FreeCalypso > hg > fc-magnetite

view scripts/mk-component.sh @ 629:3231dd9b38c1

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 0198ac1e1a4f
children
line wrap: on
line source

#!/bin/sh

if [ $# -lt 1 -o $# -gt 2 ]
then
	echo "usage: $0 component-lib [flavor]" 1>&2
	exit 1
fi

LIBNAME="$1"

if [ -n "$2" ]
then
	recipe_file="components/$1-$2"
else
	recipe_file="components/$1"
fi

if [ ! -f "$recipe_file" ]
then
	echo "Error: $recipe_file not found" 1>&2
	exit 1
fi

if [ -z "$BUILD_DIR" ]
then
	echo "Error: BUILD_DIR= must be passed via environment" 1>&2
	exit 1
fi

set -e

mkdir -p $BUILD_DIR/$LIBNAME

# beginning of the Makefile
echo "all:	$LIBNAME.lib" > $BUILD_DIR/$LIBNAME/Makefile
echo >> $BUILD_DIR/$LIBNAME/Makefile

# shell functions to be used in the recipes

make_version() {
	case $# in
	    1)
		echo "$1_version.c:" >> $BUILD_DIR/$LIBNAME/Makefile
		echo "	../../scripts/make-version.sh $1 > $1_version.c" \
			>> $BUILD_DIR/$LIBNAME/Makefile
		;;
	    2)
		echo "$2_version.c:" >> $BUILD_DIR/$LIBNAME/Makefile
		echo "	../../scripts/make-version.sh $1 > $2_version.c" \
			>> $BUILD_DIR/$LIBNAME/Makefile
		;;
	    *)
		echo "Error: make_version takes 1 or 2 arguments" 1>&2
		exit 1
		;;
	esac
	echo >> $BUILD_DIR/$LIBNAME/Makefile
}

asm_file() {
	if [ $# != 1 ]
	then
		echo "Error: asm_file takes 1 argument" 1>&2
		exit 1
	fi
	objname=`basename "$1" .s`.obj
	helpers/makeline dep $objname "$1" >> $BUILD_DIR/$LIBNAME/Makefile
	helpers/makeline cmd ../../toolwrap/asm470 ${ASMFLAGS} "$1" '$@' \
		>> $BUILD_DIR/$LIBNAME/Makefile
	echo >> $BUILD_DIR/$LIBNAME/Makefile
	OBJS="$OBJS $objname"
}

cfile_plain() {
	if [ $# != 1 ]
	then
		echo "Error: cfile_plain takes 1 argument" 1>&2
		exit 1
	fi
	objname=`basename "$1" .c`.obj
	helpers/makeline dep $objname "$1" >> $BUILD_DIR/$LIBNAME/Makefile
	case "$objname" in
		*[A-Z]*)
			helpers/makeline cmd rm -f '$@' \
				>> $BUILD_DIR/$LIBNAME/Makefile
			;;
	esac
	helpers/makeline cmd ../../toolwrap/cl470 -q -c ${CFLAGS} ${CPPFLAGS} \
		"$1" >> $BUILD_DIR/$LIBNAME/Makefile
	case "$objname" in
		*[A-Z]*)
			objname_lc=`echo $objname | tr A-Z a-z`
			helpers/makeline cmd mv $objname_lc $objname \
				>> $BUILD_DIR/$LIBNAME/Makefile
			;;
	esac
	echo >> $BUILD_DIR/$LIBNAME/Makefile
	OBJS="$OBJS $objname"
}

cfile_str2ind() {
	if [ $# != 1 ]
	then
		echo "Error: cfile_str2ind takes 1 argument" 1>&2
		exit 1
	fi
	if [ "$USE_STR2IND" = 1 ]
	then
		objname=`basename "$1" .c`.obj
		pp_name=`echo $1 | sed -e 's/\.c$/.pp/' | tr A-Z a-z`
		pp__name=`echo $1 | sed -e 's/\.c$/.pp_/' | tr A-Z a-z`
		helpers/makeline dep $objname "$1" \
			>> $BUILD_DIR/$LIBNAME/Makefile
		case "$objname" in
			*[A-Z]*)
				helpers/makeline cmd rm -f '$@' \
					>> $BUILD_DIR/$LIBNAME/Makefile
				;;
		esac
		helpers/makeline cmd ../../toolwrap/cl470 -q -po -p? -x \
			${CPPFLAGS} "$1" >> $BUILD_DIR/$LIBNAME/Makefile
		helpers/makeline cmd ../../toolwrap/str2ind -a \
			-t ../str2ind.tab -l ../str2ind.log \
			-f "$pp_name" >> $BUILD_DIR/$LIBNAME/Makefile
		helpers/makeline cmd ../../toolwrap/cl470 -q -c ${CFLAGS} \
			"$pp__name" >> $BUILD_DIR/$LIBNAME/Makefile
		helpers/makeline cmd @rm -f "$pp_name" \
			>> $BUILD_DIR/$LIBNAME/Makefile
		helpers/makeline cmd @rm -f "$pp__name" \
			>> $BUILD_DIR/$LIBNAME/Makefile
		case "$objname" in
			*[A-Z]*)
				objname_lc=`echo $objname | tr A-Z a-z`
				helpers/makeline cmd mv $objname_lc $objname \
					>> $BUILD_DIR/$LIBNAME/Makefile
				;;
		esac
		echo >> $BUILD_DIR/$LIBNAME/Makefile
		OBJS="$OBJS $objname"
	else
		cfile_plain "$1"
	fi
}

cfile_symlink() {
	if [ $# != 1 ]
	then
		echo "Error: cfile_symlink takes 1 argument" 1>&2
		exit 1
	fi
	localcopy=`basename "$1"`
	echo "$localcopy:" >> $BUILD_DIR/$LIBNAME/Makefile
	echo "	ln -s $1 ." >> $BUILD_DIR/$LIBNAME/Makefile
	echo >> $BUILD_DIR/$LIBNAME/Makefile
	cfile_plain $localcopy
}

# invoke the recipe

SRC=../../src
OBJS=
. "$recipe_file"

# finish the Makefile

helpers/makeline dep $LIBNAME.lib ${OBJS} >> $BUILD_DIR/$LIBNAME/Makefile
echo '	../../toolwrap/ar470 r $@ $^' >> $BUILD_DIR/$LIBNAME/Makefile
echo >> $BUILD_DIR/$LIBNAME/Makefile
echo 'clean:' >> $BUILD_DIR/$LIBNAME/Makefile
echo '	rm -f *.obj *.lib *.c' >> $BUILD_DIR/$LIBNAME/Makefile