view src/aci2/aci/psa_mmip.c @ 629:3231dd9b38c1

armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 93999a60b835
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  PSA_MMI
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module defines the processing functions for the
|             primitives send to the protocol stack adapter by the 
|             man machine interface.
+----------------------------------------------------------------------------- 
*/ 

#ifndef PSA_MMIP_C
#define PSA_MMIP_C
#endif

#include "aci_all.h"

/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"

#ifdef FAX_AND_DATA
#include "aci_fd.h"
#endif    /* of #ifdef FAX_AND_DATA */

#include "aci.h"
#include "psa.h"
#include "psa_sms.h"
#include "psa_mmi.h"
#include "psa_mm.h"
#include "cmh.h"
#ifdef SIM_TOOLKIT
#include "psa_cc.h"     /* includes defs used in CMH_SAT.H */
#include "psa_sat.h"
#include "psa_sim.h"
#include "cmh_sat.h"
#endif /* of SIM_TOOLKIT */
#include "cmh_sms.h"
#include "cmh_mmi.h"
#include "hl_audio_drv.h"

/*==== CONSTANTS ==================================================*/


/*==== TYPES ======================================================*/


/*==== EXPORT =====================================================*/


/*==== VARIABLES ==================================================*/


/*==== FUNCTIONS ==================================================*/

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_MMIP                |
|                                 ROUTINE : psa_mmi_keypad_ind      |
+-------------------------------------------------------------------+

  PURPOSE : processes the MMI_KEYPAD_IND primitive send by MMI.

*/

GLOBAL const void psa_mmi_keypad_ind ( T_MMI_KEYPAD_IND *mmi_keypad_ind )
{
  TRACE_FUNCTION ("psa_mmi_keypad_ind()");

  /* update shared parameter and notify ACI */  
  mmiShrdPrm.keyCd = mmi_keypad_ind -> key_code;
  mmiShrdPrm.keySt = mmi_keypad_ind -> key_stat;

  TRACE_EVENT_P2("Key pressed: code: %d, status: %d", mmi_keypad_ind->key_code, mmi_keypad_ind->key_stat);
  cmhMMI_keyIndication();
  
  /* free the primitive buffer */  
  PFREE (mmi_keypad_ind);

}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_MMIP                |
|                                 ROUTINE : psa_mmi_cbch_ind        |
+-------------------------------------------------------------------+

  PURPOSE : processes the MMI_CBCH_IND primitive send by MMI.

*/

GLOBAL const void psa_mmi_cbch_ind ( T_MMI_CBCH_IND *mmi_cbch_ind )
{
  TRACE_FUNCTION ("psa_mmi_cbch_ind()");

  if (mmShrdPrm.regStat EQ RS_FULL_SRV)
  {
    cmhSMS_CBMIndication (mmi_cbch_ind);
  }

  /*
   *-------------------------------------------------------------------
   * free the primitive buffer
   *-------------------------------------------------------------------
   */  
  PFREE (mmi_cbch_ind);
}

#ifdef SIM_TOOLKIT
/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_MMIP                |
|                                 ROUTINE : psa_mmi_cbch_dnl_ind    |
+-------------------------------------------------------------------+

  PURPOSE : processes the MMI_CBCH_DWNLD_IND primitive send by MMI.

*/

GLOBAL const void psa_sat_cbch_dnl_ind ( T_MMI_SAT_CBCH_DWNLD_IND *mmi_cbch_dnl_ind )
{
  TRACE_FUNCTION ("psa_sat_cbch_dnl_ind()");

  /*
   *-----------------------------------------------------------------
   * check if message should be transfered to SIM for SAT module
   *-----------------------------------------------------------------
   */
  if (psaSIM_ChkSIMSrvSup( SRV_DtaDownlCB )) /* check if servive allocated and enabled */
  {

    cmhSAT_DatDwnLdCB ( mmi_cbch_dnl_ind -> cbch_msg,
                        mmi_cbch_dnl_ind -> cbch_len); /* build envelope */
  }

  /*
   *-------------------------------------------------------------------
   * free the primitive buffer
   *-------------------------------------------------------------------
   */  
  PFREE (mmi_cbch_dnl_ind);
}
#endif

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_MMIP                |
|                                 ROUTINE : psa_mmi_rxlev_ind       |
+-------------------------------------------------------------------+

  PURPOSE : processes the MMI_RXLEV_IND primitive send by MMI.

*/

GLOBAL const void psa_mmi_rxlev_ind ( T_MMI_RXLEV_IND *mmi_rxlev_ind )
{

  TRACE_FUNCTION ("psa_mmi_rxlev_ind()");

  /* update shared parameter and notify ACI */  
  mmiShrdPrm.rxLev = mmi_rxlev_ind -> rxlev;

  cmhMMI_rxIndication();

  /* free the primitive buffer */  
  PFREE (mmi_rxlev_ind);

}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_MMIP                |
|                                 ROUTINE : psa_mmi_battery_ind     |
+-------------------------------------------------------------------+

  PURPOSE : processes the MMI_BATTERY_IND primitive send by MMI.

*/

GLOBAL const void psa_mmi_battery_ind ( T_MMI_BATTERY_IND *mmi_battery_ind )
{
  TRACE_FUNCTION ("psa_mmi_battery_ind()");

  /* update shared parameter and notify ACI */  
  mmiShrdPrm.btLev = mmi_battery_ind -> volt;

  cmhMMI_btIndication();

  /* free the primitive buffer */  
  PFREE (mmi_battery_ind);
}

#ifdef BTE_MOBILE
/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_MMIP                |
|                                 ROUTINE : psa_mmi_keypad_ind      |
+-------------------------------------------------------------------+

  PURPOSE : processes the MMI_KEYPAD_IND primitive send by MMI.

*/

#if defined (MFW)
extern mfw_bt_cb_notify_rxd(void);
#endif

GLOBAL const void psa_mmi_bt_cb_notify_ind (T_MMI_BT_CB_NOTIFY_IND *mmi_bt_cb_notify_ind )
{
  TRACE_FUNCTION ("psa_mmi_bt_cb_notify_ind()");

  /*
  ** Do something!
  */
  #if defined (MFW)
  mfw_bt_cb_notify_rxd();
  #endif

  /* free the primitive buffer */  
  PFREE (mmi_bt_cb_notify_ind);

}
#endif


#ifndef VOCODER_FUNC_INTERFACE
/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_MMIP                |
|                                 ROUTINE : psa_mmi_keypad_ind      |
+-------------------------------------------------------------------+

  PURPOSE : processes the MMI_KEYPAD_IND primitive send by MMI.

*/

GLOBAL const void psa_mmi_tch_vocoder_cfg_con(T_MMI_TCH_VOCODER_CFG_CON *mmi_tch_vocoder_cfg_con)
{
  TRACE_FUNCTION("psa_mmi_tch_vocoder_cfg_con()");
  hl_drv_vocoder_enabled();
  PFREE (mmi_tch_vocoder_cfg_con);
}
#endif 

/*==== EOF =========================================================*/