylight_save_time %REL99% "Network daylight saving time" B VAL @p_mmreg - VAL_daylight_save_time@ VAR service_mode "Required service mode" B VAL @p_mmreg - VAL_service_mode@ VAR cause "Cause for loss of full service, release or error" S VAL @p_mmreg - VAL_cause@ VAR ciph "cipher mode" B VAL @p_mmreg - VAL_ciph@ VAR lac "location area code" S VAR cid "cell id" S VAR lac_list "LACs of found PLMNs" S VAR bootup_act "Bootup action" B VAL @p_mmreg - VAL_bootup_act@ VAR bootup_cause "bootup cause" B VAL @p_mmreg - VAL_bootup_cause@ COMP plmn "plmn identification" { v_plmn ; valid flag mcc [SIZE_MCC] ; mobile country code mnc [SIZE_MNC] ; mobile network code } TYPEDEF COMP plmn new_forb_plmn "plmn identification" TYPEDEF COMP plmn ahplmn "ahplmn identification" COMP full_name "Network name, long format" { v_name ; valid flag dcs ; data coding scheme add_ci ; add ci indicator num_spare ; num spare bits text [0..MMR_MAX_TEXT_LEN] ; name } TYPEDEF COMP full_name short_name "Network name, short format" COMP ntz "Network time zone" { v_tz ; timezone valid tz ; timezone } COMP time "Network time" { v_time ; time valid year ; year month ; month day ; day hour ; hour minute ; minute second ; second } ; MMR_REG_REQ 0x8000000A ; MMR_REG_CNF 0x8000400A ; MMR_NREG_IND 0x8001400A ; MMR_NREG_REQ 0x8001000A ; MMR_NREG_CNF 0x8002400A ; MMR_NET_REQ 0x8002000A ; MMR_PLMN_IND 0x8003400A ; MMR_PLMN_RES 0x8003000A ; MMR_PLMN_MODE_REQ 0x8004000A ; MMR_INFO_IND 0x8004400A ; MMR_CIPHERING_IND 0x8005400A ; MMR_AHPLMN_IND 0x8006400A PRIM MMR_REG_REQ 0x8000000A { service_mode ; registration mode bootup_act ; bootup action } PRIM MMR_REG_CNF 0x8000400A { plmn ; network identification lac ; Location area code cid ; Cell id bootup_cause ; bootup cause } PRIM MMR_NREG_IND 0x8001400A { service ; Negative registration service search_running ; Search running new_forb_plmn ; PLMN cause ; cause for loss of full service } PRIM MMR_NREG_REQ 0x8001000A { detach_cause ; cause } PRIM MMR_NREG_CNF 0x8002400A { detach_cause ; cause } PRIM MMR_NET_REQ 0x8002000A { } PRIM MMR_PLMN_IND 0x8003400A { cause ; network search result plmn [MAX_PLMN_ID] ; found plmns lac_list [MAX_PLMN_ID] ; List of LACs forb_ind [MAX_PLMN_ID] ; Forbidden PLMN rxlevel [MAX_PLMN_ID] ; Fieldstrength } PRIM MMR_PLMN_RES 0x8003000A { plmn ; selected plmn } PRIM MMR_PLMN_MODE_REQ 0x8004000A { mode ; selected mode } PRIM MMR_INFO_IND 0x8004400A { plmn ; Public Land Mobile Network full_name ; full network name short_name ; short network name ntz ; network time zone time ; network time daylight_save_time ; network daylight saving time } PRIM MMR_CIPHERING_IND 0x8005400A { ciph ; cipher mode } PRIM MMR_AHPLMN_IND 0x8006400A { ahplmn ; Primitive Item }