FreeCalypso > hg > fc-magnetite
view src/cs/services/audio/audio_compatibilities.h @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 02 Jan 2020 05:38:26 +0000 |
parents | 838eeafb0051 |
children |
line wrap: on
line source
/****************************************************************************/ /* */ /* File Name: audio_compatibilities.h */ /* */ /* Purpose: This file contains the compatibilities table between the */ /* audio feature as describe in the S916 specification (annex) */ /* */ /* Version 0.1 */ /* */ /* Date Modification */ /* ------------------------------------ */ /* 12 November 2001 Create */ /* */ /* Author Francois Mazard */ /* */ /* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/ /****************************************************************************/ #include "rv/rv_defined_swe.h" #ifdef RVM_AUDIO_MAIN_SWE #ifndef __AUDIO_COMPATIBILITIES_H_ #define __AUDIO_COMPATIBILITIES_H_ #ifdef __cplusplus extern "C" { #endif /* Define the number of audio features */ #define AUDIO_NUMBER_OF_FEATURES (13) typedef struct { BOOLEAN feature[AUDIO_NUMBER_OF_FEATURES]; } T_AUDIO_ACTIVE_FEATURE; /* Define the list of the audio features */ #define AUDIO_KEYBEEP_FEATURE (0) #define AUDIO_TONES_FEATURE (1) #define AUDIO_MELODY_E1_FEATURE (2) #define AUDIO_VOICE_MEMO_PLAY_FEATURE (3) #define AUDIO_VOICE_MEMO_RECORD_FEATURE (4) #define AUDIO_SR_ENROLL_FEATURE (5) #define AUDIO_SR_UPDATE_FEATURE (6) #define AUDIO_SR_RECO_FEATURE (7) #define AUDIO_MELODY_E2_FEATURE (8) #define AUDIO_TTY_FEATURE (9) #define AUDIO_VOICE_MEMO_AMR_PLAY_FEATURE (10) #define AUDIO_VOICE_MEMO_AMR_RECORD_FEATURE (11) #define AUDIO_MIDI_FEATURE (12) /* It isn't a starting message */ #define AUDIO_NO_START_MESSAGE (-1) typedef struct { BOOLEAN compatibilities_flag[AUDIO_NUMBER_OF_FEATURES]; } T_AUDIO_COMPATIBILITES; #ifdef __cplusplus } #endif #endif /* __AUDIO_COMPATIBILITIES_H_ */ #endif /* #ifdef RVM_AUDIO_MAIN_SWE */