FreeCalypso > hg > fc-magnetite

view src/g23m-aci/aci/aci_bat_ss.c @ 629:3231dd9b38c1

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 53929b40109c
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-F&D (8411)
|  Modul   :  ACI_BAT
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved. 
|
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This BAT wrapper modul is ...
| 
+----------------------------------------------------------------------------- 
*/ 
 
#include "aci_all.h"     /* includes prim.h, which includes p_bat.h */ 
#include "aci_cmh.h" 
#include "ati_cmd.h" 
#include "aci_cmd.h" /* prototypes of helper functions */ 
#include "psa.h"
#include "cmh.h"
#include "aci_bat_cmh.h" /* prototypes of sBAT_,qBAT_,tBAT_ */ 
#include "aci_bat.h"
#include "aci_bat_err.h" /*prototypes of err functions for BAT*/


/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCTFR        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCTFR        (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_ACI_TOA     type;
  T_ACI_TOA    *p_type;
  T_ACI_TOS     satype;
  T_ACI_TOS    *p_satype;
  //CHAR         *subadr = subBuf;
  char          subBuf[MAX_SUBADDR_LEN]={0};
  char*         p_subBuf;
  SHORT         toa_oct = 0;
  SHORT         tos_oct = 0;
  CHAR          numBuf[MAX_B_SUBSCR_NUM_LEN];
  
  TRACE_FUNCTION ("sBAT_PlusCTFR()");

  p_type   = &type;
  p_satype = &satype;  
  p_subBuf = subBuf;
  memset( numBuf, 0, sizeof(numBuf));
  
  memcpy(numBuf,cmd->params.ptr_set_plus_ctfr->number,cmd->params.ptr_set_plus_ctfr->c_number);

  if ( cmd->params.ptr_set_plus_ctfr->type EQ (S16)BAT_PARAMETER_NOT_PRESENT )
  {
    p_type = NULL;
  }
  else
  {
    toa_oct = cmd->params.ptr_set_plus_ctfr->type;
  }
  if ( cmd->params.ptr_set_plus_ctfr->satype EQ (S16)BAT_PARAMETER_NOT_PRESENT )
  {
    p_satype = NULL;
  }
  else
  {
    tos_oct = cmd->params.ptr_set_plus_ctfr->satype;
  }
  /* Type Of Address present */
  type = toa_demerge (toa_oct);
  if (type.ton < 0 OR type.npi < 0)
  {
    ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_OpNotAllow);
    return (ACI_BAT_FAIL);
  }
  satype = tos_demerge (tos_oct);
  if (satype.tos < 0 OR satype.oe < 0)
  {
    ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_OpNotAllow);
    return (ACI_BAT_FAIL);
  }
     
  if(cmd->params.ptr_set_plus_ctfr->v_subaddr)
  {
    memcpy(subBuf,cmd->params.ptr_set_plus_ctfr->subaddr,cmd->params.ptr_set_plus_ctfr->c_subaddr);
  }
  else
  {
   p_subBuf = NULL;
  }
  ret = (T_ACI_BAT_RSLT)sAT_PlusCTFR ((T_ACI_CMD_SRC)src_infos_psi->srcId, numBuf, p_type, p_subBuf, p_satype); 
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCCFC        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCCFC (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_BAT_plus_ccfc_reason       reason;
  T_BAT_plus_ccfc_mode       mode;
  T_ACI_TOA           type;
  T_ACI_TOA          *p_type;
  T_ACI_TOS           satype;
  T_ACI_TOS          *p_satype;
  T_BAT_plus_ccfc_bearer_class         class_type=BAT_CCFC_CLASS_NOT_PRESENT;
  //CHAR               *subadr = subBuf;
  char           subBuf[MAX_SUBADDR_LEN]={0};
  char*          p_subBuf; 
  T_BAT_plus_ccfc_time             time=BAT_CCFC_TIME_NOT_PRESENT;
  SHORT               toa_oct=0;
  SHORT               tos_oct=0;
  CHAR                numBuf[MAX_B_SUBSCR_NUM_LEN];
  CHAR*               p_numBuf;
  
  TRACE_FUNCTION ("sBAT_PlusCCFC()");

  p_type=&type;
  p_satype=&satype;  
  p_subBuf = subBuf;
  p_numBuf = numBuf;
  memset( numBuf, 0, sizeof(numBuf));
  
  reason = cmd->params.ptr_set_plus_ccfc->reason;
  mode = cmd->params.ptr_set_plus_ccfc->mode;
  toa_oct = cmd->params.ptr_set_plus_ccfc->type;
  tos_oct = cmd->params.ptr_set_plus_ccfc->satype;
  class_type = cmd->params.ptr_set_plus_ccfc->bearer_class;
  time = cmd->params.ptr_set_plus_ccfc->time;
    
  if (mode EQ BAT_CCFC_MODE_QUERY)                     /*query mode*/
  {
    ret = (T_ACI_BAT_RSLT)qAT_PlusCCFC((T_ACI_CMD_SRC)src_infos_psi->srcId,
		      (T_ACI_CCFC_RSN)reason,(T_ACI_CLASS)class_type);
    switch ((T_ACI_RETURN)ret)
    {
      case AT_EXCT:
      case AT_BUSY:
      case AT_FAIL:
      {
        return ret;
      }
      default:
      {
        return (ACI_BAT_FAIL);
      }
    }
  }
  if(cmd->params.ptr_set_plus_ccfc->v_subaddr)
  {
    memcpy(subBuf,cmd->params.ptr_set_plus_ccfc->subaddr,cmd->params.ptr_set_plus_ccfc->c_subaddr);
  }
  else
  {
    p_subBuf = NULL;
  }

  if ( cmd->params.ptr_set_plus_ccfc->type EQ (S16)BAT_PARAMETER_NOT_PRESENT )
  {
    p_type = NULL;
  }  
  else
  {
    toa_oct = cmd->params.ptr_set_plus_ccfc->type;
  }  
    
  if ( cmd->params.ptr_set_plus_ccfc->satype EQ (S16)BAT_PARAMETER_NOT_PRESENT )
  {
    p_satype = NULL;
  }
  else
  {
    tos_oct = cmd->params.ptr_set_plus_ccfc->satype;
  }
    /* Type Of Address present */
  type = toa_demerge (toa_oct);
  if (type.ton < 0 OR type.npi < 0)
  {
    ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_OpNotAllow);
    return (ACI_BAT_FAIL);
  }
  
  satype = tos_demerge (tos_oct);
  if (satype.tos < 0 OR satype.oe < 0)
  {
    ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_OpNotAllow);
    return (ACI_BAT_FAIL);
  }

  if(cmd->params.ptr_set_plus_ccfc->v_number)
  {
    memcpy(numBuf,cmd->params.ptr_set_plus_ccfc->number,cmd->params.ptr_set_plus_ccfc->c_number);
  }
  else
  {
    p_numBuf = NULL; 	 
  }
  ret = (T_ACI_BAT_RSLT)sAT_PlusCCFC((T_ACI_CMD_SRC)src_infos_psi->srcId,(T_ACI_CCFC_RSN)reason,
  	     (T_ACI_CCFC_MOD)mode,p_numBuf,p_type,(T_ACI_CLASS)class_type,p_subBuf,p_satype,time); 
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCLCK        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCLCK        (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_BAT_plus_clck_fac       fac_num;
  T_BAT_plus_clck_mode       mod;
  T_BAT_bearer_class      class_type = BAT_CLASS_NOT_PRESENT;
  T_BAT_cmd_response resp;
  T_ACI_CLSSTAT       clsStat;
  char                passwd[MAX_PWD_LENGTH]={0};
    
  TRACE_FUNCTION ("sBAT_PlusCLCK()");
  
  fac_num = cmd->params.ptr_set_plus_clck->fac;
  mod = cmd->params.ptr_set_plus_clck->mode;
  class_type = cmd->params.ptr_set_plus_clck->bearer_class;

    
  if (mod EQ BAT_CLCK_MODE_QUERY)                     /*query mode*/
  {
    T_BAT_res_set_plus_clck clck;
    ret=(T_ACI_BAT_RSLT)qAT_PlusCLCK((T_ACI_CMD_SRC)src_infos_psi->srcId,(T_ACI_FAC)fac_num,
		 (T_ACI_CLASS)class_type,&clsStat);
    resp.ctrl_response = BAT_RES_SET_PLUS_CLCK;
    resp.response.ptr_set_plus_clck = &clck;
    resp.response.ptr_set_plus_clck->status = BAT_CLCK_STATUS_NOT_ACTIVE ; 
    resp.response.ptr_set_plus_clck->bearer_class = BAT_CLASS_NOT_PRESENT;
     
    if(ret EQ ACI_BAT_CMPL)
    {
      switch(clsStat.status)
      {
        case STATUS_Active:
          resp.response.ptr_set_plus_clck->status = BAT_CLCK_STATUS_ACTIVE;
          break;
        case STATUS_NotActive:
          resp.response.ptr_set_plus_clck->status = BAT_CLCK_STATUS_NOT_ACTIVE;
          break;        
      }

      if(clsStat.class_type NEQ CLASS_NotPresent)
      {
        resp.response.ptr_set_plus_clck->bearer_class = (T_BAT_bearer_class)clsStat.class_type;        
      }
      aci_bat_send(src_infos_psi , &resp);
      return (ACI_BAT_CMPL);
    }
  }
  else                              /*set mode*/
  {
    if(cmd->params.ptr_set_plus_clck->v_passwd)
    {
      memcpy(passwd,cmd->params.ptr_set_plus_clck->passwd,cmd->params.ptr_set_plus_clck->c_passwd);
    }
    ret = (T_ACI_BAT_RSLT)sAT_PlusCLCK((T_ACI_CMD_SRC)src_infos_psi->srcId,
		(T_ACI_FAC)fac_num,(T_ACI_CLCK_MOD)mod,passwd,(T_ACI_CLASS)class_type);
  }

  switch((T_ACI_RETURN)ret)
  {
    case AT_EXCT:
    case AT_FAIL:
    {
      break;
    }  
    case(AT_BUSY):
    {
      TRACE_EVENT("sBAT_PlusCLCK(): ME is busy");
      break;
    }  
  }
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCPWD        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCPWD        (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_BAT_plus_cpwd_fac      fac_num;
  CHAR                oldpwd[MAX_PWD_LENGTH]={0};
  CHAR                newpwd[MAX_PWD_LENGTH]={0};
      
  TRACE_FUNCTION ("sBAT_PlusCPWD()");
 
  fac_num = cmd->params.ptr_set_plus_cpwd->fac;
  memcpy(oldpwd, cmd->params.ptr_set_plus_cpwd->oldpwd,cmd->params.ptr_set_plus_cpwd->c_oldpwd);
  memcpy(newpwd, cmd->params.ptr_set_plus_cpwd->newpwd,cmd->params.ptr_set_plus_cpwd->c_newpwd);
  ret = (T_ACI_BAT_RSLT)sAT_PlusCPWD((T_ACI_CMD_SRC)src_infos_psi->srcId,(T_ACI_FAC)fac_num,oldpwd,newpwd); 
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCUSD        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCUSD        (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_USSD_DATA ussd;
  T_ACI_USSD_DATA *ussd_ptr;
  T_BAT_cmd_set_plus_cusd *cusd;

  TRACE_FUNCTION ("sBAT_PlusCUSD()");

  /*
  *   Get a pointer to the BAT structure for convenience.
  */
  cusd=cmd->params.ptr_set_plus_cusd;

  ussd_ptr=NULL;

  if (cusd->v_str)
  {
    USHORT len;

    utl_ussdDtaFromTe (
      (UBYTE*)cusd->str,
      cusd->c_str,
      (UBYTE*)ussd.data,
      &len,
#ifdef REL99
      sizeof(ussd.data),
#endif /* REL99 */
      (UBYTE)cusd->dcs);
  
    if (len>MAX_USSD_LEN)
    {
      /*
      *   The USSD string is too big for the ACI structure. This should
      *   not happen, and if it does means that we have overwritten
      *   memory.
      */
      ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_TxtToLong);
      return(ACI_BAT_FAIL);
    }

    ussd.len=(UBYTE)len;
    ussd_ptr=&ussd;
  }

  /*
  *   Call the corresponding sAT function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)sAT_PlusCUSD(
        (T_ACI_CMD_SRC)src_infos_psi->srcId,
      ussd_ptr,
      (SHORT)cusd->dcs);

  return(ret);
}

#ifdef SIM_PERS
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentMEPD     |
+--------------------------------------------------------------------+

  PURPOSE : Mobile Equipment Personalization Data (SIM LOCK)
            The set command has query semantic
*/

GLOBAL T_ACI_BAT_RSLT sBAT_PercentMEPD (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                        T_BAT_cmd_send    *cmd)
{
  T_ACI_RETURN ret;
  T_SUP_INFO   sup_info;

  TRACE_FUNCTION("sBAT_PercentMEPD()");

  memset(&sup_info, 0, sizeof(T_SUP_INFO));
  sup_info.infoType =(T_SUP_INFO_TYPE)cmd->params.ptr_set_percent_mepd->sup_info_type;
  
  ret = qAT_PercentMEPD((T_ACI_CMD_SRC)src_infos_psi->srcId, &sup_info);

  if (ret EQ AT_CMPL)
  {
    T_BAT_cmd_response resp;
    T_BAT_res_set_percent_mepd mepd;

    resp.ctrl_response = BAT_RES_SET_PERCENT_MEPD;
    resp.response.ptr_set_percent_mepd = &mepd;
    mepd.datavalue = sup_info.datavalue;
    
    aci_bat_send(src_infos_psi, &resp);
    return(ACI_BAT_CMPL);
  }
  
  return((T_ACI_BAT_RSLT)ret);
}
#endif /* SIM_PERS */