view src/cs/layer1/gtt_include/ctm/ctm_receiver.h @ 629:3231dd9b38c1

armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/*
*******************************************************************************
*
*      COPYRIGHT (C) 2000 BY ERICSSON EUROLAB DEUTSCHLAND GmbH
*      90411 NUERNBERG, GERMANY, Tel Int + 49 911 5217 100
*
*      The program(s) may be used and/or copied only with the
*      written permission from Ericsson or in accordance
*      with the terms and conditions stipulated in the agreement or
*      contract under which the program(s) have been supplied.
*
*******************************************************************************
*
*      File             : ctm_receiver.h
*      Author           : EEDN/RV Matthias Doerbecker
*      Tested Platforms : Sun Solaris, Windows NT 4.0
*      Description      : header file for ctm_receiver.c
*
*      Changes since October 13, 2000:
*      - added reset function reset_ctm_receiver()
*
*      $Log: $
*
*******************************************************************************
*/
#ifndef ctm_receiver_h
#define ctm_receiver_h "$Id: $"

/*
*******************************************************************************
*                         INCLUDE FILES
*******************************************************************************
*/

#include "init_interleaver.h"
//#include "tonedemod.h"
#include "wait_for_sync.h"
#include "conv_poly.h"
#include "viterbi.h"
#include "ctm_typedefs.h"
#include "fifo.h"

#include <stdlib.h>
#include <stdio.h> 


/* ******************************************************************/
/* Type definitions for variables that contain all states of the    */
/* Cellular Text Telephone Modem (CTM) Transmitter and Receiver,    */
/* respectively.                                                    */
/* ******************************************************************/

typedef struct {
  /* simple variables */
  WORD16    samplingCorrection;
  WORD16    numBitsWithLowReliability;
  WORD16    cntIdleSymbols;
  WORD16    numDeintlBits;
  WORD16    cntRXBits;
  WORD16    syncCorrect;
  WORD16    cntUnreliableGrossBits;
  WORD16    intl_delay;
  
  /* structs (state types) */
  fifo_state_t          rx_bits_fifo_state;
  fifo_state_t          octet_fifo_state;
  fifo_state_t          net_bits_fifo_state;
  //demod_state_t         tonedemod_state;
  // interleaver_state_t   intl_state;
  interleaver_state_t   deintl_state;
  wait_for_sync_state_t wait_state;
  viterbi_t             viterbi_state;
   
  /* vectors (not to be allocated) */
#if (NUM_MUTE_ROWS>0)
  WORD16    mutePositions[intlvB*NUM_MUTE_ROWS];
#else
  WORD16    mutePositions[1];
#endif

  /* vectors (to be allocated in init_ctm_receiver()) */
  WORD16    *waitSyncOut;
  WORD16    *deintlOut;

} rx_state_t;




/***********************************************************************/
/* init_ctm_receiver()                                                 */
/* *******************                                                 */
/* Initialization of the CTM Receiver.                                 */
/*                                                                     */
/* output vaiables:                                                    */
/* rx_state :   pointer to a variable of rx_state_t containing the     */
/*              initialized states of the receiver                     */
/***********************************************************************/

void init_ctm_receiver(rx_state_t* rx_state);

/*
 ***********************************************************************
 * Shutdown_ctm_receiver()                                             *
 * ***********************                                             *
 * Shutdown of the CTM Receiver.                                       *
 *                                                                     *
 * Input variables:                                                    *
 * rx_state :   pointer to a variable of rx_state_t containing the     *
 *              initialized states of the receiver                     *
 ***********************************************************************
*/
void Shutdown_ctm_receiver(rx_state_t* rx_state);

/*
 ***********************************************************************
 * reset_ctm_receiver()                                                *
 * ********************                                                *
 * Reset of the Cellular Text Telephone Modem receiver, state          *
 * machines and buffer pointers.                                       *
 *                                                                     *
 * Input variables:                                                    *
 * rx_state :   pointer to a variable of rx_state_t containing the     *
 *              initialized states of the receiver                     *
 ***********************************************************************
*/
void reset_ctm_receiver(rx_state_t* rx_state);


/***************************************************************************/
/* ctm_receiver()                                                          */
/* **************                                                          */
/* Runs the Cellular Text Telephone Modem Receiver for a block of          */
/* (nominally) 160 samples. Due to the internal synchronization, the       */
/* number of processed samples might vary between 156 and 164 samples.     */
/* The input of the samples and the output of the decoded characters       */
/* is handled via fifo buffers, which have to be initialized               */
/* externally before using this function (see fifo.h for details).         */
/*                                                                         */
/* input/output variables:                                                 */
/* *ptr_signal_fifo_state      fifo state for the input samples            */
/* *ptr_output_char_fifo_state fifo state for the output characters        */
/* *ptr_early_muting_required  returns whether the original audio signal   */
/*                             must not be forwarded. This is to guarantee */
/*                             that the preamble or resync sequence is     */
/*                             detected only by the first CTM device, if   */
/*                             several CTM devices are cascaded            */
/*                             subsequently.                               */
/* *rx_state                   pointer to the variable containing the      */
/*                             receiver states                             */
/***************************************************************************/

void ctm_receiver(fifo_state_t*  ptr_signal_fifo_state,
                  fifo_state_t*  ptr_output_char_fifo_state,
                  BOOL*          ptr_early_muting_required,
                  rx_state_t*    rx_state);

#endif