FreeCalypso > hg > fc-magnetite

view src/cs/layer1/dyn_dwl_include/l1_dyn_dwl_defty.h @ 629:3231dd9b38c1

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 50a15a54801e
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software
 * L1_DYN_DWL_DEFTY.H
 *
 *        Filename l1_dyn_dwl_defty.h
 *  Copyright 2004 (C) Texas Instruments
 *
 ************* Revision Controle System Header *************/
#if(L1_DYN_DSP_DWNLD==1)

#ifndef _L1_DYN_DWL_DEFTY_H_
#define _L1_DYN_DWL_DEFTY_H_

#include "l1_dyn_dwl_const.h"

/***************************************************************************************/
/* Dynamic download L1A structure to store dynamic download L1A global variables       */
/***************************************************************************************/
typedef struct
{
  UWORD32 signal_code_vect[MAX_NUM_OF_PATCH_IDS];
  UWORD32 num_of_elem;
}T_FIFO_DYN_DWNLD ;
typedef struct
{
 UWORD8  state;
 UWORD16 num_patches_installed;
 UWORD16 patch_id[MAX_NUM_OF_PATCH_IDS];
 UWORD16 num_of_elem_to_copy;
 UWORD16 next_patch_id[MAX_NUM_OF_PATCH_IDS];
 BOOL    semaphore_vect[MAX_NUM_OF_SEMAPHORES];
 BOOL    melody0_E2_flag_activated;
 BOOL    melody1_E2_flag_activated; 
 UWORD16 dsp_trace_level_copy;
 BOOL    trace_flag_blocked;
 UWORD16 num_of_primitives;
 BOOL    dedicated_stop_flag;
 T_FIFO_DYN_DWNLD waiting_patch_fifo;
}T_L1A_DYN_DWNLD_GLOBAL;

/***************************************************************************************/
/* Dynamic DSP L1A-L1S structure...                                                    */
/***************************************************************************************/
typedef struct
{
  BOOL start;
  BOOL stop;
} T_DYN_DWNLD_TASK_COMMAND;

/***************************************************************************************/
/* Dynamic DSP download HISR - L1A structure...                                        */
/***************************************************************************************/
typedef struct
{
  BOOL  restart;
} T_DYN_DWNLD_HISR_COMMAND;

typedef struct
{
  UWORD16 num_of_elem;
  UWORD32 address[MAX_NUM_OF_PATCH_IDS];
} T_DYN_DWNLD_HISR_UN_PARAM;

typedef struct
{
  UWORD32 start_MCU_copy_address[MAX_NUM_OF_PATCH_IDS];
  UWORD16 size_of_dwnld_area;
  UWORD16 start_of_dwnld_area; 
  UWORD16 num_of_elem;
  UWORD32 address_to_install[MAX_NUM_OF_PATCH_IDS];
  UWORD16 crc[MAX_NUM_OF_PATCH_IDS];
  UWORD16 size_array[MAX_NUM_OF_PATCH_IDS];
}T_DYN_DWNLD_HISR_CPY_PARAM;

typedef struct
{
  T_DYN_DWNLD_HISR_COMMAND command;
  T_DYN_DWNLD_HISR_UN_PARAM uninstall_parameters;
  T_DYN_DWNLD_HISR_CPY_PARAM copy_parameters;
} T_L1A_DYN_DWNLD_HISR_COM;

/***************************************************************************************/
/* Dynamic download HISR structure to store dynamic download HISR global variables     */
/***************************************************************************************/

typedef struct
{
  UWORD8 state;
  BOOL   running;
  UWORD16 uninstall_counter;
  UWORD16 patch_ids_counter;
  UWORD32 running_source_pointer;
  UWORD16 tmp_patch_size;
} T_L1_DYN_DWNLD_API_HISR;

/***************************************************************************************/
/* Dynamic Download MCU-DSP API                                                        */
/***************************************************************************************/
typedef struct
{
  API d_api_dwl_download_ctrl;
  API d_api_dwl_error_code;
  API d_api_dwl_function_address[2];
  API d_api_dwl_crc;
  API d_api_dwl_size;
  API d_api_dwl_write_pointer;
} T_DYN_DWNLD_MCU_DSP;

typedef struct
{
  UWORD32 primitive;
  UWORD16 msg_id;
}T_SIGNAL_PATCH;

#define   GPRS_PATCH 0
#define   AMR_SCH_PATCH 1
#define   TTY_PATCH 2
#define   AMR_MMS_PATCH 3
#define   E2_PATCH 4


#define   DEDI_STATE_MACHINE 0
#define   TTY_STATE_MACHINE 1
#define   E2_STATE_MACHINE 2
#define   VOICE_MEMO_AMR_SM 3
#define   VOICE_PLAY_AMR_SM 4
#define   SPEECH_RECO_SM 5

#endif  // _L1_DYN_DWL_DEFTY_H_
#endif  // L1_DYN_DSP_DWNLD