FreeCalypso > hg > fc-magnetite
view src/g23m-fad/ppp/ppp_paps.c @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 02 Jan 2020 05:38:26 +0000 |
parents | 90eb61ecd093 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This modul is part of the entity PPP and implements all | functions to handles the incoming process internal signals as | described in the SDL-documentation (PAP-statemachine) +----------------------------------------------------------------------------- */ #ifndef PPP_PAPS_C #define PPP_PAPS_C #endif /* !PPP_PAPS_C */ #define ENTITY_PPP /*==== INCLUDES =============================================================*/ #include "typedefs.h" /* to get Condat data types */ #include "vsi.h" /* to get a lot of macros */ #include "macdef.h" /* to get a lot of macros */ #include "custom.h" /* to get a lot of macros */ #include "gsm.h" /* to get a lot of macros */ #include "cnf_ppp.h" /* to get cnf-definitions */ #include "mon_ppp.h" /* to get mon-definitions */ #include "prim.h" /* to get the definitions of used SAP and directions */ #include "dti.h" /* to get the DTILIB definitions */ #include "ppp.h" /* to get the global entity definitions */ #include "ppp_papf.h" /* to get function interface from pap */ #include "ppp_arbf.h" /* to get function interface from arb */ #include "ppp_ftxs.h" /* to get signal interface from ftx */ #include "ppp_arbs.h" /* to get signal interface from arb */ #include "ppp_rts.h" /* to get the rt signal interface */ /*==== CONST ================================================================*/ /*==== LOCAL VARS ===========================================================*/ /*==== PRIVATE FUNCTIONS ====================================================*/ /*==== PUBLIC FUNCTIONS =====================================================*/ /* +------------------------------------------------------------------------------ | Function : sig_arb_pap_packet_req +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_ARB_PAP_PACKET_REQ | | Parameters : packet - pointer to a generic data descriptor | +------------------------------------------------------------------------------ */ GLOBAL void sig_arb_pap_packet_req (T_desc2* packet) { UBYTE forward; TRACE_ISIG( "sig_arb_pap_packet_req" ); /* * depend on the code-field call appropriate function */ switch(packet->buffer[0]) { case CODE_AUTH_REQ: pap_rar(&packet, &forward); break; case CODE_AUTH_ACK: pap_raa(packet, &forward); break; case CODE_AUTH_NAK: pap_ran(packet, &forward); break; default: forward = FORWARD_DISCARD; break; } switch(forward) { case FORWARD_RARP: /* * send Authentication Ack packets until receive a stop signal from arb * or the counter becomes zero */ SET_STATE( PPP_SERVICE_PAP, PAP_UP ); ppp_data->pap.counter = ppp_data->mc; sig_any_ftx_packet_req(DTI_PID_PAP, packet); /* saa */ if(ppp_data->pap.counter > 0) ppp_data->pap.counter--; sig_any_rt_rrt_req(); sig_any_arb_tlu_ind(); break; case FORWARD_RARN: /* * just send Authentication NAK packet and * wait for next Authentication Request * to avoid endless authentication timer will not restarted */ sig_any_ftx_packet_req(DTI_PID_PAP, packet); /* san */ break; case FORWARD_RAA: /* * Authentication successful */ sig_any_rt_srt_req(); sig_any_arb_tlu_ind(); break; case FORWARD_RAN: /* * send new Authentication Request */ ppp_data->pap.counter = ppp_data->mc; /* * set new identifier */ ppp_data->pap.nari++; /* * create and send authenticate request packet */ pap_get_sar(&packet); sig_any_ftx_packet_req(DTI_PID_PAP, packet); if(ppp_data->pap.counter > 0) ppp_data->pap.counter--; sig_any_rt_rrt_req(); break; default: arb_discard_packet(packet); break; } } /* sig_arb_pap_packet_req() */ /* +------------------------------------------------------------------------------ | Function : sig_arb_pap_open_req +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_ARB_PAP_OPEN_REQ | | Parameters : no parameters | +------------------------------------------------------------------------------ */ GLOBAL void sig_arb_pap_open_req () { T_desc2* packet; TRACE_ISIG( "sig_arb_pap_open_req" ); SET_STATE( PPP_SERVICE_PAP, PAP_DOWN ); ppp_data->pap.counter = ppp_data->mc; if(ppp_data->mode EQ PPP_CLIENT) { /* * set new identifier */ ppp_data->pap.nari++; /* * create and send authenticate request packet */ pap_get_sar(&packet); sig_any_ftx_packet_req(DTI_PID_PAP, packet); } if(ppp_data->pap.counter > 0) ppp_data->pap.counter--; sig_any_rt_rrt_req(); } /* sig_arb_pap_open_req() */ /* +------------------------------------------------------------------------------ | Function : sig_arb_pap_down_req +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_ARB_PAP_DOWN_REQ | | Parameters : no parameters | +------------------------------------------------------------------------------ */ GLOBAL void sig_arb_pap_down_req () { TRACE_ISIG( "sig_arb_pap_down_req" ); sig_any_rt_srt_req(); arb_discard_packet(ppp_data->pap.ar_packet); ppp_data->pap.ar_packet = NULL; } /* sig_arb_pap_down_req() */ /* +------------------------------------------------------------------------------ | Function : sig_arb_pap_stop_req +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_ARB_PAP_STOP_REQ | | Parameters : no parameters | +------------------------------------------------------------------------------ */ GLOBAL void sig_arb_pap_stop_req () { TRACE_ISIG( "sig_arb_pap_stop_req" ); sig_any_rt_srt_req(); } /* sig_arb_pap_stop_req() */ /* +------------------------------------------------------------------------------ | Function : sig_arb_pap_to_req +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_ARB_PAP_TO_REQ | | Parameters : no parameters | +------------------------------------------------------------------------------ */ GLOBAL void sig_arb_pap_to_req () { T_desc2* packet; TRACE_ISIG( "sig_arb_pap_to_req" ); if (ppp_data->pap.counter EQ 0) { /* * authentication failed (client and server mode) */ if((ppp_data->ppp_cause EQ 0) && (ppp_data->mode EQ PPP_CLIENT)) ppp_data->ppp_cause = PPP_TERM_NO_RESPONSE; sig_any_arb_tlf_ind(); } else { if(ppp_data->mode EQ PPP_CLIENT) { /* * send new authentication request packet */ pap_get_sar(&packet); sig_any_ftx_packet_req(DTI_PID_PAP, packet); } else /* server mode */ { switch( GET_STATE( PPP_SERVICE_PAP ) ) { case PAP_UP: /* * send new authentication ack packet */ pap_get_saa(&packet); sig_any_ftx_packet_req(DTI_PID_PAP, packet); break; } } /* * restart timer */ ppp_data->pap.counter--; sig_any_rt_rrt_req(); } } /* sig_arb_pap_to_req() */