FreeCalypso > hg > fc-magnetite
view cdg3/cdginc-locosto/p_tb.h @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 02 Jan 2020 05:38:26 +0000 |
parents | c15047b3d00d |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_tb.h | | SOURCE : "sap\tb.pdf" | | LastModified : "2001-07-17" | | IdAndVersion : "8441.112.01.002" | | SrcFileTime : "Thu Nov 29 09:54:48 2007" | | Generated by CCDGEN_2.5.5A on Thu Sep 25 09:18:53 2014 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_TB_H #define P_TB_H #define CDG_ENTER__P_TB_H #define CDG_ENTER__FILENAME _P_TB_H #define CDG_ENTER__P_TB_H__FILE_TYPE CDGINC #define CDG_ENTER__P_TB_H__LAST_MODIFIED _2001_07_17 #define CDG_ENTER__P_TB_H__ID_AND_VERSION _8441_112_01_002 #define CDG_ENTER__P_TB_H__SRC_FILE_TIME _Thu_Nov_29_09_54_48_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_TB_H #undef CDG_ENTER__FILENAME #include "p_tb.val" #ifndef __T_tb_meas_result__ #define __T_tb_meas_result__ /* * * CCDGEN:WriteStruct_Count==3100 */ typedef struct { U16 arfcn; /*< 0: 2> channel number */ U16 rxlev; /*< 2: 2> measurement value */ U8 num_meas; /*< 4: 1> number */ U8 _align0; /*< 5: 1> alignment */ U8 _align1; /*< 6: 1> alignment */ U8 _align2; /*< 7: 1> alignment */ } T_tb_meas_result; #endif /* * End of substructure section, begin of primitive definition section */ #ifndef __T_TB_MEAS_IND__ #define __T_TB_MEAS_IND__ /* * * CCDGEN:WriteStruct_Count==3101 */ typedef struct { T_tb_meas_result tb_meas_result[TB_BA_LIST_SIZE]; /*< 0:264> */ } T_TB_MEAS_IND; #endif #ifndef __T_TB_RXLEV_SC_REQ__ #define __T_TB_RXLEV_SC_REQ__ /* * * CCDGEN:WriteStruct_Count==3102 */ typedef struct { U8 sc_rxlev; /*< 0: 1> RXLEV value of the serving cell. */ U8 _align0; /*< 1: 1> alignment */ U8 _align1; /*< 2: 1> alignment */ U8 _align2; /*< 3: 1> alignment */ } T_TB_RXLEV_SC_REQ; #endif #include "CDG_LEAVE.h" #endif