FreeCalypso > hg > fc-magnetite

view src/aci2/aci/ati_fchg.c @ 629:3231dd9b38c1

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 96c1d047b3c6
children
line wrap: on
line source

/*
 * The non-standard FreeCalypso-added AT commands implemented in this module
 * expose the API of FreeCalypso battery charging driver FCHG.
 */

#ifndef ATI_FCHG_C
#define ATI_FCHG_C

#include "aci_all.h"

#include <ctype.h>
#include <string.h>

#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "aci_io.h"
#include "aci_cmd.h"
#include "l4_tim.h"
#include "line_edit.h"
#include "aci_lst.h"

#include "pcm.h"
#include "audio.h"
#include "aci.h"
#include "rx.h"
#include "pwr.h"
#include "l4_tim.h"

#ifdef GPRS
#ifdef DTI
#include "dti.h"
#include "dti_conn_mng.h"
#include "dti_cntrl_mng.h"
#endif /* DTI */
#include "gaci.h"
#include "gaci_cmh.h"
#include "gaci_cmd.h"
#endif  /* GPRS */

#include "aci_mem.h"
#include "aci_prs.h"

#include "ati_int.h"

#ifndef _SIMULATION_
#include "ffs/ffs.h"
#endif

#ifdef FF_ATI_BAT

#include "typedefs.h"
#include "gdd.h"
#include "bat.h"

#include "ati_bat.h"

#endif /*FF_ATI_BAT*/

#include "rv/rv_defined_swe.h"     // for RVM_FCHG_SWE

#ifdef RVM_FCHG_SWE
#include "fchg/fchg_api.h"

/* AT%CBC - customized alternative to standard AT+CBC */
GLOBAL T_ATI_RSLT atPercentCBC ( char *cl, UBYTE srcId )
{
	struct fchg_user_state fchg;

	TRACE_FUNCTION("atPercentCBC()");
	if (fchg_get_current_state(&fchg) != RV_OK)
		return ATI_FAIL;
	sprintf(g_sa, "%%CBC: %d,%d,%d", fchg.chg_state, fchg.batt_mv,
		fchg.batt_percent);
	io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
	return ATI_CMPL;
}

/* AT@CHG - manual control of battery charging */
GLOBAL T_ATI_RSLT atAtCHG ( char *cl, UBYTE srcId )
{
	enum fchg_user_charge_ctrl ctrl;

	TRACE_FUNCTION("atAtCHG()");
	cl = parse(cl, "D", &ctrl);
	if (!cl)
		return ATI_FAIL;
	if (fchg_user_charge_control(ctrl) == RV_OK)
		return ATI_CMPL;
	else
		return ATI_FAIL;
}

#endif /* RVM_FCHG_SWE */

/* AT%VBAT - retrieve VBAT measurement, independent of FCHG */
GLOBAL T_ATI_RSLT atPercentVBAT ( char *cl, UBYTE srcId )
{
	extern USHORT *csf_return_adc(void);
	USHORT *adc_conversion;

	TRACE_FUNCTION("atPercentVBAT()");
	adc_conversion = csf_return_adc();
	sprintf(g_sa, "%%VBAT: %u", adc_conversion[0]);
	io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
	return ATI_CMPL;
}

#endif /* ATI_FCHG_C */