FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci/cmh_mm.h @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 02 Jan 2020 05:38:26 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : CMH_MM +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Definitions for the command handler of the | Mobility Mangement +----------------------------------------------------------------------------- */ #ifndef CMH_MM_H #define CMH_MM_H /*==== CONSTANTS ==================================================*/ #define PNN_SHORT_NAME_IEI 0x45 #define PNN_LONG_NAME_IEI 0x43 /*==== TYPES ======================================================*/ /* According to ITE-E 212 MNC shall not be more that 3 digits Thus 0xffff is invalid number and means that rules are same for all Operators in the country*/ #define ALL_MNC 0x7fff #define MM_FFS_OPER_DIR "/gsm/cops" #define MM_FFS_OPER_FILE "/gsm/cops/operimsi" typedef struct FFSPLMNIMSI { UBYTE mcc[SIZE_MCC]; UBYTE mnc[SIZE_MNC]; UBYTE IMSI[MAX_IMSI-1]; } T_FFSPLMNIMSI; /* Type for ECCIgnoreTable. See descr for ECCIgnoreTable*/ typedef struct ECCIgnoreRec { SHORT mcc; SHORT mnc; char *ecc; } T_ECCIgnoreRec; /* Type for CPHS ONS reade state*/ typedef enum { ONS_READ_NOT_DONE = 0, ONS_READING, ONS_READ_OVER, ONS_READ_FAIL } T_ONS_READ_STATE; /*==== PROTOTYPES =================================================*/ EXTERN SHORT cmhMM_Registered ( void ); EXTERN SHORT cmhMM_Deregistered ( void ); EXTERN SHORT cmhMM_SelNetwork ( USHORT cause ); EXTERN SHORT cmhMM_NetworkLst ( void ); EXTERN BOOL cmhMM_FindPLMN ( T_OPER_ENTRY * plmnDesc, SHORT mcc, SHORT mnc, U16 lac, BOOL nw_search ); EXTERN BOOL cmhMM_getBandSettings( UBYTE *SetBands, UBYTE *AllowedBands ); EXTERN BOOL cmhMM_isBandAllowed( UBYTE band, UBYTE AllowedBands ); EXTERN BOOL cmhMM_writeSetBand ( UBYTE setband ); EXTERN BOOL cmhMM_FindNumeric ( T_OPER_ENTRY * plmnDesc, const CHAR * numStr ); EXTERN BOOL cmhMM_FindName ( T_OPER_ENTRY * plmnDesc, const CHAR * longStr, T_ACI_CPOL_FRMT format ); EXTERN void cmhMM_CnvrtPLMN2INT( const UBYTE * BCDmcc, const UBYTE * BCDmnc, SHORT * mccBuf, SHORT * mncBuf ); EXTERN void cmhMM_CnvrtINT2PLMN( SHORT INTmcc, SHORT INTmnc, UBYTE * mccBuf, UBYTE * mncBuf ); EXTERN T_ACI_CREG_STAT cmhMM_GetNregCREGStat( void ); EXTERN T_ACI_CME_ERR cmhMM_GetNregCMEStat ( void ); EXTERN USHORT cmhMM_GetOperLstLen ( void ); EXTERN void cmhMM_CnvrtTrmPCMOpNam( T_OPER_ENTRY *plmnDesc, void *pPCMBuf ); EXTERN void cmhMM_Ntfy_NtwRegistrationStatus( T_ACI_CREG_STAT creg ); EXTERN SHORT cmhMM_CipheringInd ( UBYTE ciph ); EXTERN BOOL cmhMM_OpCheckName (); /* EONS function */ EXTERN void cmhMM_OpCheckList ();/* EONS function */ EXTERN BOOL cmhMM_OpReadName ( UBYTE rec_num);/* EONS function */ EXTERN void cmhMM_OpReadNameCb ( SHORT table_id);/* EONS function */ EXTERN void cmhMM_OpSetPNNLst(); /* EONS function */ EXTERN void cmhMM_OpExtractNameCB ( SHORT table_id); /* EONS function */ EXTERN BOOL cmhMM_OpUpdateName (); /* EONS function */ EXTERN void cmhMM_GetCmerSettings (T_ACI_CMD_SRC srcId, T_ACI_MM_CMER_VAL_TYPE *sCmerSettings ); EXTERN BOOL cmhMM_ChkIgnoreECC(CHAR *dialStr); EXTERN T_ACI_RETURN cmhMM_OperatorSelect(T_ACI_CMD_SRC srcId, T_ACI_NRG_RGMD regMode, T_ACI_NRG_SVMD srvMode, T_ACI_NRG_FRMT oprFrmt, CHAR *opr); EXTERN void cmhMM_OperatorQuery( T_ACI_CMD_SRC srcId, T_ACI_COPS_FRMT format, CHAR *oper); EXTERN BOOL cmhMM_OperatorStoreInFFS(UBYTE* mcc, UBYTE* mnc, UBYTE* IMSI); EXTERN BOOL cmhMM_OperatorReadFromFFS(UBYTE* mcc, UBYTE* mnc, UBYTE* IMSI); EXTERN BOOL cmhMM_GetActingHPLMN(SHORT * mccBuf, SHORT * mncBuf); EXTERN BOOL cmhMM_ONSReadName ();//EONS function EXTERN void cmhMM_ONSReadNameCb ( SHORT table_id);//EONS function EXTERN void cmhMM_Reset_ONSDesc (); /*==== EXPORT =====================================================*/ #ifdef CMH_MMF_C GLOBAL T_ENT_STAT mmEntStat; GLOBAL BOOL regReqPnd = FALSE; #else EXTERN T_ENT_STAT mmEntStat; EXTERN BOOL regReqPnd; #endif /* CMH_MMF_C */ #endif /* CMH_MM_H */ /*==== EOF =======================================================*/