FreeCalypso > hg > fc-magnetite

view src/g23m-gprs/llc/llc_rxf.h @ 629:3231dd9b38c1

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 219afcfc6250
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   :  
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for llc_rxf.c 
+----------------------------------------------------------------------------- 
*/ 


#ifndef LLC_RXF_H
#define LLC_RXF_H


/*
 * Values for frame_rej parameter of rx_interpret_frame().
 */
#define FRAME_NOT_REJ         0x00
#define FRAME_REJ_W1          0x01
#define FRAME_REJ_W3          0x04


EXTERN void rx_init (void);

EXTERN void rx_analyse_ctrl_field (T_GRLC_UNITDATA_IND *grlc_unitdata_ind,
                                   T_PDU_TYPE *frame_type,
                                   UBYTE  *protected_mode,
                                   UBYTE  *sapi,
                                   T_FRAME_NUM *ns,
                                   BOOL   *ciphering,
                                   USHORT *header_size,
                                   BOOL   *frame_ok);

EXTERN void rx_send_decipher_req (T_GRLC_UNITDATA_IND *grlc_unitdata_ind,
                                  T_PDU_TYPE frame_type,
                                  UBYTE protected_mode,
                                  T_FRAME_NUM ns,
                                  USHORT header_size,
                                  BOOL ciphering);

EXTERN void rx_interpret_frame (T_sdu *frame,
                                UBYTE *sapi, 
                                T_PDU_TYPE *pdu_type, 
                                T_COMMAND *command, 
                                T_BIT *cr_bit, 
                                T_BIT *pf_bit, 
                                T_FRAME_NUM *nr, 
                                T_FRAME_NUM *ns, 
                                BOOL *frame_ok, 
                                UBYTE *frame_rej,
                                USHORT *frame_rej_ctrl_length,
                                UBYTE  cipher);

EXTERN void rx_strip_llc_header (T_sdu *sdu, 
                                 T_PDU_TYPE pdu_type,
                                 T_COMMAND command);


#endif /* !LLC_RXS_H */