FreeCalypso > hg > fc-magnetite
view cdg3/sap/sim.pdf @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 02 Jan 2020 05:38:26 +0000 |
parents | c15047b3d00d |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : sim.pdf ;*** Creation : Wed Mar 11 09:58:49 CST 2009 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : sim ;*** Document No. : 6147.108.99.113 ;*** Document Date : 2003-01-24 ;*** Document Status: BEING_PROCESSED ;*** Document Author: FK ;******************************************************************************** PRAGMA SRC_FILE_TIME "Fri Jul 4 11:26:04 2008" PRAGMA LAST_MODIFIED "2003-01-24" PRAGMA ID_AND_VERSION "6147.108.99.113" CONST MAX_STK_CMD 256 ; Maximum length of SIM Toolkit data CONST MAX_SIM_CMD 256 ; Maximum length of other SIM data CONST MAX_SIM_TRANSP 262 ; Maximum length of transparent SIM command CONST MAX_SIM_ATR 33 ; Maximum length of Answer to Reset CONST MAX_PIN_LEN 8 ; Maximum length of a PIN string CONST MAX_FILE_ID 64 ; Maximum possible number of IDs due to the coding scheme (1/4 of MAX_SIM_CMD!) CONST MAX_STK_PRF 20 ; Number of bytes in Terminal Profile CONST MAX_SRV_TBL 16 ; Number of bytes in SIM Service Table CONST MAX_LNG_PREF 5 ; Number of bytes to be read from EF(LP) CONST MAX_ECC 15 ; Number of bytes to be read from EF(ECC) CONST MAX_PREF_PLMN 240 ; Number of bytes to be read from EF(PLMNsel) CONST MAX_IMSI 9 ; Number of bytes to be read from EF(IMSI) CONST MAX_KC 8 ; Number of bytes of Cipherinh key KC and KCGPRS CONST MAX_LOCIGSM 11 ; Number of bytes to be read from EF(LOCI) CONST MAX_LOCIGPRS 14 ; Number of bytes to be read from EF(LOCIGPRS) CONST MAX_RAND 16 ; Number of bytes to be read rand CONST MAX_SRES 4 ; Number of bytes to be read sres CONST MAX_SIM_PLMN_SIZE 3 ; Number of bytes to be read for a single PLMN in SIM CONST MAX_AD 4 ; Number of bytes to be read from Administrative Data CONST MAX_TRMST 8 ; Number of bytes to be written to TRMST EF CONST SIM_CLASS_E_BUFFER_SIZE 1400 ; Size of the send buffer in SAT class e EXTERN CONST @p_gsmcom - SIM_ORIGINATING_ENTITY@ SIM_ORIGINATING_ENTITY ; mask for indicating the originating entity of a cause is SIM CONST MAX_CBMID_REC 255 ; Number of bytes to be read from EF(CBMID) VALTAB VAL_datafield VAL 0x3F00 SIM_MF "main file directory (M)" VAL 0x2FE2 SIM_ICCID "ICC identification (M)" VAL 0x2F05 SIM_ELP "extended language preference" VAL 0x6F3A SIM_ADN "abbreviated dialling numbers" VAL 0x6F3B SIM_FDN "fixed dialling numbers" VAL 0x6F3C SIM_SMS "short messages" VAL 0x6F3D SIM_CCP "capability configuration parameters" VAL 0x6F40 SIM_MSISDN "MSISDN" VAL 0x6F42 SIM_SMSP "short message service parameters" VAL 0x6F43 SIM_SMSS "short message status" VAL 0x6F44 SIM_LND "last number dialled" VAL 0x6F47 SIM_SMSR "short message status reports" VAL 0x6F49 SIM_SDN "service dialling numbers" VAL 0x6F4A SIM_EXT1 "extension 1" VAL 0x6F4B SIM_EXT2 "extension 2" VAL 0x6F4C SIM_EXT3 "extension 3" VAL 0x6F4D SIM_BDN "barred dialling numbers" VAL 0x6F4E SIM_EXT4 "extension 4" VAL 0x6F92 SIM_ORANGE_DYN2_FLAG "Orange Proprietary" VAL 0x6F98 SIM_ORANGE_CSP2 "Orange Proprietary" VAL 0x6F9C SIM_ORANGE_ACM2 "Orange Proprietary" VAL 0x6F9F SIM_ORANGE_DYN_FLAGS "Orange Proprietary" VAL 0x7F40 SIM_DF_ORANGE "Orange Proprietary" VAL 0x4F20 SIM_IMG "icon images" VAL 0x6F05 SIM_LP "language preference (M)" VAL 0x6F60 SIM_VI_HZ_PARAM "Viag home zone parameters" VAL 0x6F61 SIM_VI_HZ_CACHE_1 "Viag home zone Cache 1" VAL 0x6F62 SIM_VI_HZ_CACHE_2 "Viag home zone Cache 2" VAL 0x6F63 SIM_VI_HZ_CACHE_3 "Viag home zone Cache 3" VAL 0x6F64 SIM_VI_HZ_CACHE_4 "Viag home zone Cache 4" VAL 0x6F07 SIM_IMSI "international mobile subscriber identity (M)" VAL 0x6F20 SIM_KC "ciphering key Kc (M)" VAL 0x6F2C SIM_DCK "De-personalization Control Keys" VAL 0x6F30 SIM_PLMNSEL "preferred PLMN selector" VAL 0x6F31 SIM_HPLMN "HPLMN search period (M)" VAL 0x6F32 SIM_CNL "Co-operative Network List" VAL 0x6F37 SIM_ACMMAX "ACM maximum value" VAL 0x6F38 SIM_SST "SIM service table (M)" VAL 0x6F39 SIM_ACM "accumulated call meter" VAL 0x6F3E SIM_GID1 "group identifier level 1" VAL 0x6F3F SIM_GID2 "group identifier level 2" VAL 0x6F41 SIM_PUCT "price per unit and currency" VAL 0x6F45 SIM_CBMI "cell broadcast message identifier selection" VAL 0x6F46 SIM_SPN "service provider name" VAL 0x6F48 SIM_CBMID "cell broadcast message identifier for data download" VAL 0x6F4F SIM_ECCP "Extended capability configuration parameters" VAL 0x6F58 SIM_CMI "Comparison Method Information" VAL 0x6F74 SIM_BCCH "broadcast control channels (M)" VAL 0x6F78 SIM_ACC "access control classes (M)" VAL 0x6F7B SIM_FPLMN "forbidden PLMNs (M)" VAL 0x6F7E SIM_LOCI "location information (M)" VAL 0x6FAD SIM_AD "administrative data (M)" VAL 0x6FAE SIM_PHASE "phase identification (M)" VAL 0x6FB1 SIM_VGCS "voice group call service" VAL 0x6FB2 SIM_VGCSS "voice group call service status" VAL 0x6FB3 SIM_VBS "voice broadcast service" VAL 0x6FB4 SIM_VBSS "voice broadcast service status" VAL 0x6FB5 SIM_EMLPP "enhanced multi level pre-emption and priority" VAL 0x6FB6 SIM_AAEM "automatic answer for eMLPP service" VAL 0x6FB7 SIM_ECC "emergency call codes" VAL 0x6F50 SIM_CBMIR "cell broadcast message identifier range selection" VAL 0x6F51 SIM_NIA "network's indication of alerting" VAL 0x6F52 SIM_KCGPRS "ciphering key (GPRS)" VAL 0x6F53 SIM_LOCGPRS "location information (GPRS)" VAL 0x6F54 SIM_SUME "setup menu elements" VAL 0x6FC5 SIM_PNN "PLMN network name (3GPP release 4)" VAL 0x6FC6 SIM_OPL "operator PLMN list (3GPP release 4)" VAL 0x6F11 SIM_CPHS_VMW "voice message waiting (CPHS)" VAL 0x6F12 SIM_CPHS_SST "service string table (CPHS)" VAL 0x6F13 SIM_CPHS_CFF "call forwarding flags (CPHS)" VAL 0x6F14 SIM_CPHS_ONSTR "operator string name (CPHS)" VAL 0x6F15 SIM_CPHS_CSP "customer service profile (CPHS)" VAL 0x6F16 SIM_CPHS_CINF "CPHS information (CPHS)" VAL 0x6F17 SIM_CPHS_MBXN "mailbox numbers (CPHS)" VAL 0x6F18 SIM_CPHS_ONSHF "operator name shortform (CPHS)" VAL 0x6F19 SIM_CPHS_INFN "information numbers (CPHS)" VAL 0x4F30 SIM_SAI "SoLSA access indicator" VAL 0x4F31 SIM_SLL "SoLSA LSA list" VAL 0xEA01 SIM_CPHS_INFN2 "information numbers (CPHS) 2 (old SIMs)" VAL 0x7F66 SIM_DF_CING "1st level Directory(CINGULAR specific)" VAL 0x5F30 SIM_DF2_CING "2nd level Directory(CINGULAR specific)" VAL 0x4F34 SIM_CING_AHPLMN "Acting Home PLMN(CINGULAR specific)" VAL 0x6FD2 SIM_CING_TRMST "terminal support table " VAL 0x4F40 SIM_MEXE_ST "MExE Service table" VAL 0x4F41 SIM_ORPK "Operator Root Public Key" VAL 0x4F42 SIM_ARPK "Administrator Root Public Key" VAL 0x4F43 SIM_TPRPK "Third Party Root Public key" VAL 0x6F60 SIM_UCPS_ACTEC %REL99% "User controlled PLMN Selector with Access Technology" VAL 0x6F61 SIM_OCPS_ACTEC %REL99% "Operator controlled PLMN Selector with Access Technology" VAL 0x6F62 SIM_HPLMN_ACT %REL99% "HPLMN Selector with Access Technology" VAL 0x6F63 SIM_CPBCCH %REL99% "CPBCCH Information" VAL 0x6F64 SIM_INV_SCAN %REL99% "Investigation Scan" VAL 0x6F65 SIM_RPLMN_ACT %REL99% "RPLMN Last used Access Technology" VAL 0x6FCB SIM_CFIS "Call Forwarding Indication Status" VAL 0x6FC7 SIM_MBDN "Mailbox Dialling Numbers " VAL 0x6FCA SIM_MWIS "Message Waiting Indication Status" VAL 0x6FC9 SIM_MBI "Mailbox Identifier" VALTAB VAL_cause VAL 0b1000000011111111 SIM_NO_ERROR "No error (Status Code 9000, 91XX, 9FXX, 920X; USIM 63CX)" VAL 0b0000000000000001 SIM_CAUSE_NO_SELECT "No EF selected (SC 9400; USIM 6986)" VAL 0b0000000000000010 SIM_CAUSE_UNKN_FILE_ID "file id not found (SC 9404; USIM 6A82)" VAL 0b0000000000000011 SIM_CAUSE_EF_INVALID "EF invalidated (SC 9810; USIM 6283, 6984)" VAL 0b0000000000000100 SIM_CAUSE_ADDR_WRONG "Address of data invalid (SC 9402; USIM 6A83)" VAL 0b0000000000000101 SIM_CAUSE_CMD_INCONSIST "Command inconsistent with file type (SC 9408; USIM 6981)" VAL 0b0000000000000110 SIM_CAUSE_MAX_INCREASE "Increase: maximum reached (SC 9850)" VAL 0b0000000000000111 SIM_CAUSE_MEM_PROBLEM %REL99% "Sim memory problem when updating EF LOCI with data containing the TMSI value" VAL 0b0000000000001000 SIM_CAUSE_CLA_WRONG "Wrong class parameter (SC 6EXX)" VAL 0b0000000000001001 SIM_CAUSE_INS_WRONG "Unknown instruction code (SC 6DXX; USIM 6A81)" VAL 0b0000000000001010 SIM_CAUSE_P1P2_WRONG "Incorrect parameter P1, P2 (SC 6BXX; USIM 6A86. 6A88)" VAL 0b0000000000001011 SIM_CAUSE_P3_WRONG "Incorrect parameter P3 (SC 67XX; USIM 6282, 6A87)" VAL 0b0000000000001100 SIM_CAUSE_CHV_NOTSET "No CHV active (SC 9802; USIM 6982)" VAL 0b0000000000001101 SIM_CAUSE_CHV_VALIDATED "CHV already validated (SC 9808; USIM 6982)" VAL 0b0000000000001110 SIM_CAUSE_ACCESS_PROHIBIT "Access conditions not fulfilled (SC 9804; USIM 6985)" VAL 0b0000000000001111 SIM_CAUSE_OTHER_ERROR "Any other SIM error" VAL 0b0000000000010000 SIM_CAUSE_PUK1_BLOCKED "PUK1 blocked (SC 9840; USIM 63C0)" VAL 0b0000000000010001 SIM_CAUSE_PUK1_REMAIN1 "Wrong PUK1, 1 attempt left (SC 9804; USIM 63C1)" VAL 0b0000000000010010 SIM_CAUSE_PUK1_REMAIN2 "Wrong PUK1, 2 attempts left (USIM 63C2)" VAL 0b0000000000010011 SIM_CAUSE_PUK1_REMAIN3 "Wrong PUK1, 3 attempts left (USIM 63C3)" VAL 0b0000000000010100 SIM_CAUSE_PUK1_REMAIN4 "Wrong PUK1, 4 attempts left (USIM 63C4)" VAL 0b0000000000010101 SIM_CAUSE_PUK1_REMAIN5 "Wrong PUK1, 5 attempts left (USIM 63C5)" VAL 0b0000000000010110 SIM_CAUSE_PUK1_REMAIN6 "Wrong PUK1, 6 attempts left (USIM 63C6)" VAL 0b0000000000010111 SIM_CAUSE_PUK1_REMAIN7 "Wrong PUK1, 7 attempts left (USIM 63C7)" VAL 0b0000000000011000 SIM_CAUSE_PUK1_REMAIN8 "Wrong PUK1, 8 attempts left (USIM 63C8)" VAL 0b0000000000011001 SIM_CAUSE_PUK1_REMAIN9 "Wrong PUK1, 9 attempts left (USIM 63C9)" VAL 0b0000000000011010 SIM_CAUSE_PUK1_EXPECT "PUK1 required (SC 9804, 9808; USIM 6982, 6985)" VAL 0b0000000000011100 SIM_CAUSE_PIN1_BLOCKED "PIN1 blocked (SC 9840; USIM 63C0, 6983)" VAL 0b0000000000011101 SIM_CAUSE_PIN1_REMAIN1 "Wrong PIN1, 1 attempt left (USIM 63C1)" VAL 0b0000000000011110 SIM_CAUSE_PIN1_REMAIN2 "Wrong PIN1, 2 attempts left (USIM 63C2)" VAL 0b0000000000011111 SIM_CAUSE_PIN1_EXPECT "PIN1 required (SC 9804, 9808; USIM 6982, 6985)" VAL 0b0000000000100000 SIM_CAUSE_PUK2_BLOCKED "PUK2 blocked (SC 9840; USIM 63C0)" VAL 0b0000000000100001 SIM_CAUSE_PUK2_REMAIN1 "Wrong PUK2, 1 attempt left (USIM 63C1)" VAL 0b0000000000100010 SIM_CAUSE_PUK2_REMAIN2 "Wrong PUK2, 2 attempts left (USIM 63C2)" VAL 0b0000000000100011 SIM_CAUSE_PUK2_REMAIN3 "Wrong PUK2, 3 attempts left (USIM 63C3)" VAL 0b0000000000100100 SIM_CAUSE_PUK2_REMAIN4 "Wrong PUK2, 4 attempts left (USIM 63C4)" VAL 0b0000000000100101 SIM_CAUSE_PUK2_REMAIN5 "Wrong PUK2, 5 attempts left (USIM 63C5)" VAL 0b0000000000100110 SIM_CAUSE_PUK2_REMAIN6 "Wrong PUK2, 6 attempts left (USIM 63C6)" VAL 0b0000000000100111 SIM_CAUSE_PUK2_REMAIN7 "Wrong PUK2, 7 attempts left (USIM 63C7)" VAL 0b0000000000101000 SIM_CAUSE_PUK2_REMAIN8 "Wrong PUK2, 8 attempts left (USIM 63C8)" VAL 0b0000000000101001 SIM_CAUSE_PUK2_REMAIN9 "Wrong PUK2, 9 attempts left (USIM 63C9)" VAL 0b0000000000101010 SIM_CAUSE_PUK2_EXPECT "PUK2 required (SC 9804, 9808; USIM 6982, 6985)" VAL 0b0000000000101100 SIM_CAUSE_PIN2_BLOCKED "PIN2 blocked (SC 9840; USIM 63C0, 6983)" VAL 0b0000000000101101 SIM_CAUSE_PIN2_REMAIN1 "Wrong PIN2, 1 attempt left (USIM 63C1)" VAL 0b0000000000101110 SIM_CAUSE_PIN2_REMAIN2 "Wrong PIN2, 2 attempts left (USIM 63C2)" VAL 0b0000000000101111 SIM_CAUSE_PIN2_EXPECT "PIN1 required (SC 9804, 9808; USIM 6982, 6985)" VAL 0b0000000000110001 SIM_CAUSE_SAT_BUSY "SIM Application Toolkit busy (SC 9300)" VAL 0b0000000000110010 SIM_CAUSE_DNL_ERROR "SAT download error (SC 9EXX; USIM 62XX, 63XX)" VAL 0b0000000011110000 SIM_NO_ERR_FILE_ALREADY_SELECTED "No error File Already selected (Internal success indication)" VAL 0b1000000000000000 SIM_CAUSE_CARD_REMOVED "SIM card removed or exchanged" VAL 0b1100000000000000 SIM_CAUSE_PARAM_WRONG "Wrong parameter in primitive" VAL 0b1100000000000001 SIM_CAUSE_DRV_NOCARD "SIM driver error: no card detected" VAL 0b1100000000000010 SIM_CAUSE_DRV_NOINT "SIM driver error: no interrupt" VAL 0b1100000000000011 SIM_CAUSE_DRV_NOATR "SIM driver error: no answer to reset" VAL 0b1100000000000100 SIM_CAUSE_DRV_READ "SIM driver error: invalid response" VAL 0b1100000000000101 SIM_CAUSE_DRV_XMIT "SIM driver error: unsuccessful transmission" VAL 0b1100000000000110 SIM_CAUSE_DRV_OVF "SIM driver error: interrupt overflow" VAL 0b1100000000000111 SIM_CAUSE_DRV_LEN "SIM driver error: incorrect size of response" VAL 0b1100000000001000 SIM_CAUSE_DRV_CARDREJ "SIM driver error: card rejected (invalid properties)" VAL 0b1100000000001001 SIM_CAUSE_DRV_WAIT "SIM driver error: timeout" VAL 0b1100000000001010 SIM_CAUSE_DRV_ABNCASE1 "SIM driver error: abnormal case 1" VAL 0b1100000000001011 SIM_CAUSE_DRV_ABNCASE2 "SIM driver error: abnormal case 2" VAL 0b1100000000001100 SIM_CAUSE_DRV_RCVOVFL "SIM driver error: more than 256 bytes received" VAL 0b1100000000001101 SIM_CAUSE_DRV_HWFAIL "SIM driver error: hardware failure" VAL 0b1100000000001110 SIM_CAUSE_DRV_TEMPFAIL "SIM driver error: temprary failure, SIM reset required" VAL 0b1100000000001111 SIM_CAUSE_SIM_REINSERTED "SIM card reinserted" VALTAB VAL_op_mode VAL 0 OP_NORMAL_SIM "normal SIM card" VAL 1 OP_TEST_SIM "test SIM card" VALTAB VAL_pin_cnt VAL 0 CARD_BLOCKED "SIM card is blocked" VALTAB VAL_phase VAL 0 PHASE_2_AS_1_SIM "phase 2 card configured as phase 1 card" VAL 1 PHASE_1_SIM "phase 1 card" VAL 2 PHASE_2_SIM "phase 2 card" VAL 3 PHASE_2PLUS_SIM "phase 2+ card, TP download required" VALTAB VAL_hplmn VAL 10 HPLMN_DEF "default time period for home PLMN search" VALTAB VAL_pin_id VAL 1 PHASE_2_PIN_1 "phase 2 card, PIN 1" VAL 2 PHASE_2_PIN_2 "phase 2 card, PIN 2" VAL 3 PHASE_2_PUK_1 "phase 2 card, PUK 1" VAL 4 PHASE_2_PUK_2 "phase 2 card, PUK 2" VALTAB VAL_source VAL 0 SRC_MMI "from man machine interface" VAL 1 SRC_MM "from mobility management" VAL 2 SRC_SMS "from short message service" VAL 3 SRC_GMM "from GPRS mobile management" VAL 4 SRC_RR "from radio resource management" VALTAB VAL_mem_cap_avail VAL 0x00 SIM_SMS_MEM_FULL "SMS storage on SIM execeeded" VAL 0x01 SIM_SMS_MEM_AVAIL "SMS storage on SIM available" VAL 0xFF SIM_SMS_NO_MEM "SMS storage on SIM not present" VALTAB VAL_stk_pro_file VAL 0x01 SAT_TP1_PRF_DNL "Profile download (redundant definition)" VAL 0x02 SAT_TP1_SMS_DNL "SMS-PP data download" VAL 0x04 SAT_TP1_CB_DNL "Cell Broadcast data download" VAL 0x08 SAT_TP1_MENU_SEL "Menu selection" VAL 0x10 SAT_TP1_9E_XX "'9E XX' response code for SIM data download error" VAL 0x20 SAT_TP1_TIMER_EXP "Timer expiration (Class 3)" VAL 0x40 SAT_TP1_CC_USSD "USSD string data object supported in Call Control" VAL 0x80 SAT_TP1_CC_ON_REDIAL "Call Control by SIM always performed on automatic redial" VAL 0x01 SAT_TP2_CMD_RES "Command result (generic)" VAL 0x02 SAT_TP2_CC "Call Control by SIM" VAL 0x04 SAT_TP2_CC_CELL_ID "Cell Identity included in Call Control by SIM" VAL 0x08 SAT_TP2_MOSMC "MO SM Control by SIM (Class 3)" VAL 0x10 SAT_TP2_ALPHA_ID "Alpha identifier according to clause 9" VAL 0x20 SAT_TP2_UCS2_ENTRY "UCS2 entry supported" VAL 0x40 SAT_TP2_UCS2_DSPL "UCS2 display supported" VAL 0x80 SAT_TP2_DSPL_EXT "extended display length supported (Class 3)" VAL 0x01 SAT_TP3_DSPL_TXT "Proactive SIM: Display Text" VAL 0x02 SAT_TP3_GET_INKEY "Proactive SIM: Get Inkey" VAL 0x04 SAT_TP3_GET_INPUT "Proactive SIM: Get Input" VAL 0x08 SAT_TP3_MORE_TIME "Proactive SIM: More Time" VAL 0x10 SAT_TP3_PLAY_TONE "Proactive SIM: Play Tone" VAL 0x20 SAT_TP3_POLL_ITV "Proactive SIM: Poll Interval" VAL 0x40 SAT_TP3_POLL_OFF "Proactive SIM: Polling Off" VAL 0x80 SAT_TP3_REFRESH "Proactive SIM: Refresh" VAL 0x01 SAT_TP4_SEL_ITEM "Proactive SIM: Select Item" VAL 0x02 SAT_TP4_SEND_SMS "Proactive SIM: Send SM" VAL 0x04 SAT_TP4_SEND_SS "Proactive SIM: Send SS" VAL 0x08 SAT_TP4_SEND_USSD "Proactive SIM: Send USSD (Class 3)" VAL 0x10 SAT_TP4_SETUP_CALL "Proactive SIM: Set up Call" VAL 0x20 SAT_TP4_SETUP_MENU "Proactive SIM: Set up Menu" VAL 0x40 SAT_TP4_PLI_PLMN_IMEI "Proactive SIM: Provide Local Informaton (PLMN, Cell ID, IMEI)" VAL 0x80 SAT_TP4_PLI_NMR "Proactive SIM: Provide Local Informaton (NMR)" VAL 0x01 SAT_TP5_EVENT_LIST "Proactive SIM: Set up Event List (Class 3)" VAL 0x02 SAT_TP5_MT_CALL "Event: Moblile Terminated Call (Class 3)" VAL 0x04 SAT_TP5_CALL_CONN "Event: Call connected (Class 3)" VAL 0x08 SAT_TP5_CALL_DISC "Event: Call disconnected (Class 3)" VAL 0x10 SAT_TP5_LOC_STATUS "Event: Location status (Class 3)" VAL 0x20 SAT_TP5_USER_ACT "Event: User activity (Class 3)" VAL 0x40 SAT_TP5_SCR_AVAIL "Event: Idle screen available (Class 3)" VAL 0x80 SAT_TP5_CDR_STATUS "Event: Card reader status (Class a)" VAL 0x01 SAT_TP6_LANG_SEL "Event: Language Selection (Class 3)" VAL 0x02 SAT_TP6_BROWS_TERM "Event: Browser Termination (Class c)" VAL 0x04 SAT_TP6_DATA_AVAIL "Event: Data available (Class e)" VAL 0x08 SAT_TP6_CHANNEL_STAT "Event: Channel status (Class e)" VAL 0x01 SAT_TP7_PW_ON_CD "Proactive SIM: Power on Card (Class a)" VAL 0x02 SAT_TP7_PW_OFF_CD "Proactive SIM: Power off Card (Class a)" VAL 0x04 SAT_TP7_PF_CD_ADPU "Proactive SIM: Perform Card ADPU (Class a)" VAL 0x08 SAT_TP7_GET_CDR_STATUS "Proactive SIM: Get Card Reader Status (Class a)" VAL 0x10 SAT_TP7_GET_CDR_IDENT "Proactive SIM: Get Card Reader Identifier (Class a)" VAL 0x01 SAT_TP8_TMNG_ST "Proactive SIM: Timer Management (start, stop) (Class 3)" VAL 0x02 SAT_TP8_TMNG_VAL "Proactive SIM: Timer Management (get current value) (Class 3)" VAL 0x04 SAT_TP8_PLI_DTT "Proactive SIM: Provide Local Information (date, time, tz) (Class 3)" VAL 0x08 SAT_TP8_BIN_GET_INKEY "Binary choice in Get Inkey (Class 3)" VAL 0x10 SAT_TP8_IDLE_TXT "Proactive SIM: Set up Idle Mode Text (Class 3)" VAL 0x20 SAT_TP8_AT_CMD "Proactive SIM: Run AT command (Class b)" VAL 0x40 SAT_TP8_AI2_SETUP_CALL "2nd alpha identifier in Set up Call (Class 3)" VAL 0x80 SAT_TP8_CCP2_CC "2nd capability configuration parameter with Call Control (Class 3)" VAL 0x01 SAT_TP9_SUST_DSPL_TXT "Sustained Display Text (Class 3)" VAL 0x02 SAT_TP9_DTMF_CMD "Send DTMF Command (Class 3)" VAL 0x04 SAT_TP9_BCCH_COD "BCCH coding according to subclause 12.19 (Class 3)" VAL 0x08 SAT_TP9_PLI_LANG "Proactive SIM: Provide Local Information (Language) (Rel. 99)" VAL 0x10 SAT_TP9_PLI_TIMING_ADV "Proactive SIM: Provide Local Information (Timing Adv ance) (Rel. 99)" VAL 0x20 SAT_TP9_LANG_NOTIFY "Proactive SIM: Language Notification (Class 3)" VAL 0x40 SAT_TP9_LAUNCH_BROWSER "Proactive SIM: Launch Browser (Class c)" VAL 0x01 SAT_TP10_SFTKEY_SEL_ITEM "Soft key support for SELECT ITEM" VAL 0x02 SAT_TP10_SFTKEY_SETUP_MENU "Soft key support for SET UP MENU" VAL 0xFF SAT_TP11_MAX_NR_SFTKEY "Maximum number of soft keys available" VAL 0x01 SAT_TP12_OPEN_CHANNEL "Proactive SIM: OPEN CHANNEL (Class e)" VAL 0x02 SAT_TP12_CLOSE_CHANNEL "Proactive SIM: CLOSE CHANNEL (Class e)" VAL 0x04 SAT_TP12_RECEIVE_DATA "Proactive SIM: RECEIVE DATA (Class e)" VAL 0x08 SAT_TP12_SEND_DATA "Proactive SIM: SEND DATA (Class e)" VAL 0x10 SAT_TP12_GET_CHANNEL_STAT "Proactive SIM: GET CHANNEL STATUS (Class e)" VAL 0x01 SAT_TP13_CSD_SUPP_BY_ME "CSD supported by ME (Class e)" VAL 0x02 SAT_TP13_GPRS_SUPP_BY_ME "GPRS supported by ME (Class e)" VAL 0xE0 SAT_TP13_NR_OF_CHAN_SUPP "Number of channels supported by ME (Class e)" VAL 0x1F SAT_TP14_NR_OF_CHAR_DSPL_DWN "Number of characters supported down the ME display" VAL 0x80 SAT_TP14_SCRN_SIZE_PARAM "Screen sizing parameters supported by ME" VAL 0x7F SAT_TP15_NR_OF_CHAR_DSPL_ACRS "Number of characters supported across the ME display" VAL 0x80 SAT_TP15_VAR_SIZE_FONT "Variable size fonts supported" VAL 0x01 SAT_TP16_DSPL_RESIZE "Display can be resized" VAL 0x02 SAT_TP16_TEXT_WRAP "Text wrapping supported" VAL 0x04 SAT_TP16_TEXT_SCROLL "Text scrolling supported" VAL 0xE0 SAT_TP16_WIDTH_RDCT_MENU "Width reduction when in Menu" VAL 0x01 SAT_TP17_BEARER_IND_SUPP_TCP "Bearer independent protocol supported TCP (Class e)" VAL 0x02 SAT_TP17_BEARER_IND_SUPP_UDP "Bearer independent protocol supported UPD (Class e)" VAL 0x0F SAT_TP19_PROT_VERS "Protocol version coded as TIA/EIA 136-123" VALTAB VAL_proc VAL 0x00 SIM_INITIALISATION "initialisation" VAL 0x01 SIM_FDN_ENABLE "FDN enabling" VAL 0x02 SIM_FDN_DISABLE "FDN disabling" VAL 0x03 SIM_SELECT "SIM selection" VALTAB VAL_func VAL 0x00 SIM_NO_OPERATION "card is invalid" VAL 0x01 SIM_ADN_ENABLED "normal GSM operation, ADN enabled" VAL 0x02 SIM_FDN_ENABLED "restricted GSM operation, FDN enabled" VAL 0x05 SIM_ADN_BDN_ENABLED "normal GSM operation, ADN and BDN enabled" VAL 0x06 SIM_FDN_BDN_ENABLED "restricted GSM operation, FDN and BDN enabled" VALTAB VAL_download_sms VAL 0 DOWNLOAD_SMS_NO "No support of download SMS" VAL 1 DOWNLOAD_SMS_YES "Support of download SMS" VALTAB VAL_access_acm VAL 0 ACCESS_ALWAYS "No PIN is needed" VAL 1 ACCESS_PIN_1 "PIN 1 is needed" VAL 2 ACCESS_PIN_2 "PIN 2 is needed" VALTAB VAL_mmi_pro_file VAL 0x80 SIM_MMI_ADN "MMI ADN support, if set" VAL 0x40 SIM_MMI_FDN "MMI FDN support, if set" VAL 0x20 SIM_MMI_BDN "MMI BDN support, if set" VALTAB VAL_synccs VAL 1 SYNC_START_CALL "Start present checks if needed during calls" VAL 2 SYNC_STOP_CALL "Stop present checks if running" VAL 3 SYNC_DEACTIVATE "Deactivate SIM card" VAL 4 SYNC_MM_FINISHED_READING "MM has finished reading of the EFs" VAL 5 SYNC_MMI_FINISHED_READING "MMI has finished reading of the EFs" VALTAB VAL_sim_command VAL 0 SIM_TRANSP_CMD "Transparent SIM Command" VAL 1 SIM_READ_BINARY "Read Binary Command" VAL 2 SIM_READ_RECORD "Read Record Command" VAL 3 SIM_UPDATE_BINARY "Update Binary Command" VAL 4 SIM_UPDATE_RECORD "Update Record Command" VAL 5 SIM_STATUS "Status Command" VAL 6 SIM_GET_RESPONSE "Get Response Command" VALTAB VAL_sw1 VAL 0x90 SW1_SUCCESS "normal ending of the command: SW2 = '00'" VAL 0x91 SW1_SUCCESS_EXTRA_INF "ditto, with extra data from proactiv SIM for ME: SW2 = lgth" VAL 0x9E SW1_DATA_LGTH_BY_ERR "SW2 gives the length of respose in case of SIM downl. error" VAL 0x9F SW1_SUCCESS_DATA_AVAIL "SW2 gives the length of (SIM) response data" VAL 0x93 SW1_SAT_BUSY "no command execution now, further normal commands allowed" VAL 0x92 SW1_MEMORY_MANAGEMENT "two cases possible depending on SW2" VAL 0x94 SW1_REFRNCG_MANAGEMENT "four cases possible depending on SW2" VAL 0x98 SW1_SECURTY_MANAGEMENT "six cases possible depending on SW2" VAL 0x67 SW1_ERR_INCORRECT_P3 "incorrect parameter P3" VAL 0x6B SW1_ERR_INCOR_P1_OR_P2 "incorrect parameter P1 or P2" VAL 0x6D SW1_ERR_UNKNOWN_INSTR "unknown instruction code given in the command" VAL 0x6E SW1_ERR_INSTR_CLA "wrong instruction class given in the command" VAL 0x6F SW1_ERR_DIAG_OR_AUTHEN "technical problem with no diagnostic given" VAL 0x00 SW2_NORMAL "normal ending of the command (SW1 = '00')" VAL 0x00 SW2_256_BYTES_LGTH "SW2 gives the lengths of 256 bytes of information" VAL 0x40 SW2_MEMORY_PROBLEM "memory problem: in connection with SW1 = '92'" VAL 0x02 SW2_NO_EF_SELECTED "no elementary file selected: in connection with SW1 = '94'" VAL 0x02 SW2_OUT_OF_RANGE "invalid adress: in connection with SW1 = '94'" VAL 0x04 SW2_FILE_ID_PATT_NFOUND "file ID or pattern not found: in connection with SW1 = '94'" VAL 0x08 SW2_FILE_INCON_WTH_CMD "file inconsistent with cmd: in connection with SW1 = '94'" VAL 0x02 SW2_NO_CHV_INIT "no CHV initialized: in connection with SW1 = '98'" VAL 0x04 SW2_ACC_FAIL "in connection with SW1 = '98': (1) acces condition not fullfilled; (2) CHV verify unsuccessful, at least one attempt left; (3) UNBLOCK CHV verify unsuccessful, at least one attempt left; (4) authentication failed" VAL 0x08 SW2_CNTR_TO_CHV_STAT "in contradiction with CHV status: in conn. with SW1 = '98'" VAL 0x10 SW2_CNTR_TO_INVALID_STAT "in contradiction with invalidation status: in conn. with SW1 = '98'" VAL 0x40 SW2_ACC_FAIL_NO_ATTEMTP "in connection with SW1 = '98': (1) CHV verify unsuccessful, no attempt left; (2) UNBLOCK CHV verify unsuccessful, no attempt left; (3) CHV blocked; (4) UNBLOCK CHV blocked" VAL 0x50 SW2_NO_INCREASE_PERF "increase cannot be performed, Max value reached: in conn. with SW1 = '98'" VALTAB VAL_smsr_mem_cap VAL 0 SIM_SMSR_DISABLE "EF(SMSR) disabled on SIM" VAL 1 SIM_SMSR_ENABLE "EF(SMSR) enabled on SIM" VALTAB VAL_fu_rsc VAL 0 SIM_FU_ERROR "ME is unable to perform the command (SAT result = 20)" VAL 1 SIM_FU_SUCCESS "file update is performed successfully (SAT result = 0)" VAL 2 SIM_FU_SUCC_ADD "file update is performed with additional files read (SAT result = 3)" VALTAB VAL_dti_conn VAL 0 SIM_DTI_UNKNOWN "Unknown DTI link status" VAL 1 SIM_DTI_CONNECT "Connect DTI link to SIM" VAL 2 SIM_DTI_DISCONNECT "Disconnect DTI link from SIM" VALTAB VAL_con_type VAL 1 SIM_CON_TYPE_UDP "send and expect UDP datagrams" VAL 2 SIM_CON_TYPE_IP "send and expect IP packets" VAL 3 SIM_CON_TYPE_SERIAL "send and expect serial data" VALTAB VAL_local_ip VAL 0x00000000 SIM_IP_LOCAL_DYNAMIC "SIM requests IP address from UDP" VALTAB VAL_event_data_avail VAL 0 SIM_EVENT_DISABLE "do not use this event" VAL 1 SIM_EVENT_ENABLE "use this event" VAL 0xFF SIM_KEEP_ALIVE "reserved" VALTAB VAL_release_time VAL 0 SIM_NO_AUTO_RELEASE "do not use release timer" VALTAB VAL_cla VAL 0xA0 GSM_CLASS "GSM instruction class" VALTAB VAL_ins_code VAL 0xA4 SIM_INS_SELECT "Select Instruction" VAL 0xF2 SIM_INS_STATUS "Status Instruction" VAL 0xB0 SIM_INS_READ_BINARY "Read Binary Instruction" VAL 0xD6 SIM_INS_UPDATE_BINARY "Update Binary Instruction" VAL 0xB2 SIM_INS_READ_RECORD "Read Record Instruction" VAL 0xDC SIM_INS_UPDATE_RECORD "Update Record Instruction" VAL 0xA2 SIM_INS_SEEK "Seek Instruction" VAL 0x32 SIM_INS_INCREASE "Increase Instruction" VAL 0x20 SIM_INS_VERIFY_CHV "Verify Chv Instruction" VAL 0x24 SIM_INS_CHANGE_CHV "Change Chv Instruction" VAL 0x26 SIM_INS_DISABLE_CHV "Disable Chv Instruction" VAL 0x28 SIM_INS_ENABLE_CHV "Ensable Chv Instruction" VAL 0x2C SIM_INS_UNBLOCK_CHV "Unblock Chv Instruction" VAL 0x04 SIM_INS_INVALIDATE "Invalidate Instruction" VAL 0x44 SIM_INS_REHABILITATE "Rehabilitate Instruction" VAL 0x88 SIM_INS_RUN_GSM_ALGTH "Run GSM Algorithm Instruczion" VAL 0xC0 SIM_INS_GET_RESPONSE "Get Response Instruction" VAL 0x10 SIM_INS_TERMINAL_PROFILE "Terminal Profile Instruction" VAL 0xC2 SIM_INS_ENVELOPE "Envelope Instruction" VAL 0x12 SIM_INS_FETCH "Fetch Instruction" VAL 0x14 SIM_INS_TERMINAL_RESPONSE "Terminal Response Instruction" VALTAB VAL_bip_conn VAL 0 SIM_BIP_UNKNOWN "unknown BIP channel status" VAL 1 SIM_BIP_OPEN_CHANNEL "Open bearer independent protocol channel" VAL 2 SIM_BIP_CLOSE_CHANNEL "Close bearer independent protocol channel" VAL 4 SIM_BIP_CHANNEL_RESUMED "BIP channel is resumed" VAL 8 SIM_BIP_CHANNEL_SUSPENDED "BIP channel is suspended" VALTAB VAL_dti_direction VAL 0 SIM_DTI_NORMAL "DTI used normally" VAL 1 SIM_DTI_INVERTED "DTI is inverted" VALTAB VAL_cust_mode VAL 0 SIM_CUST_MODE_NORM "Normal Behaviour" VAL 1 SIM_CUST_MODE_1 "Customisation Value 1" VALTAB VAL_user_accepts VAL 0 SIM_USER_REJECTS "User Rejected" VAL 1 SIM_USER_ACCEPTS "User Accepted" VALTAB VAL_sim_num VAL 0 SIM_NUM_0 "Auto Select" VAL 1 SIM_NUM_1 "Select SIM 1" VAL 2 SIM_NUM_2 "Select SIM 2" VALTAB VAL_df_level2 VAL 0x5F3C SIM_DF_MEXE "DF for MEXE (subdirectory of 'gsm')" VAL 0x5F50 SIM_DF_GRAPHICS "icon graphics directory (subdirectory of 'telecom')" VAL 0x5F70 SIM_DF_SOLSA "SoLSA directory (subdirectory of 'gsm')" VALTAB VAL_df_level1 VAL 0x7F10 SIM_DF_TELECOM "telecom directory" VAL 0x7F20 SIM_DF_GSM "gsm directory (M)" VAL 0x7F21 SIM_DF_1800 "dcs 1800 directory" VAL 0x7F43 SIM_DF_VI "Viag directory" VAR datafield "data field identification" S VAL @p_sim - VAL_datafield@ VAR cause "error code" S VAL @p_sim - VAL_cause@ VAR length "length of data field" B VAR max_length "Maximum of length" B VAR offset "offset of data field" S VAR pin "personal identification number" B VAR old_pin "personal identification number" B VAR new_pin "personal identification number" B VAR record "record number" B VAR max_record "Maximum record number" B VAR unblock_key "unblocking key" B VAR rand "authentication parameter rand" B VAR cksn "ciphering key sequence number" B VAR sres "authentication parameter Sres" B VAR kc "authentication parameter Kc" B VAR op_mode "operation mode" B VAL @p_sim - VAL_op_mode@ VAR c_field "length of imsi" B VAR field "imsi" B VAR c_acc "length of access control classes" B VAR acc "access control classes" B VAR c_bcch "Length of bcch information" B VAR bcch "bcch information" B VAR c_kc "Length of data field" B VAR c_forb "length of forbidden PLMN list" B VAR forb "Forbidden PLMN list" B VAR pin_cnt "PIN counter" B VAL @p_sim - VAL_pin_cnt@ VAR pin2_cnt "PIN 2 counter" B VAL @p_sim - VAL_pin_cnt@ VAR puk_cnt "PUK counter" B VAL @p_sim - VAL_pin_cnt@ VAR puk2_cnt "PUK 2 counter" B VAL @p_sim - VAL_pin_cnt@ VAR phase "phase of SIM card" B VAL @p_sim - VAL_phase@ VAR hplmn "HPLMN search period" B VAL @p_sim - VAL_hplmn@ VAR pin_id "PIN identification" B VAL @p_sim - VAL_pin_id@ VAR source "source process" S VAL @p_sim - VAL_source@ VAR req_id "used to uniquely identify requests to SIM" B VAR tp_mr "message reference" B VAR mem_cap_avail "memory capacity available flag" B VAL @p_sim - VAL_mem_cap_avail@ VAR c_loc "Length of Location Information" B VAR stk_pro_file "SIM toolkit profile" B VAL @p_sim - VAL_stk_pro_file@ VAR ec_code "Emergency call codes" B VAR pref_lang "preferred languages" B VAR l_cmd "command length" S VAR o_cmd "command offset" S VAR cmd "command data" B VAR proc "procedure type" B VAL @p_sim - VAL_proc@ VAR func "SIM card functionality" B VAL @p_sim - VAL_func@ VAR sim_serv "SIM service table" B VAR cell_identity "cell identity" S VAR download_sms "Download SMS Flag" B VAL @p_sim - VAL_download_sms@ VAR access_acm "Access ACM" B VAL @p_sim - VAL_access_acm@ VAR access_acmmax "Access ACMMAX" B VAL @p_sim - VAL_access_acm@ VAR access_puct "Access PUCT" B VAL @p_sim - VAL_access_acm@ VAR trans_data "Transparent data content" B VAR linear_data "Linear fixed data content" B VAR mmi_pro_file "MMI profile" B VAL @p_sim - VAL_mmi_pro_file@ VAR synccs "Synchronisation Cause" B VAL @p_sim - VAL_synccs@ VAR sim_command "SIM Command" B VAL @p_sim - VAL_sim_command@ VAR p1 "P1 Parameter" B VAR p2 "P2 Parameter" B VAR p3 "P3 Parameter" B VAR sw1 "SW1 Parameter" B VAL @p_sim - VAL_sw1@ VAR sw2 "SW2 Parameter" B VAL @p_sim - VAL_sw1@ VAR smsr_mem_cap "Indicator for short message status report storage" B VAL @p_sim - VAL_smsr_mem_cap@ VAR val_nr "valid entries of a file ID list" S VAR fu_rsc "result code for SIM_FILE_UPDATE_IND" S VAL @p_sim - VAL_fu_rsc@ VAR att_status "GPRS IMSI attach status" B VAR loc "Location Information" B VAR dti_conn "connection qualifier" B VAL @p_sim - VAL_dti_conn@ VAR dti_direction "DTI direction" B VAL @p_sim - VAL_dti_direction@ VAR entity_name "DTI entity name" L VAR link_id "DTI link identifier" L VAR con_type "connection type" B VAL @p_sim - VAL_con_type@ VAR local_ip "local IP address" L VAL @p_sim - VAL_local_ip@ VAR destination_ip "destination IP address" L VAR bip_ch_id "BIP channel identifier" B VAR event_data_avail "data available event" B VAL @p_sim - VAL_event_data_avail@ VAR release_time "link release timeout" L VAL @p_sim - VAL_release_time@ VAR destination_port "destination port number" S VAR general_result "general result code" B VAR add_info_result "additional information on result code" B VAR cla "class of instruction" B VAL @p_sim - VAL_cla@ VAR ins_code "instruction code" B VAL @p_sim - VAL_ins_code@ VAR le "length of response" B VAR atr "Answer to Reset" B VAR bip_conn "bip connection qualifier" B VAL @p_sim - VAL_bip_conn@ VAR act_hplmn "Acting HPLMN" B VAR ad "Contents of Administrative Data file" B VAR trmst_file "Terminal Support Table EF" B VAR cust_mode "Customisation Mode" B VAL @p_sim - VAL_cust_mode@ VAR user_accepts "User Response" B VAL @p_sim - VAL_user_accepts@ VAR sim_num "SIM Interface Identifier" B VAL @p_sim - VAL_sim_num@ VAR c_rec "Length of records in EF(CBMID)" B VAR rec "Records in the EF(CBMID)" B VAR pref_plmn_list_sz "List size of the preferred PLMN. Size =0 means that preferred PLMN does not present." S VAR u_ctl_plmn_sel_actech_list_sz %REL99% "Size of the PLMN list 'User controlled PLMN Selector with Access Technology'. Size =0 means that plmn list is not present." S VAR o_ctl_plmn_sel_actech_list_sz %REL99% "Size of the PLMN list 'Operator controlled PLMN Selector with Access Technology'. Size =0 means that plmn list is not present." S VAR df_level1 "First level directory" S VAL @p_sim - VAL_df_level1@ VAR df_level2 "Second level directory" S VAL @p_sim - VAL_df_level2@ VAR v_df_level2 "valid flag" B VAR ef_indicator "EF Indicator" B COMP imsi_field "international mobile subscriber identity" { c_field ; length of imsi field [MAX_IMSI] ; imsi } COMP loc_info "location information" { c_loc ; length of location information loc [MAX_LOCIGSM] ; location information } COMP acc_ctrl "access control classes" { c_acc ; length of access control classes acc [2] ; access control classes } COMP bcch_inf "BCCH information" { c_bcch ; Length of bcch information bcch [16] ; bcch information } COMP kc_n "Kc and cipher key sequence number" { c_kc ; Length of data field kc [MAX_KC+1] ; Kc and ciphering key sequence number } COMP forb_plmn "Forbidden PLMN list" { c_forb ; length of forbidden PLMN list forb [12] ; Forbidden PLMN list } COMP stk_cmd "SIM toolkit command" { l_cmd ; command length o_cmd ; command offset cmd [MAX_STK_CMD] ; command data } COMP gprs_loc_info "location information" { c_loc ; length of location information loc [MAX_LOCIGPRS] ; location information } COMP cbmid_rec "This structure contains the CBMID records" { rec [1..MAX_CBMID_REC] ; Primitive structure element item } COMP path_info "Path information" { df_level1 ; Primitive structure element item < () df_level2 > ; Primitive structure element item } COMP file_info "File Information for FILE UPDATE" { datafield ; Primitive structure element item < () path_info > ; Primitive structure element item } ; SIM_READ_REQ 0x80004005 ; SIM_READ_CNF 0x80000005 ; SIM_UPDATE_REQ 0x80014005 ; SIM_UPDATE_CNF 0x80010005 ; SIM_READ_RECORD_REQ 0x80024005 ; SIM_READ_RECORD_CNF 0x80020005 ; SIM_UPDATE_RECORD_REQ 0x80044005 ; SIM_UPDATE_RECORD_CNF 0x80040005 ; SIM_INCREMENT_REQ 0x80084005 ; SIM_INCREMENT_CNF 0x80080005 ; SIM_VERIFY_PIN_REQ 0x80094005 ; SIM_VERIFY_PIN_CNF 0x80090005 ; SIM_CHANGE_PIN_REQ 0x800A4005 ; SIM_CHANGE_PIN_CNF 0x800A0005 ; SIM_DISABLE_PIN_REQ 0x800B4005 ; SIM_DISABLE_PIN_CNF 0x800B0005 ; SIM_ENABLE_PIN_REQ 0x800C4005 ; SIM_ENABLE_PIN_CNF 0x800C0005 ; SIM_UNBLOCK_REQ 0x800D4005 ; SIM_UNBLOCK_CNF 0x800D0005 ; SIM_AUTHENTICATION_REQ 0x800E4005 ; SIM_AUTHENTICATION_CNF 0x800E0005 ; SIM_MMI_INSERT_IND 0x800F0005 ; SIM_MM_INSERT_IND 0x80100005 ; SIM_REMOVE_IND 0x80110005 ; SIM_MM_UPDATE_REQ 0x800F4005 ; SIM_SYNC_REQ 0x80104005 ; SIM_SYNC_CNF 0x80120005 ; SIM_ACTIVATE_REQ 0x80114005 ; SIM_ACTIVATE_CNF 0x80130005 ; SIM_SMS_INSERT_IND 0x80140005 ; SIM_TOOLKIT_REQ 0x80124005 ; SIM_TOOLKIT_RES 0x80134005 ; SIM_TOOLKIT_IND 0x80150005 ; SIM_TOOLKIT_CNF 0x80160005 ; SIM_ACTIVATE_IND 0x80170005 ; SIM_MM_INFO_IND 0x80180005 ; SIM_ACCESS_REQ 0x80144005 ; SIM_ACCESS_CNF 0x80190005 ; SIM_FILE_UPDATE_IND 0x801A0005 ; SIM_FILE_UPDATE_RES 0x80154005 ; SIM_GMM_INSERT_IND 0x801B0005 ; SIM_GMM_UPDATE_REQ 0x80164005 ; SIM_DTI_REQ 0x80174005 ; SIM_DTI_CNF 0x801C0005 ; SIM_BIP_REQ 0x80184005 ; SIM_BIP_CNF 0x801D0005 ; SIM_BIP_CONFIG_REQ 0x80194005 ; SIM_BIP_CONFIG_CNF 0x801E0005 ; SIM_DTI_BIP_IND 0x801F0005 ; SIM_EVENTLIST_REQ 0x801A4005 ; SIM_EVENTLIST_CNF 0x80200005 ; SIM_TEST_REQ 0x80210005 ; SIM_TEST_CNF 0x801B4005 ; SIM_REFRESH_USER_RES 0x80074005 PRIM SIM_READ_REQ 0x80004005 { source ; source offset ; offset datafield ; data field req_id ; request identifier length ; length max_length ; Max length < () path_info > ; Path Information } PRIM SIM_READ_CNF 0x80000005 { cause ; error code req_id ; request identifier length ; Data trans_data [MAX_SIM_CMD] ; Received data } PRIM SIM_UPDATE_REQ 0x80014005 { source ; source offset ; offset datafield ; data field req_id ; request identifier < () path_info > ; Path Information length ; Data trans_data [MAX_SIM_CMD] ; send data } PRIM SIM_UPDATE_CNF 0x80010005 { cause ; error code req_id ; request identifier } PRIM SIM_READ_RECORD_REQ 0x80024005 { source ; source record ; record number length ; length datafield ; data field req_id ; request identifier < () path_info > ; Path Information } PRIM SIM_READ_RECORD_CNF 0x80020005 { cause ; error code req_id ; request identifier max_record ; max record number length ; Data linear_data [MAX_SIM_CMD] ; send data } PRIM SIM_UPDATE_RECORD_REQ 0x80044005 { source ; source record ; record req_id ; request identifier datafield ; data field length ; Data < () path_info > ; Path Information linear_data [MAX_SIM_CMD] ; send data } PRIM SIM_UPDATE_RECORD_CNF 0x80040005 { cause ; error code req_id ; request identifier } PRIM SIM_INCREMENT_REQ 0x80084005 { source ; source datafield ; data field req_id ; request identifier length ; Data < () path_info > ; Path information linear_data [MAX_SIM_CMD] ; send data } PRIM SIM_INCREMENT_CNF 0x80080005 { cause ; error code req_id ; request identifier length ; Data linear_data [MAX_SIM_CMD] ; send data } PRIM SIM_VERIFY_PIN_REQ 0x80094005 { source ; source pin [MAX_PIN_LEN] ; personal identity number pin_id ; pin identification } PRIM SIM_VERIFY_PIN_CNF 0x80090005 { cause ; error code pin_id ; pin identification pin_cnt ; pin count puk_cnt ; puk count pin2_cnt ; pin 2 count puk2_cnt ; puk 2 count } PRIM SIM_CHANGE_PIN_REQ 0x800A4005 { source ; source old_pin [MAX_PIN_LEN] ; old personal identity number new_pin [MAX_PIN_LEN] ; new personal identity number pin_id ; pin identification } PRIM SIM_CHANGE_PIN_CNF 0x800A0005 { cause ; error code pin_id ; pin identification pin_cnt ; pin count puk_cnt ; puk count pin2_cnt ; pin 2 count puk2_cnt ; puk 2 count } PRIM SIM_DISABLE_PIN_REQ 0x800B4005 { source ; source pin [MAX_PIN_LEN] ; personal identity number } PRIM SIM_DISABLE_PIN_CNF 0x800B0005 { cause ; error code pin_cnt ; pin count puk_cnt ; puk count pin2_cnt ; pin 2 count puk2_cnt ; puk 2 count } PRIM SIM_ENABLE_PIN_REQ 0x800C4005 { source ; source pin [MAX_PIN_LEN] ; personal identity number } PRIM SIM_ENABLE_PIN_CNF 0x800C0005 { cause ; error code pin_cnt ; pin count puk_cnt ; puk count pin2_cnt ; pin 2 count puk2_cnt ; puk 2 count } PRIM SIM_UNBLOCK_REQ 0x800D4005 { source ; source unblock_key [MAX_PIN_LEN] ; unkblocking key pin [MAX_PIN_LEN] ; personal identity number pin_id ; personal identity number identification } PRIM SIM_UNBLOCK_CNF 0x800D0005 { cause ; error code pin_id ; personal identity number identification pin_cnt ; pin count puk_cnt ; puk count pin2_cnt ; pin 2 count puk2_cnt ; puk 2 count } PRIM SIM_AUTHENTICATION_REQ 0x800E4005 { source ; source req_id ; request identifier cksn ; ciphering key sequence number rand [MAX_RAND] ; Random number } PRIM SIM_AUTHENTICATION_CNF 0x800E0005 { req_id ; request identifier sres [MAX_SRES] ; Sres kc [MAX_KC] ; Kc } PRIM SIM_MMI_INSERT_IND 0x800F0005 { func ; sim card functionality sim_serv [MAX_SRV_TBL] ; sim service table imsi_field ; international mobile subscriber identity phase ; phase access_acm ; access conditions ACM access_acmmax ; access conditions ACMMAX access_puct ; access conditions PUCT cbmid_rec ; cbmid ad [1..MAX_AD] ; administrative data } PRIM SIM_MM_INSERT_IND 0x80100005 { ad [1..MAX_AD] ; administrative data imsi_field ; international mobile subscriber identity loc_info ; location info acc_ctrl ; access control bcch_inf ; bcch information kc_n ; last Kc value forb_plmn ; forbidden plmns phase ; phase hplmn ; hplmn time < () act_hplmn [MAX_SIM_PLMN_SIZE] > ; acting hplmn pref_plmn_list_sz ; size of the preferred plmn list u_ctl_plmn_sel_actech_list_sz %REL99% ; Size of the PLMN list 'User controlled PLMN Selector with Access Technology'. o_ctl_plmn_sel_actech_list_sz %REL99% ; Size of the PLMN list 'Operator controlled PLMN Selector with Access Technology'. } PRIM SIM_REMOVE_IND 0x80110005 { cause ; Error code } PRIM SIM_MM_UPDATE_REQ 0x800F4005 { loc_info ; location info bcch_inf ; bcch information forb_plmn ; forbidden plmns cksn ; ciphering key sequence number kc [MAX_KC] ; Kc cell_identity ; cell identity ef_indicator ; EF indicator } PRIM SIM_SYNC_REQ 0x80104005 { synccs ; Sync cause } PRIM SIM_SYNC_CNF 0x80120005 { cause ; Error code } PRIM SIM_ACTIVATE_REQ 0x80114005 { proc ; Procedure mmi_pro_file ; Mmi profile stk_pro_file [MAX_STK_PRF] ; SIM Toolkit Profile cust_mode ; Customisation Mode sim_num ; SIM Interface Identifier < () trmst_file [MAX_TRMST] > ; Terminal Support Table } PRIM SIM_ACTIVATE_CNF 0x80130005 { cause ; error code pin_cnt ; pin count puk_cnt ; puk count pin2_cnt ; pin 2 count puk2_cnt ; puk 2 count ec_code [MAX_ECC] ; emergency call codes pref_lang [MAX_LNG_PREF] ; preferred language sim_num ; SIM Number atr [1..MAX_SIM_ATR] ; ATR data } PRIM SIM_SMS_INSERT_IND 0x80140005 { phase ; Phase tp_mr ; Message reference mem_cap_avail ; Memory capacity available flag download_sms ; Download SMS flag smsr_mem_cap ; Status report storage capability } PRIM SIM_TOOLKIT_REQ 0x80124005 { source ; source req_id ; request identifier stk_cmd ; sim toolkit command } PRIM SIM_TOOLKIT_RES 0x80134005 { stk_cmd ; sim toolkit command } PRIM SIM_TOOLKIT_IND 0x80150005 { stk_cmd ; sim toolkit command } PRIM SIM_TOOLKIT_CNF 0x80160005 { cause ; error code req_id ; request identifier stk_cmd ; sim toolkit command } PRIM SIM_ACTIVATE_IND 0x80170005 { cause ; error code pin_cnt ; pin count puk_cnt ; puk count pin2_cnt ; pin 2 count puk2_cnt ; puk 2 count ec_code [MAX_ECC] ; Emergency call codes pref_lang [MAX_LNG_PREF] ; Preferred language atr [1..MAX_SIM_ATR] ; ATR data } PRIM SIM_MM_INFO_IND 0x80180005 { datafield ; Changed EF name } PRIM SIM_ACCESS_REQ 0x80144005 { source ; source datafield ; datafield req_id ; request identifier sim_command ; sim command p1 ; P1 p2 ; P2 p3 ; P3 trans_data [0..MAX_SIM_TRANSP] ; Transparent data } PRIM SIM_ACCESS_CNF 0x80190005 { cause ; error req_id ; request identifier sw1 ; sw1 sw2 ; sw2 trans_data [0..MAX_SIM_CMD] ; Transparent data } PRIM SIM_FILE_UPDATE_IND 0x801A0005 { val_nr ; Number of file IDs file_info [MAX_FILE_ID] ; Primitive Item } PRIM SIM_FILE_UPDATE_RES 0x80154005 { source ; Source fu_rsc ; Result Code } PRIM SIM_GMM_INSERT_IND 0x801B0005 { op_mode ; operation mode imsi_field ; international mobile subscriber identity loc_info ; location info gprs_loc_info ; gprs location info acc_ctrl ; access control kc_n ; last GPRS Kc value phase ; phase } PRIM SIM_GMM_UPDATE_REQ 0x80164005 { gprs_loc_info ; GPRS location info cksn ; ciphering key sequence number kc [MAX_KC] ; Kc att_status ; IMSI attach status } PRIM SIM_DTI_REQ 0x80174005 { link_id ; DTI link identifier dti_conn ; connection qualifier dti_direction ; DTI direction entity_name ; DTI entity name } PRIM SIM_DTI_CNF 0x801C0005 { link_id ; DTI link identifier dti_conn ; connection qualifier } PRIM SIM_BIP_REQ 0x80184005 { bip_ch_id ; Primitive Item bip_conn ; Primitive Item release_time ; Primitive Item add_info_result ; Primitive Item general_result ; Primitive Item } PRIM SIM_BIP_CNF 0x801D0005 { bip_ch_id ; Primitive Item bip_conn ; Primitive Item } PRIM SIM_BIP_CONFIG_REQ 0x80194005 { local_ip ; Primitive Item destination_ip ; Primitive Item destination_port ; Primitive Item con_type ; Primitive Item } PRIM SIM_BIP_CONFIG_CNF 0x801E0005 { } PRIM SIM_DTI_BIP_IND 0x801F0005 { link_id ; Primitive Item dti_conn ; Primitive Item bip_ch_id ; Primitive Item bip_conn ; Primitive Item } PRIM SIM_EVENTLIST_REQ 0x801A4005 { event_data_avail ; data available event } PRIM SIM_EVENTLIST_CNF 0x80200005 { event_data_avail ; data available event } PRIM SIM_TEST_REQ 0x80210005 { cla ; class of instruction ins_code ; instruction code p1 ; Parameter P1 p2 ; Parameter P2 le ; length of response stk_cmd ; test data } PRIM SIM_TEST_CNF 0x801B4005 { sw1 ; status byte 1 sw2 ; status byte 2 stk_cmd ; test data } PRIM SIM_REFRESH_USER_RES 0x80074005 { user_accepts ; Primitive Item stk_cmd ; Primitive Item }