view components/mfw-tcs3 @ 629:3231dd9b38c1

armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents ad7f986afae3
children
line wrap: on
line source

# Building mfw.lib from TCS3/LoCosto source

CFLAGS="-me -mt -o -pw2 -x -mw"
CPPFLAGS=

make_version mfw
cfile_plain mfw_version.c

# Defines

CPPFLAGS=-DCCDTABLES_EXTERN
CPPFLAGS="$CPPFLAGS -DOPTION_MULTITHREAD"
CPPFLAGS="$CPPFLAGS -DNEW_FRAME"
CPPFLAGS="$CPPFLAGS -DNEW_ENTITY"
CPPFLAGS="$CPPFLAGS -D_TARGET_"
CPPFLAGS="$CPPFLAGS -DSHARED_VSI"
CPPFLAGS="$CPPFLAGS -DALR"
CPPFLAGS="$CPPFLAGS -DFF_HOMEZONE"
CPPFLAGS="$CPPFLAGS -DFF_MMI_SAT_ICON"
CPPFLAGS="$CPPFLAGS -DFF_MMI_SMS_DYNAMIC"
CPPFLAGS="$CPPFLAGS -DFF_CPHS"
CPPFLAGS="$CPPFLAGS -D_TMS470"
CPPFLAGS="$CPPFLAGS -DUART"
CPPFLAGS="$CPPFLAGS -DFF_ATI"
CPPFLAGS="$CPPFLAGS -DNWARN"
CPPFLAGS="$CPPFLAGS -DFF_EM_MODE"
CPPFLAGS="$CPPFLAGS -DAT_INTERPRETER"
CPPFLAGS="$CPPFLAGS -DUSE_L1FD_FUNC_INTERFACE"

if [ "$SRVC" != 0 ]
then
	CPPFLAGS="$CPPFLAGS -DFAX_AND_DATA"
	if [ "$SRVC" = 1 ]
	then
		CPPFLAGS="$CPPFLAGS -DFF_FAX"
	fi
	CPPFLAGS="$CPPFLAGS -DUSE_L2FD_FUNC_INTERFACE"
fi

CPPFLAGS="$CPPFLAGS -DSRVC=$SRVC"
CPPFLAGS="$CPPFLAGS -DMMI=2"
CPPFLAGS="$CPPFLAGS -DMFW"
CPPFLAGS="$CPPFLAGS -DMMI_HOMEZONE_ENABLED"
CPPFLAGS="$CPPFLAGS -DFF_MMI_SAT_ICON"
CPPFLAGS="$CPPFLAGS -DFF_MMI_SMS_DYNAMIC"

if [ "$GPRS" = 1 ]
then
	CPPFLAGS="$CPPFLAGS -DMMI_GPRS_ENABLED"
fi

CPPFLAGS="$CPPFLAGS -DMMI_EM_ENABLED"
CPPFLAGS="$CPPFLAGS -DNO_ASCIIZ"

case "$UI_CONFIG" in
	bigcolor)
		CPPFLAGS="$CPPFLAGS -DCOLOURDISPLAY"
		CPPFLAGS="$CPPFLAGS -DLSCREEN"
		;;
	bigbw)
		CPPFLAGS="$CPPFLAGS -DLSCREEN"
		;;
	84x48)
		;;
	*)
		echo "Error: UI_CONFIG=$UI_CONFIG setting not understood" 1>&2
		exit 1
esac

CPPFLAGS="$CPPFLAGS -DINT_PHONEBOOK"
CPPFLAGS="$CPPFLAGS -DNEW_EDITOR"
CPPFLAGS="$CPPFLAGS -DTRGT_G23"
CPPFLAGS="$CPPFLAGS -DAUS_CONDAT_TYPE_PORTING"
CPPFLAGS="$CPPFLAGS -DPHONEBOOK_EXTENSION"

if [ "$GPRS" = 1 ]
then
	CPPFLAGS="$CPPFLAGS -DGPRS"
fi

CPPFLAGS="$CPPFLAGS -DSIM_TOOLKIT"
CPPFLAGS="$CPPFLAGS -DCHIPSET=$CHIPSET"
CPPFLAGS="$CPPFLAGS -DBOARD=41"

# Includes

CPPFLAGS="$CPPFLAGS -I$SRC/$CONDAT/com/inc"
CPPFLAGS="$CPPFLAGS -I$SRC/$GPF/inc"
CPPFLAGS="$CPPFLAGS -I$SRC/$CONDAT/com/include"
CPPFLAGS="$CPPFLAGS -I../../$CDGINC"
CPPFLAGS="$CPPFLAGS -I$SRC/$ACI/aci"
CPPFLAGS="$CPPFLAGS -I$SRC/$ACI/ksd"
CPPFLAGS="$CPPFLAGS -I$SRC/ui3/atb"
CPPFLAGS="$CPPFLAGS -I$SRC/ui3/mfw"
CPPFLAGS="$CPPFLAGS -I$SRC/$ACI/aci_ext"
CPPFLAGS="$CPPFLAGS -I$SRC/$ACI/aci_dti_mng"
CPPFLAGS="$CPPFLAGS -I.."
CPPFLAGS="$CPPFLAGS -I../config"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/riviera"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_app"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/abb"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/armio"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/clkm"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/conf"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/dma"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/dsp_dwnld"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/inth"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/memif"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/rhea"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/security"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/spi"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/timer"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/uart"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/ulpd"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/system"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/include"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/services"

# MFW source modules

SRCDIR=$SRC/ui3/mfw

cfile_str2ind $SRCDIR/ti1_key.c
cfile_str2ind $SRCDIR/ti1_tmr.c
cfile_str2ind $SRCDIR/mfw_mfw.c
cfile_str2ind $SRCDIR/mfw_win.c
cfile_str2ind $SRCDIR/mfw_kbd.c
cfile_str2ind $SRCDIR/mfw_tim.c
cfile_str2ind $SRCDIR/mfw_mnu.c
cfile_str2ind $SRCDIR/mfw_icn.c
cfile_str2ind $SRCDIR/mfw_ext.c
cfile_str2ind $SRCDIR/mfw_cm.c
cfile_str2ind $SRCDIR/mfw_ss.c
cfile_str2ind $SRCDIR/mfw_nm.c
cfile_str2ind $SRCDIR/mfw_nma.c
cfile_str2ind $SRCDIR/mfw_sim.c
cfile_str2ind $SRCDIR/mfw_sima.c
cfile_str2ind $SRCDIR/mfw_sms.c
cfile_str2ind $SRCDIR/mfw_phb.c
cfile_str2ind $SRCDIR/mfw_mme.c
cfile_str2ind $SRCDIR/mfw_cb.c
cfile_str2ind $SRCDIR/mfw_acie.c
cfile_str2ind $SRCDIR/mfw_sat.c
cfile_str2ind $SRCDIR/mfw_lng.c
cfile_str2ind $SRCDIR/mfw_cnvt.c
cfile_str2ind $SRCDIR/mfw_cphs.c
cfile_str2ind $SRCDIR/mfw_str.c
cfile_str2ind $SRCDIR/mfw_ffs.c

if [ "$GPRS" = 1 ]
then
	cfile_str2ind $SRCDIR/mfw_gprs.c
fi

cfile_str2ind $SRCDIR/mfw_band.c
cfile_str2ind $SRCDIR/mfw_em.c
cfile_str2ind $SRCDIR/mfw_utils.c
cfile_str2ind $SRCDIR/mfw_aud.c
cfile_str2ind $SRCDIR/mfw_td.c

# ATB source modules

SRCDIR=$SRC/ui3/atb

cfile_str2ind $SRCDIR/ATBCommon.c
cfile_str2ind $SRCDIR/ATBDisplay.c
cfile_str2ind $SRCDIR/ATBEditor.c
cfile_str2ind $SRCDIR/ATBPb.c
cfile_str2ind $SRCDIR/ATBPbFS.c
cfile_str2ind $SRCDIR/ATBPbGI.c