view src/g23m-gprs/llc/llc_irxs.c @ 629:3231dd9b38c1

armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 219afcfc6250
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   :  
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This modul is part of the entity LLC and implements all 
|             functions to handles the incoming process internal signals as  
|             described in the SDL-documentation (IRX-statemachine)
+----------------------------------------------------------------------------- 
*/ 

#ifndef LLC_IRXS_C
#define LLC_IRXS_C
#endif

#define ENTITY_LLC

/*==== INCLUDES =============================================================*/

#include "typedefs.h"   /* to get Condat data types */
#include "vsi.h"        /* to get a lot of macros */
#include "macdef.h"
#include "gprs.h"
#include "gsm.h"        /* to get a lot of macros */
#include "cnf_llc.h"    /* to get cnf-definitions */
#include "mon_llc.h"    /* to get mon-definitions */
#include "prim.h"       /* to get the definitions of used SAP and directions */
#include "llc.h"        /* to get the global entity definitions */

#include "llc_irxf.h"    /* to get IRX helper functions */
#include "llc_irxl.h"    /* to get IRX label functions */
#include "llc_itxs.h"    /* to get IRX/ITX signals */
#include "llc_us.h"      /* to get U signals */


/*==== CONST ================================================================*/

/*==== LOCAL VARS ===========================================================*/

/*==== PRIVATE FUNCTIONS ====================================================*/

/*==== PUBLIC FUNCTIONS =====================================================*/



/*
+------------------------------------------------------------------------------
| Function    : sig_llme_irx_assign_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_LLME_IRX_ASSIGN_REQ
|
| Parameters  : 
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_llme_irx_assign_req (void)
{ 
  TRACE_ISIG( "sig_llme_irx_assign_req" );
  
  switch (GET_STATE(IRX))
  {
    case IRX_TLLI_UNASSIGNED:
      /*
       * Initialise current incarnation.
       */
      irx_init_sapi();
      SET_STATE (IRX, IRX_TLLI_ASSIGNED);
      break;

    default:
      TRACE_ERROR( "SIG_LLME_IRX_ASSIGN_REQ unexpected" );
      break;
  }
} /* sig_llme_irx_assign_req() */


/*
+------------------------------------------------------------------------------
| Function    : sig_llme_irx_unassign_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_LLME_IRX_UNASSIGN_REQ
|
| Parameters  : 
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_llme_irx_unassign_req (void)
{ 
  TRACE_ISIG( "sig_llme_irx_unassign_req" );
  
  switch (GET_STATE(IRX))
  {
    case IRX_TLLI_UNASSIGNED:
      /*
       * Ignore unexpected signal
       */
      break;

    default:
      /*
       * Delete stored I frames and change to state TLLI_UNASSIGNED
       */
      irx_queue_clean();
      irx_init_sapi();
      SET_STATE (IRX, IRX_TLLI_UNASSIGNED);
      break;
  }
} /* sig_llme_irx_unassign_req() */


/*
+------------------------------------------------------------------------------
| Function    : sig_llme_irx_reset_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_LLME_IRX_RESET_REQ
|
| Parameters  : 
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_llme_irx_reset_req (void)
{ 
  TRACE_ISIG( "sig_llme_irx_reset_req" );

 
  switch (GET_STATE(IRX))
  {
    case IRX_TLLI_UNASSIGNED:
    case IRX_TLLI_ASSIGNED:
      /*
       * Ignore signal.
       */
      break;

    case IRX_ABM:
    case IRX_ABM_BUSY:
      /*
       * Delete stored I frames and change to state TLLI_UNASSIGNED
       */
      irx_queue_clean();
      irx_init_sapi();
      SET_STATE (IRX, IRX_TLLI_ASSIGNED);
      break;

    default:
      TRACE_ERROR( "SIG_LLME_IRX_RESET_REQ unexpected" );
      break;
  }
} /* sig_llme_irx_reset_req() */



/*
+------------------------------------------------------------------------------
| Function    : sig_llme_irx_abmest_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_LLME_IRX_ABMEST_REQ
|
| Parameters  : 
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_llme_irx_abmest_req (void)
{ 
  TRACE_ISIG( "sig_llme_irx_abmest_req" );

  switch (GET_STATE(IRX))
  {
    case IRX_TLLI_ASSIGNED:
      /*
       * Initialize ABM operation
       */
      irx_init_abm();
      SET_STATE (IRX, IRX_ABM);
      break;

    case IRX_ABM:
    case IRX_ABM_BUSY:
      /*
       * Delete stored I frames and re-initialize ABM operation
       */
      irx_queue_clean();
      irx_init_abm();
      SET_STATE (IRX, IRX_ABM);
      break;

    default:
      TRACE_ERROR( "SIG_LLME_IRX_ABMEST_REQ unexpected" );
      break;
  }
} /* sig_llme_irx_abmest_req() */



/*
+------------------------------------------------------------------------------
| Function    : sig_llme_irx_abmrel_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_LLME_IRX_ABMREL_REQ
|
| Parameters  : 
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_llme_irx_abmrel_req (void)
{ 
  TRACE_ISIG( "sig_llme_irx_abmrel_req" );
 
  switch (GET_STATE(IRX))
  {
    case IRX_ABM:
    case IRX_ABM_BUSY:
      /*
       * Delete stored I frames and end ABM operation
       */
      irx_queue_clean();
      irx_init_sapi();
      SET_STATE (IRX, IRX_TLLI_ASSIGNED);
      break;

    default:
      /* TRACE_ERROR( "SIG_LLME_IRX_ABMREL_REQ unexpected" ); but ok */
      break;
  }
} /* sig_llme_irx_abmrel_req() */



/*
+------------------------------------------------------------------------------
| Function    : sig_rx_irx_data_ind
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_RX_IRX_DATA_IND
|
| Parameters  : ll_unitdata_ind - a valid pointer to an LL-UNITDATA-IND 
|                                 primitive
|               command    - contains the command within the primitive
|               frame_type - type of PDU (I or S frame)
|               cr_bit     - setting of the CR bit
|               a_bit      - setting of the A bit
|               ns         - send sequence number of the frame 
|               nr         - receive sequence number of the frame
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_rx_irx_data_ind (T_LL_UNITDATA_IND *ll_unitdata_ind,
                                 T_COMMAND         command, 
                                 T_PDU_TYPE        frame_type,
                                 T_BIT             cr_bit,
                                 T_BIT             a_bit,
                                 T_FRAME_NUM       ns, 
                                 T_FRAME_NUM       nr)
{
  UBYTE     state;

  TRACE_ISIG( "sig_rx_irx_data_ind" );
  
#ifdef TRACE_EVE
    {
      static char* sf[] = { "RR", "ACK", "RNR", "SACK" };

      if(command <= 3)
      {
        if(frame_type == I_FRAME)
        {
          TRACE_4_INFO("got %s I-Frame NS:%d NR:%d A:%d", sf[command], ns, nr, a_bit);
        }
        else
        {
          TRACE_3_INFO("got %s S-Frame NR:%d A:%d", sf[command], nr, a_bit);
        }
      }
    }
#endif

  llc_data->u->current_tlli = ll_unitdata_ind->tlli;

  switch ( (state = GET_STATE(IRX)) )
  {
    case IRX_TLLI_ASSIGNED:
      /*
       * Send a DM response to any valid command received, that 
       * cannot be handeled (GSM 4.64 Release 6.7.0 Chapter 6.4.1.4)
       */
      TRACE_0_INFO("S- or I/S-Frame received in unexpected state");
      
      PFREE (ll_unitdata_ind);

      sig_irx_u_no_frame_expected_ind();
      break;

    case IRX_ABM:
    case IRX_ABM_BUSY:
      /*
       * va <= nr <= vs 
       */
      if ( FRAME_NUM_VALID (llc_data->sapi->va, nr, llc_data->sapi->vs) )
      {
        /*
         * frame valid
         */
        irx_ack_all_to ((T_FRAME_NUM)(nr - 1));

        switch (command)
        {
          case I_RR:
            /*
             * Label IRX_RR
             */
            sig_irx_itx_peer_ready_ind();
            break;

          case I_ACK:
            /*
             * Label IRX_ACK
             */
            sig_irx_itx_ack_ind (FALSE, nr );
            sig_irx_itx_ack_ind (TRUE, (T_FRAME_NUM)(nr + 1));
            sig_irx_itx_cnf_l3data_req ();
            sig_irx_itx_peer_ready_ind ();
            break;

          case I_SACK:
            /*
             * Label IRX_SACK
             */
            sig_irx_itx_ack_ind (FALSE, nr);
            irx_handle_sack (nr, ll_unitdata_ind, frame_type);
            sig_irx_itx_peer_ready_ind();
            break;

          case I_RNR:
            /*
             * Label IRX_RNR
             */
            sig_irx_itx_peer_busy_ind();
            break;

          default:
            TRACE_ERROR( "Unexpected command received" );
            break;
        }
      }
         
      if (frame_type == I_FRAME)
      {
        irx_label_if (ll_unitdata_ind, ns, a_bit, state);
      }
      else /*  S_FRAME */
      {
        if (state == IRX_ABM)
        {
          irx_send_ack (a_bit);
          PFREE (ll_unitdata_ind);
        }
        else
        {
          irx_send_rnr ();
          PFREE (ll_unitdata_ind);
        }
      }
      break;

    default:
      /*
       * Free unexpected data
       */
      PFREE (ll_unitdata_ind);
      TRACE_ERROR( "SIG_RX_IRX_DATA_IND unexpected" );
      break;
  }
} /* sig_rx_irx_data_ind() */



/*
+------------------------------------------------------------------------------
| Function    : sig_itx_irx_s_frame_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_ITX_IRX_S_FRAME_REQ
|
| Parameters  : 
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_itx_irx_s_frame_req (T_ABIT_REQ_TYPE req)
{ 
  TRACE_ISIG( "sig_itx_irx_s_frame_req" );
  
  switch (GET_STATE(IRX))
  {
    case IRX_ABM:
      /*
       * Send an S frame appropriate for the current state
       */
      if ( llc_data->irx->last_ns == NS_EQUAL_VR )
      {
        sig_irx_itx_send_rr_req (req);
      }
      else if ( llc_data->irx->last_ns == NS_EQUAL_VR_PLUS_1 )
      {
        sig_irx_itx_send_ack_req (req);
      }
      else
      {
        T_SACK_BITMAP bitmap;

        irx_build_sack_bitmap( &bitmap );
        sig_irx_itx_send_sack_req (req, &bitmap);
      }
      /* SET_STATE (IRX, SAME_STATE); */
      break;
  

    case IRX_ABM_BUSY:
      /*
       * The appropriate S frame in state busy anytime is an RNR
       */
      sig_irx_itx_send_rnr_req (req);
      /* SET_STATE (IRX, SAME_STATE); */
      break;

    default:
      TRACE_ERROR( "SIG_ITX_IRX_S_FRAME_REQ unexpected" );
      break;
  }
} /* sig_itx_irx_s_frame_req() */