FreeCalypso > hg > fc-magnetite
view cdg211/cdginc/m_sat.val @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 02 Jan 2020 05:38:26 +0000 |
| parents | 56abf6cf8a0b |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : m_sat.val | | SOURCE : "__out__\g23m_dfile\msg\sat.mdf" | | LastModified : "2003-02-25" | | IdAndVersion : "6147.609.99.011" | | SrcFileTime : "Tue Nov 15 17:04:28 2005" | | Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:14 2007 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef M_SAT_VAL #define M_SAT_VAL #define CDG_ENTER__M_SAT_VAL #define CDG_ENTER__FILENAME _M_SAT_VAL #define CDG_ENTER__M_SAT_VAL__FILE_TYPE CDGINC #define CDG_ENTER__M_SAT_VAL__LAST_MODIFIED _2003_02_25 #define CDG_ENTER__M_SAT_VAL__ID_AND_VERSION _6147_609_99_011 #define CDG_ENTER__M_SAT_VAL__SRC_FILE_TIME _Tue_Nov_15_17_04_28_2005 #include "CDG_ENTER.h" #undef CDG_ENTER__M_SAT_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_cmd_typ */ #define SAT_CMD_REFRESH (0x1) /* Refresh command */ #define SAT_CMD_MORE_TIME (0x2) /* More time command */ #define SAT_CMD_POLL_INTERVAL (0x3) /* Poll interval command */ #define SAT_CMD_POLL_OFF (0x4) /* Polling off command */ #define SAT_CMD_EVENT_LIST (0x5) /* Setup event list command */ #define SAT_CMD_SETUP_CALL (0x10) /* Set up call command */ #define SAT_CMD_SEND_SS (0x11) /* Send SS command */ #define SAT_CMD_SEND_USSD (0x12) /* Send USSD Command */ #define SAT_CMD_SEND_SMS (0x13) /* Send Short Message command */ #define SAT_CMD_SEND_DTMF (0x14) /* Send DTMF command */ #define SAT_CMD_LAUNCH_BROWSER (0x15) /* Launch WWW Browser class c */ #define SAT_CMD_PLAY_TONE (0x20) /* Play tone command */ #define SAT_CMD_DISPLAY_TEXT (0x21) /* Display text command */ #define SAT_CMD_GET_INKEY (0x22) /* Get inkey command */ #define SAT_CMD_GET_INPUT (0x23) /* Get input command */ #define SAT_CMD_SEL_ITEM (0x24) /* Select item command */ #define SAT_CMD_SETUP_MENU (0x25) /* Set up menu command */ #define SAT_CMD_PROV_LOC_INFO (0x26) /* Provide loacal information command */ #define SAT_CMD_TIMER_MNG (0x27) /* Timer Managemant command */ #define SAT_CMD_IDLE_TEXT (0x28) /* Set up idle mode text command */ #define SAT_CMD_RUN_AT (0x34) /* Run AT command */ #define SAT_CMD_OPEN_CHANNEL (0x40) /* Open data channel for CS or GPRS class e */ #define SAT_CMD_CLOSE_CHANNEL (0x41) /* Close data channel class e */ #define SAT_CMD_RECEIVE_DATA (0x42) /* Receive data from ME from the channel class e */ #define SAT_CMD_SEND_DATA (0x43) /* Send the data to the channel via ME class e */ #define SAT_CMD_GET_CHANNEL_STATUS (0x44) /* Get the status of the data channel opened class e */ #define SAT_CMD_END_SESSION (0x81) /* End of proactive session command */ /* * Value constants for VAL_cmd_qlf */ #define QLF_RFSH_INIT (0x0) /* Refresh: SIM initialization */ #define QLF_RFSH_INIT_FULL_CHNG_NTFY (0x1) /* Refresh: SIM initialization and full file change notification */ #define QLF_RFSH_FILE_CHNG_NTFY (0x2) /* Refresh: File change notification */ #define QLF_RFSH_INIT_FILE_CHNG_NTFY (0x3) /* Refresh: SIM initialization and file change notification */ #define QLF_RFSH_RESET (0x4) /* Refresh: SIM reset */ #define QLF_CALL_IDLE (0x0) /* Set up call: idle */ #define QLF_CALL_IDLE_RDL (0x1) /* Set up call: idle with redial */ #define QLF_CALL_HOLD (0x2) /* Set up call: hold */ #define QLF_CALL_HOLD_RDL (0x3) /* Set up call: hold with redial */ #define QLF_CALL_DISC (0x4) /* Set up call: disconnect */ #define QLF_CALL_DISC_RDL (0x5) /* Set up call: disconnect with redial */ #define QLF_SMS_NO_PACK (0x0) /* Send SMS: packing not required */ #define QLF_SMS_PACK (0x1) /* Send SMS: packing required */ #define QLF_DISP_PRIO_NORM (0x0) /* Display text: normal priority */ #define QLF_DISP_PRIO_HIGH (0x1) /* Display text: high priority */ #define QLF_DISP_CLR_DELAY (0x0) /* Display text: clear message after delay */ #define QLF_DISP_CLR_USER (0x80) /* Display text: wait for user to clear message */ #define QLF_INKY_DIGITS (0x0) /* Get inkey: digits (0-9, *,# and +) only */ #define QLF_INKY_ALPHA (0x1) /* Get inkey: alphabet set */ #define QLF_INKY_SMS_DEF (0x0) /* Get inkey; SMS default alphabet */ #define QLF_INKY_UCS2 (0x2) /* Get inkey: UCS2 alphabet */ #define QLF_INKY_NO_HELP (0x0) /* Get inkey: no help information available */ #define QLF_INKY_HELP (0x80) /* Get inkey: help information available */ #define QLF_INPT_DIGITS (0x0) /* Get input: digits (0-9, *,# and +) only */ #define QLF_INPT_ALPHA (0x1) /* Get input: alphabet set */ #define QLF_INPT_SMS_DEF (0x0) /* Get input; SMS default alphabet */ #define QLF_INPT_UCS2 (0x2) /* Get input: UCS2 alphabet */ #define QLF_INPT_ECHO (0x0) /* Get input: ME may echo input */ #define QLF_INPT_NO_ECHO (0x4) /* Get input: input shall not revealed in any way */ #define QLF_INPT_NO_PACK (0x0) /* Get input: unpacket input format */ #define QLF_INPT_PACK (0x8) /* Get input: SMS packed input format */ #define QLF_INPT_NO_HELP (0x0) /* Get input: no help information available */ #define QLF_INPT_HELP (0x80) /* Get input: help information available */ #define QLF_SITM_NOPRES (0x0) /* Select item: presentation type is not specified */ #define QLF_SITM_PRES (0x1) /* Select item: presentation type is specified in bit 2 */ #define QLF_SITM_CHVAL (0x0) /* Select item: presentation as a choice of data values if bit 1 = '1' */ #define QLF_SITM_CHNAV (0x2) /* Select item: presentation as a choice of navigation options if bit 1 is '1' */ #define QLF_SITM_SEL_NOPREF (0x0) /* Select item: no selection preference */ #define QLF_SITM_SEL_PREF_SOFTKEY (0x4) /* Select item: selection using soft key preferred */ #define QLF_SITM_NO_HELP (0x0) /* Select item: no help information available */ #define QLF_SITM_HELP (0x80) /* Select item: help information available */ #define QLF_SMNU_SEL_NOPREF (0x0) /* Set up menu: no selection preference */ #define QLF_SMNU_SEL_PREF_SOFTKEY (0x1) /* Set up menu: selection using soft key preferred */ #define QLF_SMNU_NO_HELP (0x0) /* Set up menu: no help information available */ #define QLF_SMNU_HELP (0x80) /* Set up menu: help information available */ #define QLF_PLOI_LOC_INFO (0x0) /* Provide local information: Local information */ #define QLF_PLOI_IMEI (0x1) /* Provide local information: IMEI of ME */ #define QLF_PLOI_NTW_MSR (0x2) /* Provide local information: Network measurement results */ #define QLF_PLOI_DTT (0x3) /* Provide local information: Date, Time and Timezone */ #define QLF_PLOI_LANG_SET (0x4) /* Provide local information: Language Setting */ #define QLF_PLOI_TIM_ADV (0x5) /* Provide local information: Timing Advance */ #define QLF_LABR_IF_NOT_LCHD (0x0) /* Launch Browser: launch browser, if not already launched */ #define QLF_LABR_NOT_USED1 (0x2) /* Launch Browser: not used */ #define QLF_LABR_USE_EXISTING (0x2) /* Launch Browser: use the existing browser */ #define QLF_LABR_CLOSE_AND_NEW (0x3) /* Launch Browser: close the existing browser session and launch new browser session */ #define QLF_LABR_NOT_USED2 (0x4) /* Launch Browser: not used */ #define QLF_OPCH_ON_DEMD_LINK_EST (0x0) /* Open Channel: on demand link establishment (class e) */ #define QLF_OPCH_IMMDT_LINK_EST (0x1) /* Open Channel: immediate link establishment (class e) */ #define QLF_OPCH_NO_AUTO_RECONNECT (0x0) /* Open Channel: no automatic reconnection (class e) */ #define QLF_OPCH_AUTO_RECONNECT (0x2) /* Open Channel: automatic reconnection (class e) */ #define QLF_SNDDAT_TX (0x0) /* Send Data: store data in Tx buffer (class e) */ #define QLF_SNDDAT_IM (0x1) /* Send Data: Send data immediately (class e) */ /* * Value constants for VAL_src_dev */ #define DEV_SRC_KBD (0x1) /* Device keypad */ #define DEV_SRC_DSP (0x2) /* Device display */ #define DEV_SRC_EAR (0x3) /* Device earpiece */ #define DEV_SRC_CDR0 (0x10) /* Device Additional Card Reader 0 */ #define DEV_SRC_CDR1 (0x11) /* Device Additional Card Reader 1 */ #define DEV_SRC_CDR2 (0x12) /* Device Additional Card Reader 2 */ #define DEV_SRC_CDR3 (0x13) /* Device Additional Card Reader 3 */ #define DEV_SRC_CDR4 (0x14) /* Device Additional Card Reader 4 */ #define DEV_SRC_CDR5 (0x15) /* Device Additional Card Reader 5 */ #define DEV_SRC_CDR6 (0x16) /* Device Additional Card Reader 6 */ #define DEV_SRC_CDR7 (0x17) /* Device Additional Card Reader 7 */ #define DEV_SRC_CH1 (0x21) /* Device Channel 1 (class e) */ #define DEV_SRC_CH2 (0x22) /* Device Channel 2 (class e) */ #define DEV_SRC_CH3 (0x23) /* Device Channel 3 (class e) */ #define DEV_SRC_CH4 (0x24) /* Device Channel 4 (class e) */ #define DEV_SRC_CH5 (0x25) /* Device Channel 5 (class e) */ #define DEV_SRC_CH6 (0x26) /* Device Channel 6 (class e) */ #define DEV_SRC_CH7 (0x27) /* Device Channel 7 (class e) */ #define DEV_SRC_SIM (0x81) /* Device SIM */ #define DEV_SRC_ME (0x82) /* Device mobile equipment */ #define DEV_SRC_NTW (0x83) /* Device network */ /* * Value constants for VAL_dest_dev */ #define DEV_DST_KBD (0x1) /* Device keypad */ #define DEV_DST_DSP (0x2) /* Device display */ #define DEV_DST_EAR (0x3) /* Device earpiece */ #define DEV_DST_CDR0 (0x10) /* Device Additional Card Reader 0 */ #define DEV_DST_CDR1 (0x11) /* Device Additional Card Reader 1 */ #define DEV_DST_CDR2 (0x12) /* Device Additional Card Reader 2 */ #define DEV_DST_CDR3 (0x13) /* Device Additional Card Reader 3 */ #define DEV_DST_CDR4 (0x14) /* Device Additional Card Reader 4 */ #define DEV_DST_CDR5 (0x15) /* Device Additional Card Reader 5 */ #define DEV_DST_CDR6 (0x16) /* Device Additional Card Reader 6 */ #define DEV_DST_CDR7 (0x17) /* Device Additional Card Reader 7 */ #define DEV_DST_CH1 (0x21) /* Device Channel 1 (class e) */ #define DEV_DST_CH2 (0x22) /* Device Channel 2 (class e) */ #define DEV_DST_CH3 (0x23) /* Device Channel 3 (class e) */ #define DEV_DST_CH4 (0x24) /* Device Channel 4 (class e) */ #define DEV_DST_CH5 (0x25) /* Device Channel 5 (class e) */ #define DEV_DST_CH6 (0x26) /* Device Channel 6 (class e) */ #define DEV_DST_CH7 (0x27) /* Device Channel 7 (class e) */ #define DEV_DST_SIM (0x81) /* Device SIM */ #define DEV_DST_ME (0x82) /* Device mobile equipment */ #define DEV_DST_NTW (0x83) /* Device network */ /* * Value constants for VAL_time_unit */ #define TU_MIN (0x0) /* Minutes */ #define TU_SEC (0x1) /* Seconds */ #define TU_100_MSEC (0x2) /* Tenth of seconds */ /* * Value constants for VAL_noa */ #define VAL_NOA___DEF (0x0) /* Reserved */ #define NOA_UNKNOWN (0x0) /* unknown */ #define NOA_INTER_NUM (0x1) /* international number */ #define NOA_NATIO_NUM (0x2) /* national significant number */ #define NOA_NETW_NUM (0x3) /* network specific number */ #define NOA_SUBSC_NUM (0x4) /* subscriber number */ #define NOA_ABBRV_NUM (0x6) /* abbreviated number */ /* * Value constants for VAL_npi */ #define VAL_NPI___DEF (0x0) /* reserved */ #define NPI_UNKNOWN (0x0) /* unknown */ #define NPI_ISDN (0x1) /* ISDN/Telephony Numbering Plan (Rec CCITT E.164) */ #define NPI_X121 (0x3) /* data numbering plan (CCITT Rec X.121) */ #define NPI_F69 (0x4) /* telex numbering plan (CCITT Rec F.69) */ #define NPI_LAND_MOBILE (0x6) /* land mobile numbering plan (CCITT Rec E.212) */ #define NPI_NATIONAL (0x8) /* land mobile numbering plan (CCITT Rec E.212) */ #define NPI_PRIVATE (0x9) /* Private numbering plan */ /* * Value constants for VAL_gen */ #define RSLT_PERF_SUCCESS (0x0) /* Command performed successfully */ #define RSLT_PERF_PART_CMPR (0x1) /* Command performed with partial comprehension */ #define RSLT_PERF_MISS_INFO (0x2) /* Command performed with missing information */ #define RSLT_RFSH_ADD_EF (0x3) /* Refresh performed with additional EF read */ #define RSLT_PERF_MDFY_SIM (0x5) /* Command performed but modified by SIM */ #define RSLT_PERF_LIM_SRV (0x6) /* Command performed successfully, limited service */ #define RSLT_PERF_MDFIED (0x7) /* Command performed with modification (class e) */ #define RSLT_SESS_USR_TERM (0x10) /* Proactive SIM session terminated by user */ #define RSLT_SESS_USR_BACK (0x11) /* Backward move in proactive SIM session */ #define RSLT_NO_RESP (0x12) /* No response from user */ #define RSLT_HELP_USR_REQ (0x13) /* Help information required by user */ #define RSLT_USER_TERM_SS (0x14) /* SS or USSD transaction terminated by user */ #define RSLT_ME_UNAB_PROC (0x20) /* ME is unable to process command */ #define RSLT_NTW_UNAB_PROC (0x21) /* Network is unable to process command */ #define RSLT_USR_REJ (0x22) /* User did not accept set up request */ #define RSLT_USR_CLR_DWN (0x23) /* User cleared down call before connection or network release */ #define RSLT_CC_SIM_TMP (0x25) /* Interaction with call control by SIM temporary problem */ #define RSLT_LABRWS_GENERIC (0x26) /* Launch browser generic error code (class e) */ #define RSLT_ME_CAP (0x30) /* Command beyond ME capabilities */ #define RSLT_UNKN_TYPE (0x31) /* Command type not understood */ #define RSLT_UNKN_DATA (0x32) /* Command data not understood */ #define RSLT_UNKN_NR (0x33) /* Command number not understood */ #define RSLT_SS_ERR (0x34) /* SS return error */ #define RSLT_SMS_ERR (0x35) /* SMS RP-ERROR */ #define RSLT_ERR_REQ_VAL (0x36) /* Error, required values are missing */ #define RSLT_USSD_ERR (0x37) /* USSD return error */ #define RSLT_CC_SIM_PRM (0x39) /* interaction with call control by SIM or SMS control by SIM permanent problem */ #define RSLT_BEARIND_PERR (0x3a) /* Bearer Independent Protocol error (class e) */ /* * Value constants for VAL_add */ #define ADD_NO_CAUSE (0x0) /* No specific cause can be given */ #define ADD_ME_SCR_BUSY (0x1) /* ME: Screen is busy */ #define ADD_ME_CALL_BUSY (0x2) /* ME: currently busy on call */ #define ADD_ME_SS_BUSY (0x3) /* ME: currently busy on SS transaction */ #define ADD_ME_NO_SERV (0x4) /* ME: no service */ #define ADD_ME_ACC_BAR (0x5) /* ME: Access control class bar */ #define ADD_ME_RR_DENIED (0x6) /* ME: Radio resource not granted */ #define ADD_ME_NO_SPCH_CALL (0x7) /* ME: Not in speech call */ #define ADD_ME_USSD_BUSY (0x8) /* ME: currently busy on USSD transaction */ #define ADD_CC_NOT_ALLWD (0x1) /* Call Control: Action not allowed */ #define ADD_CC_REQ_CHNG (0x2) /* Call Control: Type of request has changed */ #define ADD_LBP_BEARR_NAVAIL (0x1) /* Launch browser: Bearer unavailable (class c) */ #define ADD_LBP_BRWSR_NAVAIL (0x2) /* Launch browser: Browser unavailable (class c) */ #define ADD_LBP_ME_UNABL_RDPD (0x3) /* Launch browser: ME unable to read provisioning data (class c) */ #define ADD_BIP_NO_CHAN_AVAIL (0x1) /* No channel available (class e) */ #define ADD_BIP_CHAN_CLOSD (0x2) /* Channel closed (class e) */ #define ADD_BIP_CHANID_NT_VLD (0x3) /* Channel identifier not valid (class e) */ #define ADD_BIP_BUF_SIZ_NAVAIL (0x4) /* Requested buffer size not available (class e) */ #define ADD_BIP_SECUR_ERR (0x5) /* Security error (unsuccessful authentication) (class e) */ #define ADD_BIP_SIME_ITL_NAVAIL (0x6) /* Requested SIM/ME interface transport level not available (class e) */ /* * Value constants for VAL_tos */ #define VAL_TOS___DEF (0x0) /* Reserved */ #define TOS_X213 (0x0) /* NSAP (X.213/ISO 8348 AD2) */ #define TOS_USER (0x2) /* User Specified */ /* * Value constants for VAL_oei */ #define OEI_EVEN (0x0) /* even number of address signals */ #define OEI_ODD (0x1) /* odd number of address signals */ /* * Value constants for VAL_event */ #define VAL_EVENT___DEF (0x0) /* Reserved */ #define EVENT_MT_CALL (0x0) /* Incoming Call */ #define EVENT_CALL_CONN (0x1) /* Call is connected */ #define EVENT_CALL_DISC (0x2) /* Call is disconnected */ #define EVENT_LOC_STATUS (0x3) /* Service status change */ #define EVENT_USER_ACTIVE (0x4) /* User activity */ #define EVENT_IDLE_SCREEN (0x5) /* Idle screen is available */ #define EVENT_BROWS_TERMIN (0x8) /* Browser Termination (if class c supported) */ #define EVENT_DATA_AVAIL (0x9) /* Data available (if class e supported) */ #define EVENT_CHAN_STAT (0xa) /* Channel Status (if class e supported) */ /* * Value constants for VAL_bc_rpi */ #define VAL_BC_RPI___DEF (0x0) /* Reserved */ #define BC_RPI_ALT (0x1) /* Alternate mode */ #define BC_RPI_SEQ (0x3) /* Sequential mode */ /* * Value constants for VAL_loc_state */ #define VAL_LOC_STATE___DEF (0x0) /* Reserved */ #define LOC_ST_NORMAL (0x1) /* Normal service */ #define LOC_ST_LIMITED (0x2) /* Limited service */ #define LOC_ST_NOSERV (0x3) /* No service */ /* * Value constants for VAL_gprs_pdp_type */ #define PDP_TYPE_IP (0x2) /* Internet Protocol, IETF STD 5 */ /* * Value constants for VAL_oth_addr_type */ #define VAL_OTH_ADDR_TYPE___DEF (0x0) /* reserved */ #define IPv4 (0x21) /* Internet Protocal vers.4 */ #define IPv6 (0x57) /* Internet Protocal vers.6 */ /* * Value constants for VAL_trans_prot_type */ #define VAL_TRANS_PROT_TYPE___DEF (0x0) /* reserved */ #define UDP (0x1) /* User Datagramm Protocol */ #define TCP (0x2) /* Transmission Control Protocol */ /* * Value constants for VAL_browser */ #define VAL_BROWSER___DEF (0x0) /* reserved */ #define DEFAULT_BROWSER (0x0) /* Default browser usage */ /* * Value constants for VAL_bearer */ #define VAL_BEARER___DEF (0x0) /* reserved */ #define B_SMS (0x0) /* short message service */ #define B_CSD (0x1) /* circle switched data */ #define B_USSD (0x2) /* unstructured supplementary service data */ #define B_GPRS (0x3) /* generel packet radio systeme */ /* * Value constants for VAL_brows_term_s */ #define USER_TERMINATION (0x0) /* terminated by user action */ #define ERROR_TERMINATION (0x1) /* terminated by error */ /* * Value constants for VAL_chan_id */ #define NO_CHAN_AVAIL (0x0) #define CHANNEL_ID_1 (0x1) #define CHANNEL_ID_2 (0x2) #define CHANNEL_ID_3 (0x3) #define CHANNEL_ID_4 (0x4) #define CHANNEL_ID_5 (0x5) #define CHANNEL_ID_6 (0x6) #define CHANNEL_ID_7 (0x7) /* * Value constants for VAL_chan_stat_inf1 */ #define VAL_CHAN_STAT_INF1___DEF (0x0) /* reserved */ /* * Value constants for VAL_chan_stat_link */ #define LINK_NO_ESTABL (0x0) /* link not established or PDP context not activated */ #define LINK_ESTABL (0x1) /* link established or PDP context activated */ /* * Value constants for VAL_chan_stat_inf2 */ #define VAL_CHAN_STAT_INF2___DEF (0x0) /* reserved */ #define NO_FURTH_INFO (0x0) /* no further info can be given */ #define VAL_CHAN_STAT_INF2___1 (0x1) /* reserved */ #define VAL_CHAN_STAT_INF2___2 (0x2) /* reserved */ #define VAL_CHAN_STAT_INF2___3 (0x3) /* reserved */ #define VAL_CHAN_STAT_INF2___4 (0x4) /* reserved */ #define LINK_DROPPED (0x5) /* link dropped */ /* * Value constants for VAL_bear_type */ #define BT_CSD (0x1) /* bearer type CSD */ #define BT_GPRS (0x2) /* bearer type GPRS */ #define BT_DEFAULT (0x3) /* default bearer parameters */ /* * user defined constants */ #define MAX_PARTY_NUM_SAT (0x1e0) #define MAX_SUBADDR_NUM (0x14) #define MAX_CH_DATA_LEN (0xf1) #define MAX_CMD_AT_LEN (0xf1) #define MAX_ALPHA_ID_LEN (0xf1) #define MAX_SS_STRING_LEN (0x3c) #define MAX_SAT_USSD_LEN (0xa0) #define MAX_SMS_DIGIT_LEN (0x14) #define MAX_SMS_TPDU_LEN (0xb8) #define MAX_CAP_CNF_LEN (0x70) #define MAX_TEXT_LEN (0xa0) #define MAX_EVENT_LIST_LEN (0xa) #define MAX_TI_LEN (0x10) #define MAX_DTMF_LEN (0x50) #define MAX_PROV_F_PATH_LEN (0x10) #define MAX_BEARER_LIST_LEN (0xfd) #define MAX_CAUSE_LEN (0x1e) #define CCR_ALLW_NO_MDFY (0x0) #define CCR_NOT_ALLW (0x1) #define CCR_ALLW_WITH_MDFY (0x2) #define MAX_SAT_APN_LEN (0x66) #define MAX_URL_LEN (0xfd) #define MAX_PFP_ELEM (0xa) #include "CDG_LEAVE.h" #endif