view src/g23m-fad/ra/ra_shm.c @ 629:3231dd9b38c1

armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 90eb61ecd093
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-F&D (8411)
|  Modul   :  RA_SHM
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This Modul defines the functions for accessing the
|             shared memory segment between MCU and DSP
+----------------------------------------------------------------------------- 
*/ 

#ifndef RA_SHM_C
#define RA_SHM_C
#endif

#define ENTITY_RA

/*==== INCLUDES ===================================================*/

#include <string.h>
#include "typedefs.h"
#include "pconst.cdg"
#include "vsi.h"
#include "custom.h"
#include "gsm.h"
#include "cnf_ra.h"
#include "prim.h"
#include "pei.h"
#include "tok.h"
#include "ccdapi.h"
#include "ra.h"

/*==== CONST ======================================================*/
/*==== TYPES ======================================================*/
/*==== VARIABLES ==================================================*/
/*==== FUNCTIONS ==================================================*/

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)        MODULE  : RA_SHM                   |
| STATE   : code                  ROUTINE : shm_set_dsp_buffer       |
+--------------------------------------------------------------------+

  PURPOSE :
*/

GLOBAL USHORT shm_set_dsp_buffer(T_FRAME_DESC *data, register USHORT *buffer, USHORT offs, USHORT free)
{
  register UBYTE  *b;
  USHORT len, segment;

  buffer = (USHORT*) ( ( (UBYTE*) buffer ) + offs );
  /*
   * write the both segments specified by the frame descriptor data to the DSP mem.
   */
  for (segment = 0; segment < 2; segment++)
  {
    /*
     * limitate the length fields;
     */
    len = free;

    if (len > data->Len[segment])
      len = data->Len[segment];

    if (len)
    {
      data->Len[segment] -= len;
      b = data->Adr[segment];
      {
        memcpy( (UBYTE*) buffer, (UBYTE*) b, (USHORT) len );
        buffer = (USHORT*) ( ( (UBYTE*) buffer ) + len );
        free -= len;
        offs += len;
      }
    }
  }
  return offs;
}

GLOBAL U8 shm_set_dsp_buffer_new(T_FD *pFD, USHORT *buffer, U8 offs, U8 free)
{
  U8 len;

  buffer = (USHORT*)(((UBYTE*)buffer) + offs);
  /*
   * limitate the length fields;
   */
  len = MINIMUM(free, pFD->len);
  if (len)
  {
    memcpy((UBYTE*)buffer, (UBYTE*)pFD->buf, (USHORT)len);
    buffer = (USHORT*)(((UBYTE*)buffer) + len);
  }
  return len;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)        MODULE  : RA_SHM                   |
| STATE   : code                  ROUTINE : shm_get_dsp_buffer       |
+--------------------------------------------------------------------+

  PURPOSE :

*/
GLOBAL USHORT shm_get_dsp_buffer(T_FRAME_DESC *data, register USHORT *buffer, USHORT bytes_to_read)
{
  register UBYTE  *b;
  USHORT  offs = 0;
  USHORT  len, segment;
  /*
   * read the both segments specified by the frame descriptor data from the DSP mem
   */
  for (segment = 0; segment < 2; segment++)
  {
    len = MINIMUM(data->Len[segment], bytes_to_read);
    if (len)
    {
      data->Len[segment] -= len;
      b = data->Adr[segment];
#ifdef TI_PS_16BIT_CPY
      api_memcpy((UBYTE*)b, (UBYTE*)buffer, (USHORT)len );
#else
      memcpy((UBYTE*)b, (UBYTE*)buffer, (USHORT)len );
#endif
      buffer = (USHORT*)(((UBYTE*)buffer) + len);
      bytes_to_read -= len;
      offs += len;
    }
  }
  return offs;
}

GLOBAL U8 shm_get_dsp_buffer_new(USHORT *buffer, U8 bytes_to_read, T_FD *pFD)
{
  U8 len = MINIMUM(pFD->len, bytes_to_read);
  if (len)
  {
    pFD->len = len;
#ifdef TI_PS_16BIT_CPY
    api_memcpy(pFD->buf, (UBYTE*)buffer, len);
#else
    memcpy(pFD->buf, (UBYTE*)buffer, len);
#endif
  }
  return len;
}