view src/cs/services/mks/mks_handle_message.c @ 629:3231dd9b38c1

armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/**
 * @file   mks_handle_msg.c
 *
 * Coding of the mks_handle_msg function, which is called when the SWE
 * receives a new message.
 *
 * @author   Laurent Sollier (l-sollier@ti.com)
 * @version 0.1
 */

/*
 * History:
 *
 *   Date          Author       Modification
 *  ----------------------------------------
 *  11/19/2001     L Sollier    Create
 *
 *
 * (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved
 */

#include "mks/mks_api.h"
#include "mks/mks_i.h"
#include "mks/mks_messages_i.h"

#include "rv/rv_general.h"
#include "rvf/rvf_api.h"
#include "rvm/rvm_use_id_list.h"

/**
 * @name Functions implementation
 *
 */
/*@{*/

/**
 * function: mks_handle_msg
 */
T_RV_RET mks_handle_msg(T_RV_HDR   *msg_p)
{
   if (msg_p != NULL)
   {
      switch (msg_p->msg_id)
      {
         /* A new magic key sequence is added */
         case MKS_INFOS_KEY_SEQUENCE_MSG:
         {
            T_MKS_INFOS_KEY_SEQUENCE_MSG* msg_infos_key_sequence_p= (T_MKS_INFOS_KEY_SEQUENCE_MSG*) msg_p;

            MKS_SEND_TRACE("MKS: 'Add magic key sequence' message received", RV_TRACE_LEVEL_DEBUG_LOW);

            mks_add_key_sequence_i(msg_infos_key_sequence_p);
            break;
         }

         /* A magic key sequence is removed */
         case MKS_REMOVE_KEY_SEQUENCE_MSG:
         {
            T_MKS_REMOVE_KEY_SEQUENCE_MSG* msg_remove_key_sequence_p= (T_MKS_REMOVE_KEY_SEQUENCE_MSG*) msg_p;

            MKS_SEND_TRACE("MKS: 'Remove magic key sequence' message received", RV_TRACE_LEVEL_DEBUG_LOW);

            mks_remove_key_sequence_i(msg_remove_key_sequence_p);
            break;
         }


         /* Process a key released */
         case KPD_KEY_EVENT_MSG:
         {
            T_KPD_KEY_EVENT_MSG* msg_key_event_p= (T_KPD_KEY_EVENT_MSG*) msg_p;

            mks_check_key_sequence(msg_key_event_p);
            break;
         }

         /* Check the subscription status */
         case KPD_STATUS_MSG:
         {
            T_KPD_STATUS_MSG* msg_keypad_status_p= (T_KPD_STATUS_MSG*) msg_p;
            
            if (msg_keypad_status_p->operation == KPD_SUBSCRIBE_OP)
            {
               if (msg_keypad_status_p->status_value == KPD_PROCESS_OK)
               {
                  MKS_SEND_TRACE("MKS: Keypad subscription OK", RV_TRACE_LEVEL_DEBUG_LOW);
               }
               else
               {
                  MKS_SEND_TRACE("MKS: Keypad subscription failed", RV_TRACE_LEVEL_ERROR);
               }
            }
            else
            {
               MKS_SEND_TRACE("MKS: Unexpected keypad status message received", RV_TRACE_LEVEL_ERROR);
            }

            break;
         }

         default: 
         {
            /* Unknow message has been received */
            MKS_SEND_TRACE("MKS: Message received unknown", RV_TRACE_LEVEL_ERROR);
            break; 
         }
      }

      /* Free message */
      rvf_free_buf(msg_p);
   }

   return RV_OK;
}

/*@}*/