FreeCalypso > hg > fc-magnetite
view src/g23m-gprs/grlc/grlc_tpcs.c @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 02 Jan 2020 05:38:26 +0000 |
parents | 219afcfc6250 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GPRS (8441) | Modul : GRLC +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module implements signal handler functions for service | TPC of entity GRLC. +----------------------------------------------------------------------------- */ #ifndef GRLC_TPCS_C #define GRLC_TPCS_C #endif /* #ifndef GRLC_TPCS_C */ #define ENTITY_GRLC /*==== INCLUDES =============================================================*/ #include <string.h> #include "typedefs.h" #include "vsi.h" #include "macdef.h" #include "gprs.h" #include "gsm.h" #include "ccdapi.h" #include "prim.h" #include "message.h" #include "grlc.h" #include "grlc_tpcg.h" #include "grlc_tpcs.h" #include "grlc_meass.h" /*==== CONST ================================================================*/ /*==== DIAGNOSTICS ==========================================================*/ /*==== LOCAL VARS ===========================================================*/ /*==== PRIVATE FUNCTIONS ====================================================*/ LOCAL void tpc_update_pch ( void ); LOCAL void tpc_reset_fix_pwr_par ( void ); /*==== PUBLIC FUNCTIONS =====================================================*/ /* +------------------------------------------------------------------------------ | Function : sig_pei_config_tpc_set_pwr_par +------------------------------------------------------------------------------ | Description : ... | | Parameters : ... | +------------------------------------------------------------------------------ */ GLOBAL void sig_pei_config_tpc_set_pwr_par( UBYTE alpha, UBYTE gamma ) { TRACE_ISIG( "sig_pei_config_tpc_set_pwr_par" ); if( alpha NEQ TPC_ALFGAM_NOT_PRESENT AND gamma NEQ TPC_ALFGAM_NOT_PRESENT ) { UBYTE i; /* used for counting */ grlc_data->tpc.v_fix_pwr_par = TRUE; /* process parameter alpha */ grlc_data->tpc.fix_pwr_par.alpha = alpha; /* process parameter gamma */ for( i = 0; i < MAC_MAX_TIMESLOTS; i++ ) { grlc_data->tpc.fix_pwr_par.gamma_ch[i] = gamma; } } else { tpc_reset_fix_pwr_par( ); } } /* sig_pei_config_tpc_set_pwr_par() */ /* +------------------------------------------------------------------------------ | Function : sig_pei_config_tpc_fix_pcl +------------------------------------------------------------------------------ | Description : ... | | Parameters : ... | +------------------------------------------------------------------------------ */ GLOBAL void sig_pei_config_tpc_fix_pcl ( UBYTE pcl ) { TRACE_ISIG( "sig_pei_config_tpc_fix_pcl" ); grlc_data->tpc.fix_pcl = pcl; } /* sig_pei_config_tpc_fix_pcl() */ /* +------------------------------------------------------------------------------ | Function : sig_gff_tpc_pwr_ctrl_ind +------------------------------------------------------------------------------ | Description : Handles the signal SIG_GFF_TPC_PWR_CTRL_IND | | Parameters : *mac_pwr_ctrl_ind - Ptr to primitive MAC_PWR_CTRL_IND | +------------------------------------------------------------------------------ */ GLOBAL void sig_gff_tpc_pwr_ctrl_ind ( T_MAC_PWR_CTRL_IND * mac_pwr_ctrl_ind ) { TRACE_ISIG( "sig_gff_tpc_pwr_ctrl_ind" ); meas_c_val_update_ptm( mac_pwr_ctrl_ind, &grlc_data->tpc.glbl_pwr_par, &grlc_data->tm.freq_param ); meas_sv_update( mac_pwr_ctrl_ind, &grlc_data->tpc.glbl_pwr_par, &grlc_data->tm.freq_param ); tpc_update_pch( ); } /* sig_gff_tpc_pwr_ctrl_ind() */ /* +------------------------------------------------------------------------------ | Function : sig_tm_tpc_update_pch +------------------------------------------------------------------------------ | Description : Handles the signal SIG_TM_TPC_UPDATE_PCH | | Parameters : | +------------------------------------------------------------------------------ */ GLOBAL void sig_tm_tpc_update_pch ( void ) { TRACE_ISIG( "sig_tm_tpc_update_pch" ); tpc_update_pch( ); } /* sig_tm_tpc_update_pch() */ /* +------------------------------------------------------------------------------ | Function : tpc_grlc_init +------------------------------------------------------------------------------ | Description : The function tpc_grlc_init() initialize the services TPC | | Parameters : void | +------------------------------------------------------------------------------ */ GLOBAL void tpc_grlc_init ( void ) { TRACE_FUNCTION( "tpc_grlc_init" ); /* init power control parameter */ tpc_reset_fix_pwr_par( ); grlc_data->tpc.fix_pcl = TPC_SWITCHED_ON; #if !defined (NTRACE) grlc_data->tpc.n_tpc_trace = 0; #endif /* #if !defined (NTRACE) */ } /* tpc_grlc_init() */ /* +------------------------------------------------------------------------------ | Function : tpc_update_pch +------------------------------------------------------------------------------ | Description : This function calculates the transmit output power | | Parameters : void | +------------------------------------------------------------------------------ */ LOCAL void tpc_update_pch ( void ) { UBYTE *pch; SHORT nop; /* nominal output power applied by the MS */ SHORT pms_max; /* maximum output power applied by the MS */ LONG summand; LONG gamma_ch; LONG c_value; T_MS_PWR_CAP mspc; /* MS power capabilities */ T_C_FILTER *c_data = &grlc_data->meas.c_filter; T_CGRLC_pwr_ctrl_param *pwr_par = &grlc_data->tpc.pwr_par; UBYTE pcl; /* power control level */ UBYTE i; /* used for counting */ UBYTE alpha; #if !defined (NTRACE) BOOL tracing = FALSE; #endif /* #if !defined (NTRACE) */ TRACE_FUNCTION( "tpc_update_pch" ); if( grlc_data->tpc.pch_buffer.pch_idx EQ PCH_IDX_A ) { pch = &grlc_data->tpc.pch_buffer.pch_array[PCH_IDX_B].pch[0]; } else { pch = &grlc_data->tpc.pch_buffer.pch_array[PCH_IDX_A].pch[0]; } tpc_get_ms_pwr_cap( grlc_data->tm.freq_param.pdch_band, &mspc ); pms_max = grlc_data->tpc.glbl_pwr_par.pwr_max; if( grlc_data->tpc.pwr_par.alpha NEQ CGRLC_ALPHA_INVALID ) { alpha = grlc_data->tpc.pwr_par.alpha; } else { alpha = grlc_data->tpc.glbl_pwr_par.alpha; } if( grlc_data->tpc.fix_pcl NEQ TPC_SWITCHED_ON ) { #if !defined (NTRACE) for( i = 0; i < MAC_MAX_TIMESLOTS; i++ ) { if( pch[i] NEQ grlc_data->tpc.fix_pcl ) { tracing = TRUE; } } #endif /* #if !defined (NTRACE) */ memset( pch, grlc_data->tpc.fix_pcl, MAC_MAX_TIMESLOTS ); } else { /* * select the used power parameter, either the data received * from BSS or the data received by dynamic configuration */ if( grlc_data->tpc.v_fix_pwr_par EQ TRUE ) { pwr_par = &grlc_data->tpc.fix_pwr_par; alpha = grlc_data->tpc.fix_pwr_par.alpha; } if( c_data->index EQ 0 AND alpha NEQ 0 ) { pcl = tpc_get_pcl( mspc.p_control, pms_max ); #if !defined (NTRACE) for( i = 0; i < MAC_MAX_TIMESLOTS; i++ ) { if( pch[i] NEQ pcl ) { tracing = TRUE; } } #endif /* #if !defined (NTRACE) */ memset( pch, pcl, MAC_MAX_TIMESLOTS ); } else { /* process parameter summand */ c_value = ( 63 * MEAS_ACRCY ) - c_data->value; summand = ( MEAS_ACRCY * mspc.gamma_0 ) + ( ( alpha * c_value ) / 10 ); /* set the power control level for each timeslot */ for( i = 0; i < MAC_MAX_TIMESLOTS; i++ ) { if( pwr_par->gamma_ch[i] NEQ CGRLC_GAMMA_INVALID ) { gamma_ch = 2 * MEAS_ACRCY * pwr_par->gamma_ch[i]; nop = MINIMUM( summand - gamma_ch, pms_max * MEAS_ACRCY ) / MEAS_ACRCY; if( nop < mspc.pwr_min ) { nop = mspc.pwr_min; } } else { nop = pms_max; } pcl = tpc_get_pcl( mspc.p_control, nop ); #if !defined (NTRACE) if( pch[i] NEQ pcl ) { tracing = TRUE; } #endif /* #if !defined (NTRACE) */ pch[i] = pcl; } } } #if !defined (NTRACE) if( ( grlc_data->tpc.n_tpc_trace & M_TPC_TRACE_STATIC ) OR ( grlc_data->tpc.n_tpc_trace & M_TPC_TRACE_CHANGE AND tracing EQ TRUE ) ) { ULONG trace[8]; trace[0] = ( grlc_data->tpc.glbl_pwr_par.t_avg_t << 24 ); trace[0] |= ( grlc_data->tpc.glbl_pwr_par.pb << 16 ); trace[0] |= ( grlc_data->tpc.glbl_pwr_par.pc_meas_chan << 8 ); trace[0] |= ( grlc_data->tpc.glbl_pwr_par.pwr_max << 0 ); trace[1] = ( grlc_data->tm.freq_param.pdch_hopping << 24 ); trace[1] |= ( grlc_data->tm.freq_param.pdch_band << 16 ); trace[1] |= ( grlc_data->tpc.glbl_pwr_par.alpha << 8 ); trace[1] |= ( grlc_data->tpc.pwr_par.alpha << 0 ); trace[2] = ( grlc_data->tpc.fix_pwr_par.alpha << 24 ); trace[2] |= ( grlc_data->tpc.fix_pcl << 16 ); trace[2] |= ( grlc_data->tpc.pch_buffer.pch_idx << 8 ); trace[3] = 0x00000000; trace[4] = 0x00000000; for( i = 0; i < MAC_MAX_TIMESLOTS; i++ ) { trace[( i / 4 ) + 3] |= ( pwr_par->gamma_ch[i] << ( 24 - ( 8 * ( i % 4 ) ) ) ); } trace[5] = ( c_data->index << 16 ); trace[5] |= ( c_data->value << 0 ); trace[6] = ( pch[0] << 24 ); trace[6] |= ( pch[1] << 16 ); trace[6] |= ( pch[2] << 8 ); trace[6] |= ( pch[3] << 0 ); trace[7] = ( pch[4] << 24 ); trace[7] |= ( pch[5] << 16 ); trace[7] |= ( pch[6] << 8 ); trace[7] |= ( pch[7] << 0 ); TRACE_EVENT_P8( "TPC: %08X %08X %08X %08X %08X %08X %08X %08X", trace[0], trace[1], trace[2], trace[3], trace[4], trace[5], trace[6], trace[7] ); } #endif /* #if !defined (NTRACE) */ if( grlc_data->tpc.pch_buffer.pch_idx EQ PCH_IDX_A ) { grlc_data->tpc.pch_buffer.pch_idx = PCH_IDX_B; } else { grlc_data->tpc.pch_buffer.pch_idx = PCH_IDX_A; } } /* tpc_update_pch() */ /* +------------------------------------------------------------------------------ | Function : tpc_get_pch +------------------------------------------------------------------------------ | Description : | | Parameters : | +------------------------------------------------------------------------------ */ GLOBAL void tpc_get_pch ( UBYTE *pch_dest ) { UBYTE *pch_src; TRACE_FUNCTION( "tpc_get_pch" ); if( grlc_data->tpc.pch_buffer.pch_idx EQ PCH_IDX_A ) { pch_src = &grlc_data->tpc.pch_buffer.pch_array[PCH_IDX_A].pch[0]; } else { pch_src = &grlc_data->tpc.pch_buffer.pch_array[PCH_IDX_B].pch[0]; } memcpy( pch_dest, pch_src, MAC_MAX_TIMESLOTS ); } /* tpc_get_pch() */ /* +------------------------------------------------------------------------------ | Function : tpc_set_pwr_ctrl_param +------------------------------------------------------------------------------ | Description : | | Parameters : | +------------------------------------------------------------------------------ */ GLOBAL void tpc_set_pwr_ctrl_param ( T_CGRLC_pwr_ctrl_param *pwr_ctrl_param ) { TRACE_FUNCTION( "tpc_set_pwr_ctrl_param" ); grlc_data->tpc.pwr_par = *pwr_ctrl_param; } /* tpc_set_pwr_ctrl_param() */ /* +------------------------------------------------------------------------------ | Function : tpc_set_glbl_pwr_ctrl_param +------------------------------------------------------------------------------ | Description : | | Parameters : | +------------------------------------------------------------------------------ */ GLOBAL void tpc_set_glbl_pwr_ctrl_param ( T_CGRLC_glbl_pwr_ctrl_param *glbl_pwr_ctrl_param ) { TRACE_FUNCTION( "tpc_set_glbl_pwr_ctrl_param" ); grlc_data->tpc.glbl_pwr_par = *glbl_pwr_ctrl_param; } /* tpc_set_glbl_pwr_ctrl_param() */ /* +------------------------------------------------------------------------------ | Function : tpc_reset_fix_pwr_par +------------------------------------------------------------------------------ | Description : | | Parameters : | +------------------------------------------------------------------------------ */ LOCAL void tpc_reset_fix_pwr_par ( void ) { UBYTE i; /* used for counting */ TRACE_FUNCTION( "tpc_reset_fix_pwr_par" ); grlc_data->tpc.v_fix_pwr_par = FALSE; /* process parameter alpha */ grlc_data->tpc.fix_pwr_par.alpha = TPC_ALFGAM_NOT_PRESENT; /* process parameter gamma */ for( i = 0; i < MAC_MAX_TIMESLOTS; i++ ) { grlc_data->tpc.fix_pwr_par.gamma_ch[i] = TPC_ALFGAM_NOT_PRESENT; } } /* tpc_reset_fix_pwr_par() */