view cdg3/cdginc-locosto/p_mnss.val @ 629:3231dd9b38c1

armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents c15047b3d00d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_mnss.val                                                     |
| SOURCE  : "sap\mnss.pdf"                                                 |
| LastModified : "2002-08-01"                                              |
| IdAndVersion : "6147.102.97.104"                                         |
| SrcFileTime  : "Thu Nov 29 09:48:44 2007"                                |
| Generated by CCDGEN_2.5.5A on Thu Sep 25 09:18:53 2014                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_MNSS_VAL
#define P_MNSS_VAL


#define CDG_ENTER__P_MNSS_VAL

#define CDG_ENTER__FILENAME _P_MNSS_VAL
#define CDG_ENTER__P_MNSS_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_MNSS_VAL__LAST_MODIFIED _2002_08_01
#define CDG_ENTER__P_MNSS_VAL__ID_AND_VERSION _6147_102_97_104

#define CDG_ENTER__P_MNSS_VAL__SRC_FILE_TIME _Thu_Nov_29_09_48_44_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_MNSS_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_ti
 */
#define TI_RES_MO                      (0x7)      /* reserved                       */
#define TI_RES_MT                      (0xf)      /* reserved                       */

/*
 * Value constants for VAL_cause
 */
#define MNSS_CAUSE_UNASSIGN            (0x600)    /* Unassigned (unallocated) Note 9 number */
#define MNSS_CAUSE_NO_ROUTE            (0x603)    /* No route to destination        */
#define MNSS_CAUSE_CHAN_UNACCEPT       (0x606)    /* Channel unacceptable           */
#define MNSS_CAUSE_BARRED              (0x608)    /* Operator determined barring    */
#define MNSS_CAUSE_CALL_CLEAR          (0x610)    /* Normal call clearing           */
#define MNSS_CAUSE_USER_BUSY           (0x611)    /* User busy                      */
#define MNSS_CAUSE_NO_RESPONSE         (0x612)    /* No user responding             */
#define MNSS_CAUSE_ALERT_NO_ANSWER     (0x613)    /* User alerting, no answer       */
#define MNSS_CAUSE_CALL_REJECT         (0x615)    /* Call rejected                  */
#define MNSS_CAUSE_NUM_CHANGED         (0x616)    /* Number changed                 */
#define MNSS_CAUSE_PREEMPTION          (0x619)    /* Pre-emption                    */
#define MNSS_CAUSE_USER_CLEAR          (0x61a)    /* Non selected user clearing     */
#define MNSS_CAUSE_DEST_ORDER          (0x61b)    /* Destination out of order       */
#define MNSS_CAUSE_NUM_FORMAT          (0x61c)    /* Invalid number format (incomplete number) */
#define MNSS_CAUSE_FACILITY_REJECT     (0x61d)    /* Facility rejected              */
#define MNSS_CAUSE_STATUS_ENQUIRY      (0x61e)    /* Response to STATUS ENQUIRY     */
#define MNSS_CAUSE_UNSPECIFIED         (0x61f)    /* Normal, unspecified            */
#define MNSS_CAUSE_NO_CHAN_AVAIL       (0x622)    /* No circuit/channel available   */
#define MNSS_CAUSE_NETWORK_ORDER       (0x626)    /* Network out of order           */
#define MNSS_CAUSE_TEMP_FAIL           (0x629)    /* Temporary failure              */
#define MNSS_CAUSE_SWITCH_CONGEST      (0x62a)    /* Switching equipment congestion */
#define MNSS_CAUSE_INFO_DISCARD        (0x62b)    /* Access information discarded   */
#define MNSS_CAUSE_REQ_CHAN_UNAVAIL    (0x62c)    /* requested circuit/channel not available */
#define MNSS_CAUSE_RESOURCE_UNAVAIL    (0x62f)    /* Resources unavailable, unspecified */
#define MNSS_CAUSE_QOS_UNAVAIL         (0x631)    /* Quality of service unavailable */
#define MNSS_CAUSE_FACILITY_UNSUBSCRIB (0x632)    /* Requested facility not subscribed */
#define MNSS_CAUSE_BARRED_IN_CUG       (0x637)    /* Incoming calls barred within the CUG */
#define MNSS_CAUSE_BEARER_CAP_AUTHORIZ (0x639)    /* Bearer capability not authorized */
#define MNSS_CAUSE_BEARER_CAP_UNAVAIL  (0x63a)    /* Bearer capability not presently available */
#define MNSS_CAUSE_SERVICE_UNAVAIL     (0x63f)    /* Service or option not available, unspecified */
#define MNSS_CAUSE_BEARER_NOT_IMPLEM   (0x641)    /* Bearer service not implemented */
#define MNSS_CAUSE_ACM_MAX             (0x644)    /* ACM equal to or greater than ACMmax */
#define MNSS_CAUSE_FACILITY_NOT_IMPLEM (0x645)    /* Requested facility not implemented */
#define MNSS_CAUSE_RESTICT_BEARER_CAP  (0x646)    /* Only restricted digital information bearer capability is available */
#define MNSS_CAUSE_SERVICE_NOT_IMPLEM  (0x64f)    /* Service or option not implemented, unspecified */
#define MNSS_CAUSE_INVALID_TI          (0x651)    /* Invalid transaction identifier value */
#define MNSS_CAUSE_USER_NOT_IN_CUG     (0x657)    /* User not member of CUG         */
#define MNSS_CAUSE_INCOMPAT_DEST       (0x658)    /* Incompatible destination       */
#define MNSS_CAUSE_INVALID_TRANS_NET   (0x65b)    /* Invalid transit network selection */
#define MNSS_CAUSE_INCORRECT_MESSAGE   (0x65f)    /* Semantically incorrect message */
#define MNSS_CAUSE_INVALID_MAND_INFO   (0x660)    /* Invalid mandatory information  */
#define MNSS_CAUSE_MESSAGE_TYPE_NOT_IMPLEM (0x661)/* Message type non-existent or not implemented */
#define MNSS_CAUSE_MESSAGE_TYPE_INCOMPAT (0x662)  /* Message type not compatible with protocol state */
#define MNSS_CAUSE_INFO_ELEM_NOT_IMPLEM (0x663)   /* Information element non existent or not implemented */
#define MNSS_CAUSE_COND_INFO_ELEM      (0x664)    /* Conditional IE error           */
#define MNSS_CAUSE_MESSAGE_INCOMPAT    (0x665)    /* Message not compatible with protocol state */
#define MNSS_CAUSE_TIMER               (0x666)    /* Recovery on timer expiry       */
#define MNSS_CAUSE_PROTOCOL            (0x66f)    /* Protocol error, unspecified    */
#define MNSS_CAUSE_INTERWORKING        (0x67f)    /* Interworking, unspecified      */
#define MNSS_CAUSE_NO_NET_CAUSE        (0x86ff)   /* Network initiated without cause */

/*
 * user defined constants
 */
#define FACILITY_LEN                   (0xfb)     
#define VERSION_LEN                    (0x8)      
#define SS_ORIGINATING_ENTITY          (0x6)      

#include "CDG_LEAVE.h"


#endif