FreeCalypso > hg > fc-magnetite
view cdg211/cdginc/p_dti.h @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 02 Jan 2020 05:38:26 +0000 |
| parents | 56abf6cf8a0b |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_dti.h | | SOURCE : "__out__\g23m_dfile\prim\dti.pdf" | | LastModified : "2000-06-29" | | IdAndVersion : "8411.110.00.007" | | SrcFileTime : "Mon Nov 24 15:50:28 2003" | | Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:15 2007 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_DTI_H #define P_DTI_H #define CDG_ENTER__P_DTI_H #define CDG_ENTER__FILENAME _P_DTI_H #define CDG_ENTER__P_DTI_H__FILE_TYPE CDGINC #define CDG_ENTER__P_DTI_H__LAST_MODIFIED _2000_06_29 #define CDG_ENTER__P_DTI_H__ID_AND_VERSION _8411_110_00_007 #define CDG_ENTER__P_DTI_H__SRC_FILE_TIME _Mon_Nov_24_15_50_28_2003 #include "CDG_ENTER.h" #undef CDG_ENTER__P_DTI_H #undef CDG_ENTER__FILENAME #include "p_dti.val" /* * End of substructure section, begin of primitive definition section */ #ifndef __T_DTI_READY_IND__ #define __T_DTI_READY_IND__ /* * * CCDGEN:WriteStruct_Count==1022 */ typedef struct { U16 tui; /*< 0: 2> transmission unit identifier */ U8 c_id; /*< 2: 1> channel identifier */ U8 op_ack; /*< 3: 1> operation mode */ } T_DTI_READY_IND; #endif #ifndef __T_DTI_GETDATA_REQ__ #define __T_DTI_GETDATA_REQ__ /* * * CCDGEN:WriteStruct_Count==1023 */ typedef struct { U16 tui; /*< 0: 2> transmission unit identifier */ U8 c_id; /*< 2: 1> channel identifier */ U8 op_ack; /*< 3: 1> operation mode */ } T_DTI_GETDATA_REQ; #endif #ifndef __T_DTI_DATA_REQ__ #define __T_DTI_DATA_REQ__ /* * * CCDGEN:WriteStruct_Count==1024 */ typedef struct { U16 tui; /*< 0: 2> transmission unit identifier */ U8 c_id; /*< 2: 1> channel identifier */ U8 p_id; /*< 3: 1> protocol identifier */ U8 op_ack; /*< 4: 1> operation mode */ U8 st_flow; /*< 5: 1> flow control state */ U8 st_line_sa; /*< 6: 1> line state sa */ U8 st_line_sb; /*< 7: 1> line state sb */ U8 st_escape; /*< 8: 1> escape state */ U8 _align0; /*< 9: 1> alignment */ U8 _align1; /*< 10: 1> alignment */ U8 _align2; /*< 11: 1> alignment */ T_desc_list desc_list; /*< 12: ? > list of generic data descriptors */ } T_DTI_DATA_REQ; #endif #ifndef __T_DTI_DATA_IND__ #define __T_DTI_DATA_IND__ /* * * CCDGEN:WriteStruct_Count==1025 */ typedef struct { U16 tui; /*< 0: 2> transmission unit identifier */ U8 c_id; /*< 2: 1> channel identifier */ U8 p_id; /*< 3: 1> protocol identifier */ U8 op_ack; /*< 4: 1> operation mode */ U8 st_flow; /*< 5: 1> flow control state */ U8 st_line_sa; /*< 6: 1> line state sa */ U8 st_line_sb; /*< 7: 1> line state sb */ U8 st_escape; /*< 8: 1> escape state */ U8 _align0; /*< 9: 1> alignment */ U8 _align1; /*< 10: 1> alignment */ U8 _align2; /*< 11: 1> alignment */ T_desc_list desc_list; /*< 12: ? > list of generic data descriptors */ } T_DTI_DATA_IND; #endif #ifndef __T_DTI_DATA_TEST_REQ__ #define __T_DTI_DATA_TEST_REQ__ /* * * CCDGEN:WriteStruct_Count==1026 */ typedef struct { U16 tui; /*< 0: 2> transmission unit identifier */ U8 c_id; /*< 2: 1> channel identifier */ U8 p_id; /*< 3: 1> protocol identifier */ U8 op_ack; /*< 4: 1> operation mode */ U8 st_flow; /*< 5: 1> flow control state */ U8 st_line_sa; /*< 6: 1> line state sa */ U8 st_line_sb; /*< 7: 1> line state sb */ U8 st_escape; /*< 8: 1> escape state */ U8 _align0; /*< 9: 1> alignment */ U8 _align1; /*< 10: 1> alignment */ U8 _align2; /*< 11: 1> alignment */ T_sdu sdu; /*< 12: ? > test data */ } T_DTI_DATA_TEST_REQ; #endif #ifndef __T_DTI_DATA_TEST_IND__ #define __T_DTI_DATA_TEST_IND__ /* * * CCDGEN:WriteStruct_Count==1027 */ typedef struct { U16 tui; /*< 0: 2> transmission unit identifier */ U8 c_id; /*< 2: 1> channel identifier */ U8 p_id; /*< 3: 1> protocol identifier */ U8 op_ack; /*< 4: 1> operation mode */ U8 st_flow; /*< 5: 1> flow control state */ U8 st_line_sa; /*< 6: 1> line state sa */ U8 st_line_sb; /*< 7: 1> line state sb */ U8 st_escape; /*< 8: 1> escape state */ U8 _align0; /*< 9: 1> alignment */ U8 _align1; /*< 10: 1> alignment */ U8 _align2; /*< 11: 1> alignment */ T_sdu sdu; /*< 12: ? > test data */ } T_DTI_DATA_TEST_IND; #endif #ifndef __T_DTI_DUMMY_REQ__ #define __T_DTI_DUMMY_REQ__ /* * * CCDGEN:WriteStruct_Count==1028 */ typedef struct { T_desc desc; /*< 0: ? > generic data descriptor */ } T_DTI_DUMMY_REQ; #endif #include "CDG_LEAVE.h" #endif