FreeCalypso > hg > fc-magnetite
view src/g23m-gprs/gmm/gmm_txs.c @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 02 Jan 2020 05:38:26 +0000 |
parents | 219afcfc6250 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GPRS (8441) | Modul : gmm_txs.c +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This modul is part of the entity GMM and implements all | functions to handles the incoming process internal signals as | described in the SDL-documentation (TX-statemachine) +----------------------------------------------------------------------------- */ #ifndef GMM_TXS_C #define GMM_TXS_C #endif #define ENTITY_GMM /*==== INCLUDES =============================================================*/ #include "typedefs.h" /* to get Condat data types */ #include "vsi.h" /* to get a lot of macros */ #include "macdef.h" #include "gprs.h" #include "gsm.h" /* to get a lot of macros */ #include "ccdapi.h" /* to get CCD API */ #include "cnf_gmm.h" /* to get cnf-definitions */ #include "mon_gmm.h" /* to get mon-definitions */ #include "prim.h" /* to get the definitions of used SAP and directions */ #include "gmm.h" /* to get the global entity definitions */ #include "gmm_txf.h" /* to get the local funktions */ /*==== CONST ================================================================*/ /*==== LOCAL VARS ===========================================================*/ /*==== PRIVATE FUNCTIONS ====================================================*/ /*==== PUBLIC FUNCTIONS =====================================================*/ /* +------------------------------------------------------------------------------ | Function : sig_kern_tx_data_req +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_KERN_TX_DATA_REQ | | Parameters : void | +------------------------------------------------------------------------------ */ GLOBAL void sig_kern_tx_data_req ( T_TLLI_TYPE tlli_type, UBYTE msg_type ) { TRACE_ISIG( "sig_kern_tx_data_req" ); tx_unitdata_req ( tlli_type, msg_type ); } /* sig_kern_tx_data_req() */ /* +------------------------------------------------------------------------------ | Function : sig_rx_tx_data_req +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_KERN_TX_DATA_REQ | | Parameters : void | +------------------------------------------------------------------------------ */ GLOBAL void sig_rx_tx_data_req ( T_TLLI_TYPE tlli_type, UBYTE msg_type ) { TRACE_ISIG( "sig_rx_tx_data_req" ); #ifdef _SIMULATION_ switch ( msg_type ) { case ATTACH_REQUEST: TRACE_EVENT ( " send: ATTACH_REQUEST");break; case ATTACH_ACCEPT: TRACE_EVENT ( " send: ATTACH_ACCEPT");break; case ATTACH_COMPLETE: TRACE_EVENT ( " send: ATTACH_COMPLETE");break; case ATTACH_REJECT: TRACE_EVENT ( " send: ATTACH_REJECT");break; case D_DETACH_REQUEST: TRACE_EVENT ( " send: DETACH_REQUEST");break; case D_DETACH_ACCEPT: TRACE_EVENT ( " send: DETACH_ACCEPT");break; case ROUTING_AREA_UPDATE_REQUEST: TRACE_EVENT ( " send: RAU_REQUEST");break; case ROUTING_AREA_UPDATE_ACCEPT: TRACE_EVENT ( " send: RAU_ACCEPT");break; case ROUTING_AREA_UPDATE_COMPLETE: TRACE_EVENT ( " send: RAU_COMPLETE");break; case ROUTING_AREA_UPDATE_REJECT: TRACE_EVENT ( " send: RAU_REJ");break; case P_TMSI_REALLOCATION_COMMAND: TRACE_EVENT ( " send: P_TMSI_REALLOCATION_COMMAND");break; case P_TMSI_REALLOCATION_COMPLETE: TRACE_EVENT ( " send: P_TMSI_REALLOCATION_COMPLETE");break; case AUTHENTICATION_AND_CIPHERING_REQUEST: TRACE_EVENT ( " send: AUTHENTICATION_AND_CIPHERING_REQUEST");break; case AUTHENTICATION_AND_CIPHERING_RESPONSE: TRACE_EVENT ( " send: ATTACH_REQUEST");break; case AUTHENTICATION_AND_CIPHERING_REJECT: TRACE_EVENT ( " send: AUTHENTICATION_AND_CIPHERING_REJECT");break; case IDENTITY_REQUEST: TRACE_EVENT ( " send: IDENTITY_REQUEST");break; case IDENTITY_RESPONSE: TRACE_EVENT ( " send: IDENTITY_RESPONSE");break; case GMM_STATUS: TRACE_EVENT ( " send: GMM_STATUS");break; case GMM_INFORMATION: TRACE_EVENT ( " send: GMM_INFORMATION");break; default: break; } #endif /* _SIMULATION_ */ tx_unitdata_req ( tlli_type, msg_type ); } /* sig_rx_tx_data_req() */