FreeCalypso > hg > fc-magnetite
view cdg3/msg/gmm.mdf @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 02 Jan 2020 05:38:26 +0000 |
parents | c15047b3d00d |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : gmm.mdf ;*** Creation : Thu Jun 19 15:32:09 CST 2008 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Air Interface Message Specification ;*** Document Name : gmm ;*** Document No. : 8441.603.02.013 ;*** Document Date : 2003-08-18 ;*** Document Status: BEING_PROCESSED ;*** Document Author: TLS ;******************************************************************************** PRAGMA SRC_FILE_TIME "Wed Nov 28 10:18:48 2007" PRAGMA LAST_MODIFIED "2003-08-18" PRAGMA ID_AND_VERSION "8441.603.02.013" CONST L3MAX 251 ; maximum size of a L3 buffer CONST MAX_N_PDU_NUMBER_LIST 11 ; maximum size of N-PDU number list VALTAB VAL_tmsi_flag VAL 0 NO "not present" VAL 1 YES "present" VALTAB VAL_key_sequence RANGE 0 .. 6 "Possible values for the ciphering key sequence number" VAL 7 NO_KEY "No key is available (MS to network); Reserved (network to MS)" VALTAB VAL_imeisv_request_value VAL DEF "IMEISV not requested" VAL 0 IMEISV_NOT_REQUESTED "IMEISV not requested" VAL 1 IMEISV_REQUESTED "IMEISV requested" VALTAB VAL_type_of_algorithm VAL DEF "reserved" VAL 0 NO_CIPHERING "ciphering not used" VAL 1 GEA_1 "GPRS Encryption Algorithm GEA/1" VAL 2 GEA_2 "GPRS Encryption Algorithm GEA/2" VAL 3 GEA_3 "GPRS Encryption Algorithm GEA/3" VAL 4 GEA_4 "GPRS Encryption Algorithm GEA/4" VAL 5 GEA_5 "GPRS Encryption Algorithm GEA/5" VAL 6 GEA_6 "GPRS Encryption Algorithm GEA/6" VAL 7 GEA_7 "GPRS Encryption Algorithm GEA/7" VALTAB VAL_update_type_value VAL DEF "reserved" VAL 0 RAU "RA updating" VAL 1 COMBINED_RAU "combined RA/LA updating" VAL 2 COMBINED_RAU_IMSI_ATTACH "combined RA/LA updating with IMSI attach" VAL 3 PERIODIC_RAU "Periodic updating" VALTAB VAL_result_value VAL DEF "reserved" VAL 0 NORMAL_UPDATED "normal RA updated" VAL 1 NORMAL_ATTACHED "normal attached or combined RA/LA updated" VAL 3 COMBINED_ATTACHED "combined attached" VALTAB VAL_odd_even VAL 0 EVEN "even number of identity digits and also when the TMSI or P-TMSI is used" VAL 1 ODD "odd number of identity digits" VALTAB VAL_cause_value RANGE 48 .. 63 "retry upon entry into a new cell" VAL DEF "Protocol error, unspecified" VAL 2 ERRCS_IMSI_UNKNOWN "IMSI unknown in HLR" VAL 3 ERRCS_ILLEGAL_MS "Illegal MS" VAL 4 ERRCS_IMEI_NOT_ACCEPTED "IMEI not accepted" VAL 6 ERRCS_ILLEGAL_ME "Illegal ME" VAL 7 ERRCS_GPRS_NOT_ALLOWED "GPRS services not allowed" VAL 8 ERRCS_GSM_GPRS_NOT_ALLOWED "GPRS services and non-GPRS services not allowed" VAL 9 ERRCS_NO_MS_ID "MS identity cannot be derived by the network" VAL 10 ERRCS_IMPLICIT_DETACHED "Implicitly detached" VAL 11 ERRCS_PLMN_NOT_ALLOWED "PLMN not allowed" VAL 12 ERRCS_LA_NOT_ALLOWED "Location Area not allowed" VAL 13 ERRCS_ROAMING_NOT_ALLOWED "Roaming not allowed in this location area" VAL 14 ERRCS_GPRS_NOT_ALLOWED_IN_PLMN "GPRS services not allowed in this PLMN" VAL 15 ERRCS_NO_SUITABLE_CELL_IN_LA %REL99% "Find another allowed location area in the same PLMN" VAL 16 ERRCS_MSC_TEMP_NOT_REACHABLE "MSC temporarily not reachable" VAL 17 ERRCS_NET_FAIL "Network failure" VAL 22 ERRCS_CONGESTION "Congestion" VAL 95 ERRCS_SEMANTIC_INCORRECT "Semantically incorrect message" VAL 96 ERRCS_INVALID_M_INFO "Invalid mandatory information" VAL 97 ERRCS_TYPE_INVALID "Message type non-existent or not implemented" VAL 98 ERRCS_TYPE_INCOMPATIBLE "Message type not compatible with the protocol state" VAL 99 ERRCS_IE_INVALID "Information element non-existent or not implemented" VAL 100 ERRCS_COND_IE_ERROR "Conditional IE error" VAL 101 ERRCS_MESSAGE_INVALID "Message not compatible with the protocol state" VAL 111 ERRCS_PROTOCOL_ERROR "Protocol error, unspecified" VALTAB VAL_gea_1 VAL 0 GEA_1_NO "GEA/1 not available" VAL 1 GEA_1_YES "GEA/1 available" VALTAB VAL_sm_capabilities_gsm VAL 0 SM_CAP_GSM_NO "SM capability not present" VAL 1 SM_CAP_GSM_YES "SM capability present" VALTAB VAL_sm_capabilities_gprs VAL 0 SM_CAP_GPRS_NO "SM capability not present" VAL 1 SM_CAP_GPRS_YES "SM capability present" VALTAB VAL_ucs2_support VAL 0 UCS2_YES "preference for the default alphabet over UCS2" VAL 1 UCS2_NO "no preference for the default alphabet over UCS2" VALTAB VAL_type_of_identity VAL DEF "reserved" VAL 0 ID_TYPE_NO_IDENT "No Identity" VAL 1 ID_TYPE_IMSI "IMSI" VAL 2 ID_TYPE_IMEI "IMEI" VAL 3 ID_TYPE_IMEISV "IMEISV" VAL 4 ID_TYPE_TMSI "TMSI/P-TMSI" VALTAB VAL_type_of_identity_2 VAL DEF "IMSI" VAL 1 ID2_TYPE_IMSI "IMSI" VAL 2 ID2_TYPE_IMEI "IMEI" VAL 3 ID2_TYPE_IMEISV "IMEISV" VAL 4 ID2_TYPE_TMSI "TMSI" VALTAB VAL_type_of_attach VAL DEF "GPRS attach" VAL 1 AT_GPRS "GPRS attach" VAL 2 AT_WHILE_IMSI_AT "GPRS attach while IMSI attached" VAL 3 AT_COMB "Combined GPRS/IMSI attach" VALTAB VAL_u_type_of_detach VAL DEF "Combined GPRS/IMSI detach" VAL 1 DT_GPRS "GPRS detach" VAL 2 DT_IMSI "IMSI detach" VAL 3 DT_COMB "Combined GPRS/IMSI detach" VALTAB VAL_d_type_of_detach VAL DEF "re-attach not required" VAL 1 DT_RE_ATTACH "re-attch required" VAL 2 DT_NO_RE_ATTACH "re-attach not required" VAL 3 DT_IMSI_DETACH "IMSI detach (after VLR failure)" VALTAB VAL_split_pg_cycle_code RANGE 1 .. 64 "1-64, respectively" RANGE 65 .. 98 "" VAL DEF "reserved" VAL 0 DRX_NOT_USED "no DRX used by MS" VALTAB VAL_split_on_ccch VAL 0 SPLIT_NO "Spit on CCCH is not supported by the MS" VAL 1 SPLIT_YES "Spit on CCCH is supported by the MS" VALTAB VAL_non_drx_timer VAL 0 DRX_NO "no non-DRX mode after transfer state" VAL 1 DRX_1_SEC "max. 1 sec non-DRX mode after transfer" VAL 2 DRX_2_SEC "max. 2 sec non-DRX mode after transfer" VAL 3 DRX_4_SEC "max. 4 sec non-DRX mode after transfer" VAL 4 DRX_8_SEC "max. 8 sec non-DRX mode after transfer" VAL 5 DRX_16_SEC "max. 16 sec non-DRX mode after transfer" VAL 6 DRX_32_SEC "max. 32 sec non-DRX mode after transfer" VAL 7 DRX_64_SEC "max. 64 sec non-DRX mode after transfer" VALTAB VAL_timer_unit VAL DEF "value is incremented in multiples of 1 min" VAL 0 TIMER_2_SEC "value is incremented in multiples of 2 sec" VAL 1 TIMER_1_MIN "value is incremented in multiples of 1 min" VAL 2 TIMER_1_DH "value is incremented in multiples of 1 dh" VAL 7 TIMER_DEACT "timer is deactivated" VALTAB VAL_force_to_standby_value VAL DEF "reserved" VAL 0 STANDBY_NO "Force to standby not indicated" VAL 1 STANDBY_YES "Force to standby indicated" VALTAB VAL_radio_priority_level_value VAL DEF "priority level 4" VAL 1 RP_LEVEL_1 "priority level 1" VAL 2 RP_LEVEL_2 "priority level 2??????????" VAL 3 RP_LEVEL_3 "priority level 3" VAL 4 RP_LEVEL_4 "priority level 4" VALTAB VAL_power_off VAL 0 PO_NORMAL_DETACH "normal detach" VAL 1 PO_POWER_OFF "power switched off" VALTAB VAL_code VAL DEF "reserved" VAL 0 SMS "SMS Cell Broadcst coding scheme defined in GSM 03.38" VAL 1 USC2 "UCS2 (16 bit)" VALTAB VAL_add_ci VAL 0 CI_NO "The MS shoule not add the letters for the Country's Initials to the text string" VAL 1 CI_ADD "The MS should add the letters for the Country's Initials and a separator" VALTAB VAL_nr_sparebits VAL DEF "bit 'value' to 8 (inclusive) are spare and set to '0' in octet n" VAL 0 SP_NULL "this field carries no information about the number of spare bits in octet n" VALTAB VAL_nsapi VAL DEF "reserved" VAL 5 NSAPI_5 "NSAPI 5" VAL 6 NSAPI_6 "NSAPI 6" VAL 7 NSAPI_7 "NSAPI 7" VAL 8 NSAPI_8 "NSAPI 8" VAL 9 NSAPI_9 "NSAPI 9" VAL 10 NSAPI_10 "NSAPI 10" VAL 11 NSAPI_11 "NSAPI 11" VAL 12 NSAPI_12 "NSAPI 12" VAL 13 NSAPI_13 "NSAPI 13" VAL 14 NSAPI_14 "NSAPI 14" VAL 15 NSAPI_15 "NSAPI 15" VALTAB VAL_rev_level_ind VAL 0 REV_LEVEL_IND_99_NO "MS supports version(s) older than Release 1999" VAL 1 REV_LEVEL_IND_99_YES "MS supports Release 1999" VALTAB VAL_save_time_value %REL99% VAL 0 TIME_ADJ_NO %REL99% "No adjustment for Daylight Saving Time" VAL 1 TIME_ADJ_1 %REL99% "+1 hour adjustment for Daylight Saving Time" VAL 2 TIME_ADJ_2 %REL99% "+2 hours adjustment for Daylight Saving Time" VAR tmsi_flag "TMSI flag" 1 VAL @m_gmm - VAL_tmsi_flag@ VAR solsa_capability "SoLSA Capability" 1 VAL @m_gmm - VAL_tmsi_flag@ VAR pfc_feature_mode "PFC feature mode" 1 VAL @m_gmm - VAL_tmsi_flag@ VAR gea_2 "GEA/2" 1 VAL @m_gmm - VAL_tmsi_flag@ VAR gea_3 "GEA/3" 1 VAL @m_gmm - VAL_tmsi_flag@ VAR gea_4 "GEA/4" 1 VAL @m_gmm - VAL_tmsi_flag@ VAR gea_5 "GEA/5" 1 VAL @m_gmm - VAL_tmsi_flag@ VAR gea_6 "GEA/6" 1 VAL @m_gmm - VAL_tmsi_flag@ VAR gea_7 "GEA/7" 1 VAL @m_gmm - VAL_tmsi_flag@ VAR sres_value "SRES value" 32 VAR identity_digit "Identity digit" 4 VAR key_sequence "key sequence" 3 VAL @m_gmm - VAL_key_sequence@ VAR a_c_reference_number_value "A&C reference number value" 4 VAR imeisv_request_value "IMEISV request value" 3 VAL @m_gmm - VAL_imeisv_request_value@ VAR type_of_algorithm "Type of algorithm" 3 VAL @m_gmm - VAL_type_of_algorithm@ VAR lac "Location Area Code" 16 VAR rac "Routing Area Code" 8 VAR update_type_value "Update type value" 3 VAL @m_gmm - VAL_update_type_value@ VAR result_value "result value" 3 VAL @m_gmm - VAL_result_value@ VAR msg_type "Message Type" 8 VAR mcc "Mobile Country Code" 4 VAR mnc "Mobile Network Code" 4 VAR odd_even "Odd Even indication" 1 VAL @m_gmm - VAL_odd_even@ VAR rand_value "RAND value" 8 VAR cause_value "Cause value" 8 VAL @m_gmm - VAL_cause_value@ VAR gea_1 "GEA/1" 1 VAL @m_gmm - VAL_gea_1@ VAR ss_screening_indicator "SS Screening Indicator" 2 VAR sm_capabilities_gsm "Short message cap. via dedicated channels" 1 VAL @m_gmm - VAL_sm_capabilities_gsm@ VAR sm_capabilities_gprs "Short message capability via GPRS channels" 1 VAL @m_gmm - VAL_sm_capabilities_gprs@ VAR ucs2_support "UCS2 support" 1 VAL @m_gmm - VAL_ucs2_support@ VAR type_of_identity "Type of identity" 3 VAL @m_gmm - VAL_type_of_identity@ VAR type_of_identity_2 "Type of identity 2" 3 VAL @m_gmm - VAL_type_of_identity_2@ VAR tmsi "P-TMSI or TMSI" 32 VAR p_tmsi_signature_value "P-TMSI signature value" 24 VAR type_of_attach "Type of attach" 3 VAL @m_gmm - VAL_type_of_attach@ VAR u_type_of_detach "Type of detach (uplink)" 3 VAL @m_gmm - VAL_u_type_of_detach@ VAR d_type_of_detach "Type of detach (downlink)" 3 VAL @m_gmm - VAL_d_type_of_detach@ VAR split_pg_cycle_code "SPLIT PG CYCLE CODE" 8 VAL @m_gmm - VAL_split_pg_cycle_code@ VAR split_on_ccch "SPLIT on CCCH" 1 VAL @m_gmm - VAL_split_on_ccch@ VAR non_drx_timer "non-DRX timer" 3 VAL @m_gmm - VAL_non_drx_timer@ VAR timer_unit "timer unit" 3 VAL @m_gmm - VAL_timer_unit@ VAR timer_value "timer value" 5 VAR force_to_standby_value "Force to standby value" 3 VAL @m_gmm - VAL_force_to_standby_value@ VAR radio_priority_level_value "Radio priority level value" 3 VAL @m_gmm - VAL_radio_priority_level_value@ VAR power_off "Power off" 1 VAL @m_gmm - VAL_power_off@ VAR code "Coding scheme" 3 VAL @m_gmm - VAL_code@ VAR add_ci "Add CI" 1 VAL @m_gmm - VAL_add_ci@ VAR nr_sparebits "Number of spare bits in last octet" 3 VAL @m_gmm - VAL_nr_sparebits@ VAR year "Year" 4 VAR month "Month" 4 VAR day "Day" 4 VAR hour "Hour" 4 VAR minute "Minute" 4 VAR second "Second" 4 VAR time_zone_value "Time zone value" 8 VAR nsapi "NSAPI" 4 VAL @m_gmm - VAL_nsapi@ VAR receive_n_pdu_number_val "Receive N-PDU Number value" 8 VAR text_string "Text string" 8 VAR dmy "Dummy" 4 VAR rev_level_ind "Revision level indicator" 1 VAL @m_gmm - VAL_rev_level_ind@ VAR nsapi_set %REL99% "NSAPI set" 16 VAR lsa_id %REL99% "LSA identifier" 8 VAR save_time_value %REL99% "Daylight Saving Time" 2 VAL @m_gmm - VAL_save_time_value@ COMP authentication_parameter_rand "Authentication parameter RAND" { rand_value [16] ; RAND value } COMP ciphering_key_sequence_number "Ciphering Key Sequence Number" { .0 ; spare key_sequence ; Key Sequence } COMP a_c_reference_number "A&C reference number" { a_c_reference_number_value ; A&C reference number value } COMP imeisv_request "IMEISV request" { .0 ; spare imeisv_request_value ; IMEISV request } COMP ciphering_algorithm "Ciphering algorithm" { .0 ; spare type_of_algorithm ; Type of algorithm } COMP authentication_parameter_sres "Authentication parameter SRES" { sres_value ; SRES value } COMP identity_type_2 "Identity type 2" { .0 ; spare type_of_identity_2 ; Type of identity 2 } COMP routing_area_identification "Routing Area Identification" { BCD_NOFILL mcc [3] ; Mobile Country Code BCD_MNC mnc [2..3] ; Mobile Network Code lac ; Location Area Code rac ; Routing Area Code } COMP update_type "Update type" { .0 ; spare update_type_value ; Update type value } COMP result_gmm "Result" { .0 ; spare result_value ; result value } COMP mobile_identity "Mobile Identity" { type_of_identity (GETPOS,:,4,+,:,1,+,SETPOS) ; Type of identity odd_even (SETPOS) ; Odd/ Even indicaction < (type_of_identity # ID_TYPE_NO_IDENT AND type_of_identity # ID_TYPE_TMSI) BCDODD identity_digit [0..16] (SETPOS)> ; Identity digit < (type_of_identity = ID_TYPE_TMSI) .1111 (:,SETPOS,8,+)> ; spare < (type_of_identity = ID_TYPE_TMSI) tmsi [.32] (SETPOS)> ; TMSI or P-TMSI < (type_of_identity = ID_TYPE_NO_IDENT) dmy [0..16] (SETPOS)> ; dummy } TYPEDEF COMP mobile_identity gmobile_identity "PTMSI mobile Identity" COMP attach_type "Attach type" { .0 ; spare type_of_attach ; Type of attach } COMP d_detach_type "Detach type (downlink)" { .0 ; spare d_type_of_detach ; Type of detach (downlink) } COMP u_detach_type "Detach type (uplink)" { power_off ; Power off u_type_of_detach ; Type of detach (uplink) } COMP drx_parameter "DRX parameter" { split_pg_cycle_code ; SPLIT PG CYCLE CODE .0000 ; spare split_on_ccch ; SPLIT on CCCCH non_drx_timer ; non_DRX timer } COMP ready_timer "GPRS READY timer value" { timer_unit ; timer unit timer_value ; timer value } TYPEDEF COMP ready_timer rau_timer "GPRS RAU timer value" COMP t3302 "T3302" { timer_unit ; timer unit timer_value ; timer value } COMP p_tmsi_signature "P-TMSI signature" { p_tmsi_signature_value ; P-TMSI signature value } COMP force_to_standby "Force to standby" { .0 ; spare force_to_standby_value ; Force to standby value } COMP radio_priority "Radio priority" { .0 ; spare radio_priority_level_value ; Radio priority level value } COMP gmm_cause "GMM cause" { cause_value ; Cause value } COMP receive_n_pdu_number_list_val "Receive N-PDU Number List value" { nsapi ; NSAPI receive_n_pdu_number_val ; Receive N-PDU Number value } COMP receive_n_pdu_number_list "Receive N-PDU Number List" { receive_n_pdu_number_list_val [(LTAKE/12)..MAX_N_PDU_NUMBER_LIST] ; Receive N-PDU Number List value S_PADDING .00000000 ; Spare Padding } COMP full_network_name "Full network name" { .1 ; ext 1 code ; coding scheme add_ci ; Add CI nr_sparebits ; Number of spare bits in last octet text_string [1..254] ; Text String } TYPEDEF COMP full_network_name short_network_name "Short network name" COMP time_zone "Time Zone" { time_zone_value ; Time zone value } COMP time_zone_and_time "Net time and time zone" { BCDEVEN year [2] ; Year BCDEVEN month [2] ; Month BCDEVEN day [2] ; Day BCDEVEN hour [2] ; Hour BCDEVEN minute [2] ; Minute BCDEVEN second [2] ; Second time_zone_value ; Time zone value } COMP tmsi_status "TMSI status" { .000 ; spare tmsi_flag ; TMSI flag } COMP ext_gea_bits "Extended GEA bits" { gea_2 ; GEA/2 gea_3 ; GEA/3 gea_4 ; GEA/4 gea_5 ; GEA/5 gea_6 ; GEA/6 gea_7 ; GEA/7 } COMP ms_network_capability "MS Network Capability" { gea_1 ; GPRS Encryption Algorithm GEA/1 sm_capabilities_gsm ; Short message cap. via dedicated channels sm_capabilities_gprs ; Short message capability via GPRS channels ucs2_support ; UCS2 support ss_screening_indicator ; SS Screening Indicator solsa_capability ; SoLSA Capability rev_level_ind ; Revision level indcator pfc_feature_mode ; PFC feature mode ext_gea_bits ; Extended GEA bits .0 ; spare } COMP eqv_plmn "PLMN" { BCD_NOFILL mcc [3] ; Mobile Country Code BCD_MNC mnc [2..3] ; Mobile Network Code } COMP eqv_plmn_list "PLMN list" { eqv_plmn [1..5] ; PLMN } COMP cell_notification "Cell Notification" { } COMP p_tmsi_signature_2 %REL99% "P-TMSI signature 2" { p_tmsi_signature_value ; P-TMSI signature value } COMP pdp_context_status %REL99% "PDP context status" { nsapi_set %REL99% ; NSAPI set } COMP lsa_identifier %REL99% "LSA identifier" { lsa_id [1..3] %REL99% ; LSA ID } COMP daylight_save_time %REL99% "Daylight Saving Time" { .000000 %REL99% ; Spare save_time_value %REL99% ; Daylight Saving Time } MSG attach_request uplink 1 ; attach request { GSM3_V msg_type ; Message Type GSM4_LV ms_network_capability ; MS network capability GSM1_V attach_type ; Attach type GSM1_V ciphering_key_sequence_number ; Ciphering key sequence number GSM3_V drx_parameter ; DRX parameter GSM4_LV gmobile_identity ; P-TMSI or IMSI GSM3_V routing_area_identification ; Old routing area identification GSM4_LV EXTERN @m_rr_com - ra_cap@ ra_cap ; MS Radio Access capability GSM3_TV p_tmsi_signature 0x19 ; Old P-TMSI signature GSM3_TV ready_timer 0x17 ; Requested READY timer value GSM1_TV tmsi_status 0x9 ; TMSI status } MSG attach_accept downlink 2 ; attach accept { GSM3_V msg_type ; Message type GSM1_V result_gmm ; result GSM1_V force_to_standby ; Force to standby GSM3_V rau_timer ; Periodic RA update timer GSM1_V radio_priority ; Radio priority for SMS .0000 ; Spare half octet GSM3_V routing_area_identification ; Routing area identification GSM3_TV p_tmsi_signature 0x19 ; P-TMSI signature GSM3_TV ready_timer 0x17 ; Negotiated READY timer value GSM4_TLV gmobile_identity 0x18 ; Allocated P-TMSI GSM4_TLV mobile_identity 0x23 ; MS identity GSM3_TV gmm_cause 0x25 ; GMM cause GSM4_TLV t3302 0x2A ; T3302 value GSM2_T cell_notification 0x8C ; Cell Notification GSM4_TLV eqv_plmn_list 0x4A ; Equivalent PLMNs } MSG attach_complete uplink 3 ; Attach complete { GSM3_V msg_type ; Message Type } MSG attach_reject downlink 4 ; Attach reject { GSM3_V msg_type ; Message Type GSM3_V gmm_cause ; GMM cause GSM4_TLV t3302 0x2A %REL99% ; T3302 value } MSG d_detach_request downlink 5 ; Detach request { GSM3_V msg_type ; Message Type GSM1_V d_detach_type ; Detach type (downlink) GSM1_V force_to_standby ; Force to standby GSM3_TV gmm_cause 0x25 ; GMM cause } MSG u_detach_request uplink 5 ; Detach request { GSM3_V msg_type ; Message Type GSM1_V u_detach_type ; Detach type (uplink) .0000 ; Spare half octet GSM4_TLV gmobile_identity 0x18 %REL99% ; P TMSI GSM4_TLV p_tmsi_signature_2 0x19 %REL99% ; P-TMSI signature 2 } MSG u_detach_accept uplink 6 ; Detach accept { GSM3_V msg_type ; Message Type } MSG d_detach_accept downlink 6 ; Detach accept { GSM3_V msg_type ; Message Type GSM1_V force_to_standby ; Force to standby .0000 ; Spare half octet } MSG routing_area_update_request uplink 8 ; Routing area update request { GSM3_V msg_type ; Message Type GSM1_V update_type ; Update type GSM1_V ciphering_key_sequence_number ; Ciphering key sequence number GSM3_V routing_area_identification ; Old routing area identification GSM4_LV EXTERN @m_rr_com - ra_cap@ ra_cap ; MS Radio Access capability GSM3_TV p_tmsi_signature 0x19 ; Old P-TMSI signature GSM3_TV ready_timer 0x17 ; Requested READY timer value GSM3_TV drx_parameter 0x27 ; DRX parameter GSM1_TV tmsi_status 0x9 ; TMSI status GSM4_TLV gmobile_identity 0x18 %REL99% ; P-TMSI GSM4_TLV ms_network_capability 0x31 ; MS network capability GSM4_TLV pdp_context_status 0x32 %REL99% ; PDP context status } MSG routing_area_update_accept downlink 9 ; Routing area update accept { GSM3_V msg_type ; Message Type GSM1_V force_to_standby ; Force to standby GSM1_V result_gmm ; Update result GSM3_V rau_timer ; Periodic RA update timer GSM3_V routing_area_identification ; Routing area identification GSM3_TV p_tmsi_signature 0x19 ; P-TMSI signature GSM4_TLV gmobile_identity 0x18 ; Allocated P-TMSI GSM4_TLV mobile_identity 0x23 ; MS identity GSM4_TLV receive_n_pdu_number_list 0x26 ; Receive N-PDU Number List GSM3_TV ready_timer 0x17 ; Negotiated READY timer value GSM3_TV gmm_cause 0x25 ; GMM cause GSM4_TLV t3302 0x2A ; T3302 value GSM2_T cell_notification 0x8C ; Cell Notification GSM4_TLV eqv_plmn_list 0x4A ; Equivalent PLMNs } MSG routing_area_update_complete uplink 10 ; Routing area update complete { GSM3_V msg_type ; Message Type GSM4_TLV receive_n_pdu_number_list 0x26 ; Receive N-PDU Number List } MSG routing_area_update_reject downlink 11 ; Routing area update reject { GSM3_V msg_type ; Message Type GSM3_V gmm_cause ; GMM cause GSM1_V force_to_standby ; Force to standby .0000 ; Spare half octet GSM4_TLV t3302 0x2A %REL99% ; T3302 value } MSG p_tmsi_reallocation_command downlink 16 ; P-TMSI reallocation command { GSM3_V msg_type ; Message Type GSM4_LV gmobile_identity ; Allocated P-TMSI GSM3_V routing_area_identification ; Routing area identification GSM1_V force_to_standby ; Force to standby .0000 ; Spare half octet GSM3_TV p_tmsi_signature 0x19 ; P-TMSI signature } MSG p_tmsi_reallocation_complete uplink 17 ; P-TMSI reallocation complete { GSM3_V msg_type ; Message Type } MSG authentication_and_ciphering_request downlink 18 ; Authentication and ciphering request { GSM3_V msg_type ; Message Type GSM1_V ciphering_algorithm ; Ciphering algorithm GSM1_V imeisv_request ; IMEISV request GSM1_V force_to_standby ; Force to standby GSM1_V a_c_reference_number ; A&C reference number GSM3_TV authentication_parameter_rand 0x21 ; Authentication parameter RAND GSM1_TV ciphering_key_sequence_number 0x08 ; Ciphering key sequence number } MSG authentication_and_ciphering_response uplink 19 ; Authentication and ciphering response { GSM3_V msg_type ; Message Type GSM1_V a_c_reference_number ; A&C reference number .0000 ; Spare half octet GSM3_TV authentication_parameter_sres 0x22 ; Authentication parameter SRES GSM4_TLV gmobile_identity 0x23 ; IMEISV } MSG authentication_and_ciphering_reject downlink 20 ; Authentication and ciphering reject { GSM3_V msg_type ; Message Type } MSG identity_request downlink 21 ; Identity request { GSM3_V msg_type ; Message Type GSM1_V identity_type_2 ; Identity type GSM1_V force_to_standby ; Force to standby } MSG identity_response uplink 22 ; Identity response { GSM3_V msg_type ; Message Type GSM4_LV gmobile_identity ; Mobile identity } MSG gmm_status both 32 ; GMM Status { GSM3_V msg_type ; Message Type GSM3_V gmm_cause ; GMM cause } MSG gmm_information downlink 33 ; GMM Information { GSM3_V msg_type ; Message Type GSM4_TLV full_network_name 0x43 ; Full name for network GSM4_TLV short_network_name 0x45 ; Short name for network GSM3_TV time_zone 0x46 ; Network time zone GSM3_TV time_zone_and_time 0x47 ; Network time and time zone GSM4_TLV lsa_identifier 0x48 %REL99% ; LSA identifier GSM4_TLV daylight_save_time 0x49 %REL99% ; Message Item }