view src/g23m-gprs/llc/llc_uirxp.c @ 629:3231dd9b38c1

armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 219afcfc6250
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :
|  Modul   :
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This modul is part of the entity LLC and implements all
|             functions to handles the incoming primitives as described in
|             the SDL-documentation (UIRX-statemachine)
+-----------------------------------------------------------------------------
*/

#ifndef LLC_UIRXP_C
#define LLC_UIRXP_C
#endif

#define ENTITY_LLC

/*==== INCLUDES =============================================================*/

#include "typedefs.h"   /* to get Condat data types */
#include "vsi.h"        /* to get a lot of macros */
#include "macdef.h"
#include "gprs.h"
#include "gsm.h"        /* to get a lot of macros */
#include "cnf_llc.h"    /* to get cnf-definitions */
#include "mon_llc.h"    /* to get mon-definitions */
#include "prim.h"       /* to get the definitions of used SAP and directions */
#include "llc.h"        /* to get the global entity definitions */

#include "llc_uirxf.h"  /* to get queue management prototypes */
/*==== CONST ================================================================*/

/*==== LOCAL VARS ===========================================================*/

/*==== PRIVATE FUNCTIONS ====================================================*/

/*==== PUBLIC FUNCTIONS =====================================================*/



/*
+------------------------------------------------------------------------------
| Function    : uirx_ll_getunitdata_req
+------------------------------------------------------------------------------
| Description : Handles the primitive LL_GETUNITDATA_REQ
|
| Parameters  : *ll_getunitdata_req - Ptr to primitive payload
|
+------------------------------------------------------------------------------
*/
GLOBAL void uirx_ll_getunitdata_req ( T_LL_GETUNITDATA_REQ *ll_getunitdata_req )
{
  T_LL_UNITDATA_IND *ll_unitdata_ind;

  TRACE_FUNCTION( "ll_getunitdata_req" );

  SWITCH_LLC (ll_getunitdata_req->sapi);

  TRACE_1_PARA("s:%d", ll_getunitdata_req->sapi );

  switch (GET_STATE(UIRX))
  {
    case UIRX_TLLI_UNASSIGNED_NOT_READY:
      PFREE (ll_getunitdata_req);
      SET_STATE (UIRX, UIRX_TLLI_UNASSIGNED_READY);
      break;

    case UIRX_ADM_NOT_READY:
      PFREE (ll_getunitdata_req);

      /*
       * First check, if already a frame is waiting.
       */
      if (uirx_queue_retrieve (&ll_unitdata_ind))
      {
        /*
         * A frame is waiting. Send primitive LL-UNITDATA-IND
         * to either SNDCP or GSMS, depending on the SAPI (GMM
         * uses now flow control!).
         */
        switch (ll_unitdata_ind->sapi)
        {
          case LL_SAPI_3:
          case LL_SAPI_5:
          case LL_SAPI_9:
          case LL_SAPI_11:
            TRACE_3_OUT_PARA("s:%d len:%d c:%d", ll_unitdata_ind->sapi,
                                             BYTELEN(ll_unitdata_ind->sdu.l_buf),
                                             ll_unitdata_ind->cipher);
            PSEND (hCommSNDCP, ll_unitdata_ind);
            break;

          case LL_SAPI_7:
#ifdef LL_2to1
            TRACE_PRIM_TO("MM");
            TRACE_3_OUT_PARA("s:%d len:%d c:%d", ll_unitdata_ind->sapi,
                                             BYTELEN(ll_unitdata_ind->sdu.l_buf),
                                             ll_unitdata_ind->cipher);
            PSEND (hCommMM, ll_unitdata_ind);
            break;
#else
            TRACE_PRIM_TO("GSMS");
            TRACE_3_OUT_PARA("s:%d len:%d c:%d", ll_unitdata_ind->sapi,
                                             BYTELEN(ll_unitdata_ind->sdu.l_buf),
                                             ll_unitdata_ind->cipher);
            PSEND (hCommGSMS, ll_unitdata_ind);
            break;
#endif

          default:
            PFREE (ll_unitdata_ind);
            TRACE_ERROR ("Invalid SAPI value");
            break;
        }
      }
      else
      {
        /*
         * No frame is waiting. Allow straight forwarding
         * of the next received frame.
         */
        SET_STATE (UIRX, UIRX_ADM_READY);
      }
      break;

    default:
      PFREE (ll_getunitdata_req);
      TRACE_ERROR( "LL_GETUNITDATA_REQ unexpected" );
      break;
  }

} /* uirx_ll_getunitdata_req() */