view src/g23m-fad/l2r/tra_dns.c @ 629:3231dd9b38c1

armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 90eb61ecd093
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  CSD (8411)
|  Modul   :  L2r_dns.c
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This Modul defines the functions for processing
|             of incomming signals for the component
|             L2R of the base station
+-----------------------------------------------------------------------------
*/

#ifndef TRA_DNS_C
#define TRA_DNS_C
#endif

#define ENTITY_L2R

/*==== INCLUDES ===================================================*/

#include <string.h>

#include "typedefs.h"
#include "pconst.cdg"
#include "vsi.h"
#include "macdef.h"
#include "custom.h"
#include "gsm.h"
#include "prim.h"
#include "pei.h"
#include "tok.h"
#include "dti.h"

#include "cl_ribu.h"
#include "tra_pei.h"
#include "tra.h"

/*==== CONST =======================================================*/

/*==== TYPES =======================================================*/

/*==== VAR EXPORT ==================================================*/

/*==== VAR LOCAL ===================================================*/

/*==== FUNCTIONS ===================================================*/

/*
+-------------------------------------------------------------------------------------
|  Function    : sig_mgt_tra_dn_dti_conn_setup
+-------------------------------------------------------------------------------------
|  Description : Process signal SIG_MGT_DL_CONNECT received from process management.
|
|  Parameters  :
|
|  Return      : -
+-------------------------------------------------------------------------------------
*/
GLOBAL void sig_mgt_tra_dn_dti_conn_setup ()
{
  TRACE_FUNCTION ("sig_mgt_tra_dn_dti_conn_setup()");

  switch (GET_STATE (DN))
  {
  case DN_INACTIVE:
    dl_init(&tra_data->dn);
    break;
  }
}

/*
+-------------------------------------------------------------------------------------
|  Function    : sig_mgt_tra_dn_dti_conn_open
+-------------------------------------------------------------------------------------
|  Description : Process signal SIG_MGT_DL_CONNECT received from process management.
|
|  Parameters  :
|
|  Return      : -
+-------------------------------------------------------------------------------------
*/
GLOBAL void sig_mgt_tra_dn_dti_conn_open ()
{
  TRACE_FUNCTION ("sig_mgt_tra_dn_dti_conn_open()");
  
  switch (GET_STATE (DN))
  {
  case DN_INACTIVE:
    dl_init(&tra_data->dn);
    SET_STATE (DN, DN_IDLE);
    break;
  }
}

/*
+------------------------------------------------------------------------------
|  Function    : sig_mgt_tra_dn_dti_disc
+------------------------------------------------------------------------------
|  Description : Process signal SIG_MGT_DL_DISC received
|                from process management.
|
|
|  Parameters  : -
|
|
|  Return      : -
+------------------------------------------------------------------------------
*/

GLOBAL void sig_mgt_tra_dn_dti_disc(void)
{
  T_TRA_DN *ddl = &tra_data->dn;

  TRACE_FUNCTION ("sig_mgt_tra_dn_dti_disc()");

  SET_STATE (DN, DN_INACTIVE);

  if (ddl->prim NEQ NULL) /* free allocated prims and their lists */
  {
    PFREE_DESC2(ddl->prim)
    ddl->prim = NULL;
  }
}

/*
+------------------------------------------------------------------------------
|  Function    : sig_any_tra_dn_send_break_req 
+------------------------------------------------------------------------------
|  Description : Process signal SIG_MGT_DN_SEND_BREAK_REQ received
|                from process uplink.
|
|
|  Parameters  : - 
|                 
|
|  Return      : -
+------------------------------------------------------------------------------
*/

GLOBAL void sig_any_tra_dn_send_break_req(void)
{
  T_TRA_DN *ddl = &tra_data->dn;

  TRACE_FUNCTION ("sig_any_tra_dn_send_break_req");
 
  switch (GET_STATE (DN))
  {
  case DN_WAIT:
    if (ddl->Brk_dti_data_ind NEQ NULL)
    {
      dti_send_data(l2r_hDTI, TRA_DTI_UP_INSTANCE, TRA_DTI_UP_INTERFACE, TRA_DTI_UP_CHANNEL, ddl->Brk_dti_data_ind); 
      ddl->Brk_dti_data_ind = NULL; /* do not send it twice .. */
      SET_STATE (DN, DN_IDLE);
    }
    break;

  default:
    TRACE_ERROR ("[sig_any_tra_dn_send_break_req] unexpected state");
    break;
  }
}

GLOBAL void sig_mgt_tra_dn_break_req(void)
{
  T_TRA_DN *ddl = &tra_data->dn;

  TRACE_FUNCTION ("sig_mgt_tra_dn_break_req()");

  switch (GET_STATE (DN))
  {
  case DN_SEND:
    SET_STATE (DN, DN_IDLE);
    /* Fall through */
    
  case DN_IDLE:
  case DN_WAIT:
    if (ddl->prim NEQ NULL) /* free allocated prims and their lists */
    {
      PFREE_DESC2(ddl->prim)
      ddl->prim = NULL;
    }
    ddl->list_end = NULL;
    ddl->sa       = FL_INACTIVE;
    ddl->sb       = FL_INACTIVE;
    ddl->x        = FL_INACTIVE;
    break;
  }
}