FreeCalypso > hg > fc-magnetite
view src/g23m-gprs/llc/llc_txp.c @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 02 Jan 2020 05:38:26 +0000 |
parents | 219afcfc6250 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This modul is part of the entity LLC and implements all | functions to handles the incoming primitives as described in | the SDL-documentation (TX-statemachine) +----------------------------------------------------------------------------- */ #ifndef LLC_TXP_C #define LLC_TXP_C #endif #define ENTITY_LLC /*==== INCLUDES =============================================================*/ #include "typedefs.h" /* to get Condat data types */ #include "vsi.h" /* to get a lot of macros */ #include "macdef.h" #include "gprs.h" #include "gsm.h" /* to get a lot of macros */ #include "cnf_llc.h" /* to get cnf-definitions */ #include "mon_llc.h" /* to get mon-definitions */ #include "prim.h" /* to get the definitions of used SAP and directions */ #include "llc.h" /* to get the global entity definitions */ #include "llc_txf.h" /* to get local TX functions */ #include "llc_txl.h" /* to get local TX labels */ #include "llc_uitxs.h" /* to get signal interface to UITX */ #include "llc_itxs.h" /* to get ITX signal definitions */ /*==== CONST ================================================================*/ /*==== LOCAL VARS ===========================================================*/ /*==== PRIVATE FUNCTIONS ====================================================*/ /*==== PUBLIC FUNCTIONS =====================================================*/ /* +------------------------------------------------------------------------------ | Function : tx_grlc_ready_ind +------------------------------------------------------------------------------ | Description : Handles the primitive GRLC_READY_IND | | Parameters : *grlc_ready_ind - Ptr to primitive payload | +------------------------------------------------------------------------------ */ GLOBAL void tx_grlc_ready_ind ( T_GRLC_READY_IND *grlc_ready_ind ) { T_GRLC_DATA_REQ *grlc_data_req; T_GRLC_UNITDATA_REQ *grlc_unitdata_req; T_PRIM_TYPE prim_type; T_SERVICE rx_service; UBYTE sapi; TRACE_FUNCTION( "tx_grlc_ready_ind" ); if (llc_data->grlc_suspended == TRUE) { /* * Ignore it, may be it's due to a collision isse */ PFREE (grlc_ready_ind); TRACE_0_INFO("GRLC_READY_IND ignored"); } else switch( GET_STATE( TX ) ) { case TX_TLLI_UNASSIGNED_NOT_READY: PFREE (grlc_ready_ind); SET_STATE (TX, TX_TLLI_UNASSIGNED_READY); break; case TX_TLLI_ASSIGNED_NOT_READY: PFREE (grlc_ready_ind); do { tx_get_next_frame (&grlc_data_req, &grlc_unitdata_req, &prim_type, &rx_service, &sapi); switch (prim_type) { case PRIM_DATA: /* * Label S_DATA */ tx_label_s_data (rx_service, grlc_data_req); break; case PRIM_UNITDATA: /* * Label S_UNITDATA */ tx_label_s_unitdata (rx_service, grlc_unitdata_req); break; case PRIM_REMOVED: /* * Label S_REMOVED */ tx_label_s_removed (rx_service, sapi); break; default: /* NO_PRIM */ SET_STATE (TX, TX_TLLI_ASSIGNED_READY); break; } } while (prim_type == PRIM_REMOVED); break; default: PFREE (grlc_ready_ind); TRACE_ERROR( "GRLC_READY_IND unexpected" ); break; } } /* tx_grlc_ready_ind() */ /* +------------------------------------------------------------------------------ | Function : tx_grlc_suspend_ready_ind +------------------------------------------------------------------------------ | Description : Handles the primitive GRLC_SUSPEND_READY_IND | | Parameters : *grlc_suspend_ready_ind - Ptr to primitive payload | +------------------------------------------------------------------------------ */ GLOBAL void tx_grlc_suspend_ready_ind ( T_GRLC_SUSPEND_READY_IND *grlc_suspend_ready_ind ) { T_GRLC_DATA_REQ *grlc_data_req; T_GRLC_UNITDATA_REQ *grlc_unitdata_req; T_PRIM_TYPE prim_type; T_SERVICE rx_service; UBYTE sapi; TRACE_FUNCTION( "tx_grlc_suspend_ready_ind" ); if (llc_data->grlc_suspended == FALSE) { /* * Ignore it, may be it's due to a collision isse */ PFREE (grlc_suspend_ready_ind); TRACE_0_INFO("GRLC_SUSPEND_READY_IND ignored"); } else switch( GET_STATE( TX ) ) { case TX_TLLI_UNASSIGNED_NOT_READY: PFREE (grlc_suspend_ready_ind); SET_STATE (TX, TX_TLLI_UNASSIGNED_READY); break; case TX_TLLI_ASSIGNED_NOT_READY: PFREE (grlc_suspend_ready_ind); do { tx_get_next_frame (&grlc_data_req, &grlc_unitdata_req, &prim_type, &rx_service, &sapi); switch (prim_type) { case PRIM_DATA: /* * Label S_DATA */ tx_label_s_data (rx_service, grlc_data_req); break; case PRIM_UNITDATA: /* * Label S_UNITDATA */ tx_label_s_unitdata (rx_service, grlc_unitdata_req); break; case PRIM_REMOVED: /* * Label S_REMOVED */ tx_label_s_removed (rx_service, sapi); break; default: /* NO_PRIM */ SET_STATE (TX, TX_TLLI_ASSIGNED_READY); break; } } while (prim_type == PRIM_REMOVED); break; default: PFREE (grlc_suspend_ready_ind); TRACE_ERROR( "GRLC_SUSPEND_READY_IND unexpected" ); break; } } /* tx_grlc_suspend_ready_ind() */ /* +------------------------------------------------------------------------------ | Function : tx_cci_cipher_cnf +------------------------------------------------------------------------------ | Description : Handles the primitive CCI_CIPHER_CNF. | Note: GRLC_DATA_REQ type is used instead to avoid PPASS. | | Parameters : *grlc_data_req - Ptr to primitive payload | +------------------------------------------------------------------------------ */ GLOBAL void tx_cci_cipher_cnf (T_GRLC_DATA_REQ *grlc_data_req) { T_GRLC_UNITDATA_REQ *grlc_unitdata_req; T_PRIM_TYPE prim_type; T_SERVICE rx_service; UBYTE sapi; TRACE_FUNCTION( "tx_cci_cipher_cnf" ); switch( GET_STATE( TX ) ) { case TX_TLLI_ASSIGNED_NOT_READY: tx_store_buffer (grlc_data_req); break; case TX_TLLI_ASSIGNED_READY: tx_store_buffer (grlc_data_req); do { tx_get_next_frame (&grlc_data_req, &grlc_unitdata_req, &prim_type, &rx_service, &sapi); switch (prim_type) { case PRIM_DATA: /* * Label S_DATA */ tx_label_s_data (rx_service, grlc_data_req); break; case PRIM_UNITDATA: /* * Label S_UNITDATA */ tx_label_s_unitdata (rx_service, grlc_unitdata_req); break; case PRIM_REMOVED: /* * Label S_REMOVED */ tx_label_s_removed (rx_service, sapi); break; default: /* NO_PRIM */ break; } } while (prim_type == PRIM_REMOVED); break; default: PFREE (grlc_data_req); TRACE_ERROR( "CCI_CIPHER_CNF unexpected" ); break; } } /* tx_cci_cipher_cnf() */