FreeCalypso > hg > fc-magnetite
view cdg211/prim/mmss.pdf @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 02 Jan 2020 05:38:26 +0000 |
parents | 56abf6cf8a0b |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : mmss.pdf ;*** Creation : Fri Jun 08 13:57:56 CST 2007 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : mmss ;*** Document No. : 6147.105.97.102 ;*** Document Date : 2002-07-19 ;*** Document Status: BEING_PROCESSED ;*** Document Author: HM ;******************************************************************************** PRAGMA SRC_FILE_TIME "Mon Nov 24 15:49:30 2003" PRAGMA LAST_MODIFIED "2002-07-19" PRAGMA ID_AND_VERSION "6147.105.97.102" CONST MAX_SDU_LEN 1 ; maximum service data unit length VALTAB VAL_ti VAL 0 - 6 "ms originated transaction" VAL 8 - 14 "ms originated transaction" VAL 7 TI_RES_MO "reserved" VAL 15 TI_RES_MT "reserved" VAR cause "MM cause" S VAR l_buf "length in bits" S VAR o_buf "offset in bits" S VAR buf "bit buffer" B VAR ti "transaction identifier" B VAL @p_mmss - VAL_ti@ VAR d1 "dummy, not used" B VAR d2 "dummy, not used" B COMP sdu "Service Data Unit" { l_buf ; length in bits o_buf ; offset in bits buf [MAX_SDU_LEN] ; bit buffer } ; MMSS_ESTABLISH_REQ 0x80000008 ; MMSS_RELEASE_REQ 0x80010008 ; MMSS_DATA_REQ 0x80020008 ; MMSS_DATA_IND 0x80004008 ; MMSS_ERROR_IND 0x80014008 ; MMSS_ESTABLISH_CNF 0x80024008 ; MMSS_ESTABLISH_IND 0x80034008 ; MMSS_RELEASE_IND 0x80044008 PRIM MMSS_ESTABLISH_REQ 0x80000008 { ti ; transaction identifier } PRIM MMSS_RELEASE_REQ 0x80010008 { ti ; transaction identifier } PRIM MMSS_DATA_REQ 0x80020008 { d1 ; dummy d2 ; dummy sdu ; service data unit } PRIM MMSS_DATA_IND 0x80004008 { d1 ; dummy d2 ; dummy sdu ; service data unit } PRIM MMSS_ERROR_IND 0x80014008 { ti ; transaction identifier cause ; error cause } PRIM MMSS_ESTABLISH_CNF 0x80024008 { ti ; transaction identifier } PRIM MMSS_ESTABLISH_IND 0x80034008 { d1 ; dummy d2 ; dummy sdu ; service data unit } PRIM MMSS_RELEASE_IND 0x80044008 { ti ; transaction identifier cause ; release cause }