view cdg3/cdginc-locosto/p_8010_128_sm_sap.h @ 629:3231dd9b38c1

armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents c15047b3d00d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_8010_128_sm_sap.h                                            |
| SOURCE  : "sap\8010_128_sm_sap.pdf"                                      |
| LastModified : "2004-06-08"                                              |
| IdAndVersion : "8010.128.02.009"                                         |
| SrcFileTime  : "Thu Nov 29 09:26:48 2007"                                |
| Generated by CCDGEN_2.5.5A on Thu Sep 25 09:18:53 2014                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : SM
 * COMPATIBILITY_DEFINES  : YES
 * ALWAYS_ENUM_IN_VAL_FILE: YES
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_8010_128_SM_SAP_H
#define P_8010_128_SM_SAP_H


#define CDG_ENTER__P_8010_128_SM_SAP_H

#define CDG_ENTER__FILENAME _P_8010_128_SM_SAP_H
#define CDG_ENTER__P_8010_128_SM_SAP_H__FILE_TYPE CDGINC
#define CDG_ENTER__P_8010_128_SM_SAP_H__LAST_MODIFIED _2004_06_08
#define CDG_ENTER__P_8010_128_SM_SAP_H__ID_AND_VERSION _8010_128_02_009

#define CDG_ENTER__P_8010_128_SM_SAP_H__SRC_FILE_TIME _Thu_Nov_29_09_26_48_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_8010_128_SM_SAP_H

#undef CDG_ENTER__FILENAME


#include "p_8010_128_sm_sap.val"

#include "p_8010_137_nas_include.h"

#include "p_8010_152_ps_include.h"

#include "p_8010_153_cause_include.h"


/*
 * End of substructure section, begin of primitive definition section
 */

#ifndef __T_SM_ACTIVATE_STARTED_IND__
#define __T_SM_ACTIVATE_STARTED_IND__
/*
 * 
 * CCDGEN:WriteStruct_Count==1238
 */
typedef struct
{
  U8                        nsapi;                    /*<  0:  1> T_NAS_nsapi,  network layer service access point identifier */
  U8                        rat;                      /*<  1:  1> T_PS_rat,  Radio access technology                 */
  U8                        _align0;                  /*<  2:  1> alignment                                          */
  U8                        _align1;                  /*<  3:  1> alignment                                          */
} T_SM_ACTIVATE_STARTED_IND;
#endif

#ifndef __T_SM_ACTIVATE_IND__
#define __T_SM_ACTIVATE_IND__
/*
 * 
 * CCDGEN:WriteStruct_Count==1239
 */
typedef struct
{
  U8                        nsapi;                    /*<  0:  1> T_NAS_nsapi,  network layer service access point identifier */
  U8                        sapi;                     /*<  1:  1> T_PS_sapi,  Service Access Point Identifier        */
  U8                        radio_prio;               /*<  2:  1> T_PS_radio_prio,  Radio priority                   */
  U8                        _align0;                  /*<  3:  1> alignment                                          */
  T_PS_ctrl_qos             ctrl_qos;                 /*<  4:  4> (enum=32bit) controller for union                  */
  T_PS_qos                  qos;                      /*<  8:  0> quality of service (type defined in "p_8010_152_ps_include.h") */
  U16                       pkt_flow_id;              /*<  0:  2> T_PS_pkt_flow_id,  packet flow identifier          */
  U8                        _align1;                  /*<  0:  1> alignment                                          */
  U8                        _align2;                  /*<  1:  1> alignment                                          */
  U8                        _align3;                  /*<  2:  1> alignment                                          */
  U8                        v_comp_params;            /*<  3:  1> valid-flag                                         */
  T_NAS_comp_params         comp_params;              /*<  4:  4> Header compression parameters (type defined in "p_8010_137_nas_include.h") */
} T_SM_ACTIVATE_IND;
#endif

#ifndef __T_SM_ACTIVATE_RES__
#define __T_SM_ACTIVATE_RES__
/*
 * 
 * CCDGEN:WriteStruct_Count==1240
 */
typedef struct
{
  U8                        nsapi;                    /*<  0:  1> T_NAS_nsapi,  network layer service access point identifier */
  U8                        _align0;                  /*<  1:  1> alignment                                          */
  U8                        _align1;                  /*<  2:  1> alignment                                          */
  U8                        v_comp_params;            /*<  3:  1> valid-flag                                         */
  T_NAS_comp_params         comp_params;              /*<  4:  4> Header compression parameters (type defined in "p_8010_137_nas_include.h") */
} T_SM_ACTIVATE_RES;
#endif

#ifndef __T_SM_DEACTIVATE_IND__
#define __T_SM_DEACTIVATE_IND__
/*
 * 
 * CCDGEN:WriteStruct_Count==1241
 */
typedef struct
{
  U16                       nsapi_set;                /*<  0:  2> set of network layer service access point identifiers */
  U8                        rel_ind;                  /*<  2:  1> T_PS_rel_ind,  Local Release Indicator             */
  U8                        _align0;                  /*<  3:  1> alignment                                          */
} T_SM_DEACTIVATE_IND;
#endif

#ifndef __T_SM_DEACTIVATE_RES__
#define __T_SM_DEACTIVATE_RES__
/*
 * 
 * CCDGEN:WriteStruct_Count==1242
 */
typedef struct
{
  U16                       nsapi_set;                /*<  0:  2> set of network layer service access point identifiers */
  U8                        _align0;                  /*<  2:  1> alignment                                          */
  U8                        _align1;                  /*<  3:  1> alignment                                          */
} T_SM_DEACTIVATE_RES;
#endif

#ifndef __T_SM_MODIFY_IND__
#define __T_SM_MODIFY_IND__
/*
 * 
 * CCDGEN:WriteStruct_Count==1243
 */
typedef struct
{
  U8                        nsapi;                    /*<  0:  1> T_NAS_nsapi,  network layer service access point identifier */
  U8                        sapi;                     /*<  1:  1> T_PS_sapi,  Service Access Point Identifier        */
  U8                        radio_prio;               /*<  2:  1> T_PS_radio_prio,  Radio priority                   */
  U8                        _align0;                  /*<  3:  1> alignment                                          */
  U16                       pkt_flow_id;              /*<  4:  2> T_PS_pkt_flow_id,  packet flow identifier          */
  U8                        _align1;                  /*<  6:  1> alignment                                          */
  U8                        _align2;                  /*<  7:  1> alignment                                          */
  T_PS_ctrl_qos             ctrl_qos;                 /*<  8:  4> (enum=32bit) controller for union                  */
  T_PS_qos                  qos;                      /*< 12:  0> quality of service (type defined in "p_8010_152_ps_include.h") */
} T_SM_MODIFY_IND;
#endif

#ifndef __T_SM_MODIFY_RES__
#define __T_SM_MODIFY_RES__
/*
 * 
 * CCDGEN:WriteStruct_Count==1244
 */
typedef struct
{
  U8                        nsapi;                    /*<  0:  1> T_NAS_nsapi,  network layer service access point identifier */
  U8                        _align0;                  /*<  1:  1> alignment                                          */
  U8                        _align1;                  /*<  2:  1> alignment                                          */
  U8                        _align2;                  /*<  3:  1> alignment                                          */
} T_SM_MODIFY_RES;
#endif

#ifndef __T_SM_STATUS_REQ__
#define __T_SM_STATUS_REQ__
/*
 * 
 * CCDGEN:WriteStruct_Count==1245
 */
typedef struct
{
  U16                       nsapi_set;                /*<  0:  2> set of network layer service access point identifiers */
  U8                        sapi;                     /*<  2:  1> T_PS_sapi,  Service Access Point Identifier        */
  U8                        _align0;                  /*<  3:  1> alignment                                          */
  T_CAUSE_ps_cause          ps_cause;                 /*<  4:  4> Cause element containing result of operation (type defined in "p_8010_153_cause_include.h") */
} T_SM_STATUS_REQ;
#endif

#ifndef __T_SM_COMPRESSION_REQ__
#define __T_SM_COMPRESSION_REQ__
/*
 * 
 * CCDGEN:WriteStruct_Count==1246
 */
typedef struct
{
  U16                       nsapi_set;                /*<  0:  2> set of network layer service access point identifiers */
  U8                        _align0;                  /*<  2:  1> alignment                                          */
  U8                        _align1;                  /*<  3:  1> alignment                                          */
  T_NAS_comp_params         comp_params;              /*<  4:  4> Header compression parameters (type defined in "p_8010_137_nas_include.h") */
} T_SM_COMPRESSION_REQ;
#endif


#include "CDG_LEAVE.h"


#endif