view cdg211/cdginc/p_grlc.val @ 629:3231dd9b38c1

armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 56abf6cf8a0b
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_grlc.val                                                     |
| SOURCE  : "__out__\g23m_dfile\prim\grlc.pdf"                             |
| LastModified : "2003-06-06"                                              |
| IdAndVersion : "8010.126.02.009"                                         |
| SrcFileTime  : "Thu Jul 15 16:12:04 2004"                                |
| Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:15 2007                    |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : GRLC
 * COMPATIBILITY_DEFINES  : NO
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_GRLC_VAL
#define P_GRLC_VAL


#define CDG_ENTER__P_GRLC_VAL

#define CDG_ENTER__FILENAME _P_GRLC_VAL
#define CDG_ENTER__P_GRLC_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_GRLC_VAL__LAST_MODIFIED _2003_06_06
#define CDG_ENTER__P_GRLC_VAL__ID_AND_VERSION _8010_126_02_009

#define CDG_ENTER__P_GRLC_VAL__SRC_FILE_TIME _Thu_Jul_15_16_12_04_2004

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_GRLC_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_sapi
 */
#define GRLC_SAPI_1                    (0x1)      /* SAP for GMM                    */
#define GRLC_SAPI_3                    (0x3)      /* SAP 1 for SNDCP                */
#define GRLC_SAPI_5                    (0x5)      /* SAP 2 for SNDCP                */
#define GRLC_SAPI_7                    (0x7)      /* SAP for SMS                    */
#define GRLC_SAPI_9                    (0x9)      /* SAP 3 for SNDCP                */
#define GRLC_SAPI_11                   (0xb)      /* SAP 4 for SNDCP                */
#define GRLC_SAPI_TEST_MODE            (0xff)     /* This signs a primitive as GRLC-self generated for test purposes */

/*
 * Value constants for VAL_peak
 */
#define GRLC_PEAK_SUB                  (0x0)      /* Subscribed peak throughput     */
#define GRLC_PEAK_1K                   (0x1)      /* Up to 1 000 octet/s            */
#define GRLC_PEAK_2K                   (0x2)      /* Up to 2 000 octet/s            */
#define GRLC_PEAK_4K                   (0x3)      /* Up to 4 000 octet/s            */
#define GRLC_PEAK_8K                   (0x4)      /* Up to 8 000 octet/s            */
#define GRLC_PEAK_16K                  (0x5)      /* Up to 16 000 octet/s           */
#define GRLC_PEAK_32K                  (0x6)      /* Up to 32 000 octet/s           */
#define GRLC_PEAK_64K                  (0x7)      /* Up to 64 000 octet/s           */
#define GRLC_PEAK_128K                 (0x8)      /* Up to 128 000 octet/s          */
#define GRLC_PEAK_256K                 (0x9)      /* Up to 256 000 octet/s          */

/*
 * Value constants for VAL_relclass
 */
#define GRLC_RELCLASS_SUB              (0x0)      /* Subscribed reliability class   */
#define GRLC_GTP_LLC_RLC_PROT          (0x1)      /* Acknowledged GTP, LLC, and RLC; Protected data */
#define GRLC_LLC_RLC_PROT              (0x2)      /* Unacknowledged GTP; Acknowledged LLC and RLC, Protected data */
#define GRLC_RLC_PROT                  (0x3)      /* Unacknowledged GTP and LLC; Acknowledged RLC, Protected data */
#define GRLC_PROT                      (0x4)      /* Unacknowledged GTP, LLC, and RLC, Protected data */
#define GRLC_NO_REL                    (0x5)      /* Unacknowledged GTP, LLC, and RLC, Unprotected data */

/*
 * Value constants for VAL_delay
 */
#define GRLC_DELAY_SUB                 (0x0)      /* Subscribed delay class         */
#define GRLC_DELAY_1                   (0x1)      /* Delay class 1                  */
#define GRLC_DELAY_2                   (0x2)      /* Delay class 2                  */
#define GRLC_DELAY_3                   (0x3)      /* Delay class 3                  */
#define GRLC_DELAY_4                   (0x4)      /* Delay class 4 (best effort)    */

/*
 * Value constants for VAL_mean
 */
#define GRLC_MEAN_SUB                  (0x0)      /* Subscribed mean throughput     */
#define GRLC_MEAN_100                  (0x1)      /* 100 octet/h                    */
#define GRLC_MEAN_200                  (0x2)      /* 200 octet/h                    */
#define GRLC_MEAN_500                  (0x3)      /* 500 octet/h                    */
#define GRLC_MEAN_1K                   (0x4)      /* 1 000 octet/h                  */
#define GRLC_MEAN_2K                   (0x5)      /* 2 000 octet/h                  */
#define GRLC_MEAN_5K                   (0x6)      /* 5 000 octet/h                  */
#define GRLC_MEAN_10K                  (0x7)      /* 10 000 octet/h                 */
#define GRLC_MEAN_20K                  (0x8)      /* 20 000 octet/h                 */
#define GRLC_MEAN_50K                  (0x9)      /* 50 000 octet/h                 */
#define GRLC_MEAN_100K                 (0xa)      /* 100 000 octet/h                */
#define GRLC_MEAN_200K                 (0xb)      /* 200 000 octet/h                */
#define GRLC_MEAN_500K                 (0xc)      /* 500 000 octet/h                */
#define GRLC_MEAN_1M                   (0xd)      /* 1 000 000 octet/h              */
#define GRLC_MEAN_2M                   (0xe)      /* 2 000 000 octet/h              */
#define GRLC_MEAN_5M                   (0xf)      /* 5 000 000 octet/h              */
#define GRLC_MEAN_10M                  (0x10)     /* 10 000 000 octet/h             */
#define GRLC_MEAN_20M                  (0x11)     /* 20 000 000 octet/h             */
#define GRLC_MEAN_50M                  (0x12)     /* 50 000 000 octet/h             */
#define GRLC_MEAN_BEST                 (0x1f)     /* Best effort                    */

/*
 * Value constants for VAL_preced
 */
#define GRLC_PRECED_SUB                (0x0)      /* Subscribed precedence          */
#define GRLC_PRIO_HIGH                 (0x1)      /* High priority                  */
#define GRLC_PRIO_NORM                 (0x2)      /* Normal priority                */
#define GRLC_PRIO_LOW                  (0x3)      /* Low priority                   */

/*
 * Value constants for VAL_radio_prio
 */
#define GRLC_RADIO_PRIO_1              (0x0)      /* Radio Priority Level 1 (highest) */
#define GRLC_RADIO_PRIO_2              (0x1)      /* Radio Priority Level 2         */
#define GRLC_RADIO_PRIO_3              (0x2)      /* Radio Priority Level 3         */
#define GRLC_RADIO_PRIO_4              (0x3)      /* Radio Priority Level 4 (lowest) */

/*
 * Value constants for VAL_cause
 */
#define GRLC_DTACS_DEF                 (0x0)      /* any other reason               */
#define GRLC_DTACS_PAGE_RESPONSE       (0x1)      /* data is sent due to a page response */
#define GRLC_DTACS_MOBILITY_MANAGEMENT (0x2)      /* mobility management data is sent */
#define GRLC_DTACS_EMPTY_FRAME         (0x3)      /* data is sent due to a cell update */
#define GRLC_DTACS_CELL_NOTIFI_NULL_FRAME (0x4)   /* data is send due to cell notification using LLC unnumbered NULL command. */

#include "CDG_LEAVE.h"


#endif