FreeCalypso > hg > fc-magnetite

view src/cs/services/audio/audio_error_hdlr_i.h @ 629:3231dd9b38c1

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 838eeafb0051
children
line wrap: on
line source

/****************************************************************************/
/*                                                                          */
/*  File Name:  audio_error_hdlr_i.h                                        */
/*                                                                          */
/*  Purpose:  This file contains routines used to report unrecoverable      */
/*            memory errors that might occur.                               */
/*                                                                          */
/*  Version   0.1                                                           */
/*                                                                          */
/*  Date        Modification                                                */
/*  ------------------------------------------------------------------------*/
/*  14 May 2001  Create                                                     */
/*                                                                          */
/*  Author      Francois Mazard - Stephanie Gerthoux                        */
/*                                                                          */
/* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/
/****************************************************************************/

#include "rv/rv_defined_swe.h"
#ifdef RVM_AUDIO_MAIN_SWE
  #ifndef  _AUDIO_ERROR_HDLR_I_H
    #define  _AUDIO_ERROR_HDLR_I_H

    #include "l1_confg.h"

    /* error trace functions prototypes */
    #if (KEYBEEP)
      void audio_keybeep_error_trace(UINT8 error_id);
    #endif

    #if (TONE)
      void audio_tones_error_trace(UINT8 error_id);
    #endif

    #if (MELODY_E1)
      void audio_melody_E1_error_trace(UINT8 error_id);
    #endif

    #if (MELODY_E2)
      void audio_melody_E2_error_trace(UINT8 error_id);
    #endif

    #if (VOICE_MEMO)
      void audio_voice_memo_error_trace(UINT8 error_id);
    #endif

    void audio_mode_error_trace(UINT8 error_id);

    #if (SPEECH_RECO)
      void audio_sr_error_trace(UINT8 error_id);
    #endif

  #if (MELODY_E1) || (VOICE_MEMO) || (SPEECH_RECO)
    void audio_ffs_error_trace(UINT8 error_id);
  #endif

    #if (L1_VOICE_MEMO_AMR)
      void audio_voice_memo_amr_error_trace(UINT8 error_id);
    #endif

    #if (L1_AUDIO_DRIVER)
      void audio_driver_error_trace(UINT8 error_id);
    #endif

    #if (AUDIO_MEM_MANAGER)
      void audio_mem_error_trace(UINT8 error_id);
    #endif

    /* extern prototype */
    extern void audio_error_trace(UINT8 error_id);

    #if (L1_MIDI==1)
      void audio_midi_error_trace(UINT8 error_id);
    #endif

    /* Id of the error trace */
    #define AUDIO_ENTITY_NOT_START             (0)
    #define AUDIO_ENTITY_NO_MEMORY             (1)
    #define AUDIO_ERROR_STOP_EVENT             (2)
    #define AUDIO_ERROR_START_EVENT            (3)
    #define AUDIO_ERROR_INIT_EVENT             (4)
    #define AUDIO_ERROR_FREE_EVENT             (5)
    #define AUDIO_ENTITY_BAD_PARAMETER         (6)
    #define AUDIO_ENTITY_BAD_MESSAGE           (7)
    #define AUDIO_ERROR_MODE                   (8)
    #define AUDIO_ENTITY_FILE_ERROR            (9)
    #define AUDIO_ENTITY_FILE_NO_SAVED         (10)
    #define AUDIO_ENTITY_FILE_ALREADY_EXIST    (11)
    #define AUDIO_ENTITY_FILE_NO_CLOSE         (12)
    #define AUDIO_ENTITY_SPEECH_NO_SAVED       (13)
    #define AUDIO_ENTITY_MODEL_NO_SAVED        (14)
    #define AUDIO_ENTITY_BAD_DATABASE          (15)
    #define AUDIO_ENTITY_MODEL_NO_LOAD         (16)
    #define AUDIO_ENTITY_AUDIO_MODE_NO_LOADED  (17)
    #define AUDIO_ERROR_DOWNLOAD               (18)
    #define AUDIO_ERROR_NOT_DOWNLOAD           (19)
    #define AUDIO_ENTITY_LOAD_FILE_INSTR_ERROR (20)
    #define AUDIO_ERROR_INSTRUMENT_SIZE        (21)
    #define AUDIO_FEATURE_NOT_COMPILED         (22)
    #define AUDIO_ERROR_L1_START_EVENT         (23)
    #define AUDIO_ERROR_L1_STOP_EVENT          (24)
  #endif
#endif /* #ifdef RVM_AUDIO_MAIN_SWE */