FreeCalypso > hg > fc-magnetite
view src/g23m-gsm/mm/mm_forp.c @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 02 Jan 2020 05:38:26 +0000 |
| parents | 27a4235405c6 |
| children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (8410) | Modul : MM_FORP +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This Modul defines the functions for the formatter | capability of the module Mobility Management. +----------------------------------------------------------------------------- */ #ifndef MM_FORP_C #define MM_FORP_C #define ENTITY_MM /*==== INCLUDES ===================================================*/ #if defined (NEW_FRAME) #include <string.h> #include <stdlib.h> #include <stddef.h> #include "typedefs.h" #include "pcm.h" #include "pconst.cdg" #include "mconst.cdg" #include "message.h" #include "ccdapi.h" #include "vsi.h" #include "custom.h" #include "gsm.h" #include "prim.h" #include "cnf_mm.h" #include "mon_mm.h" #include "pei.h" #include "tok.h" #include "mm.h" #else #include <string.h> #include <stdlib.h> #include <stddef.h> #include "stddefs.h" #include "pcm.h" #include "pconst.cdg" #include "mconst.cdg" #include "message.h" #include "ccdapi.h" #include "custom.h" #include "gsm.h" #include "prim.h" #include "cnf_mm.h" #include "mon_mm.h" #include "vsi.h" #include "pei.h" #include "tok.h" #include "mm.h" #endif /*==== EXPORT =====================================================*/ /*==== PRIVAT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ /*==== TEST =====================================================*/ /* * ------------------------------------------------------------------- * PRIMITIVE Processing functions * ------------------------------------------------------------------- */ #if 0 /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : MM_FOR | | STATE : code ROUTINE : for_init_mm_data | +--------------------------------------------------------------------+ PURPOSE : Initialize the MM data for the module formatter. This function is not referenced. */ GLOBAL void for_init_mm_data (void) { TRACE_FUNCTION ("for_init_mm_data()"); } #endif /* #if 0 */ /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : MM_FOR | | STATE : code ROUTINE : for_rr_data_ind | +--------------------------------------------------------------------+ PURPOSE : Process the primitive RR_DATA_IND. */ GLOBAL void for_rr_data_ind (T_RR_DATA_IND *rr_data_ind_org) { GET_INSTANCE_DATA; UBYTE pd; UBYTE ti; U8 *payload; U16 length; /* Implements Measure#32: Row 14,...,24 */ PPASS (rr_data_ind_org, rr_data_ind, RR_DATA_IND); TRACE_FUNCTION ("for_rr_data_ind()"); mm_data->error = 0; GET_PD (rr_data_ind->sdu, pd); GET_TI (rr_data_ind->sdu, ti); if (pd EQ PD_MM) { if (! ti) { T_mob_class_2 mob_class_2; csf_read_mobile_class_2 (&mob_class_2); rr_data_ind->sdu.l_buf -= 8; rr_data_ind->sdu.o_buf += 8; if (ccd_decodeMsg (CCDENT_MM, DOWNLINK, (T_MSGBUF *) &rr_data_ind->sdu, (UBYTE *) _decodedMsg, NOT_PRESENT_8BIT) NEQ ccdOK) { U16 parlist [6]; U8 ccd_err; memset (parlist,0, sizeof (parlist)); ccd_err = ccd_getFirstError (CCDENT_MM, parlist); /* * Error Handling */ do /* Read errors */ { switch (ccd_err) { case ERR_INVALID_MID: /* ignore message & send STATUS #97 */ mm_for_set_error (RC_MESSAGE_TYPE_NOT_IMPLEM); break; case ERR_MSG_LEN: /* will be activated soon by CCD; agreemen in RR if decoding was continued outside MSG-buffer it should be handled as mand. IE missing */ case ERR_MAND_ELEM_MISS: /* ignore message & send STATUS #96 */ case ERR_COMPREH_REQUIRED: /* ignore message & send STATUS #96 */ mm_for_set_error (RC_INVALID_MAND_MESSAGE); break; #if defined (WIN32) /* This part is interesting only in implementation and testing; may be included if specific handling for specific errors is required in future releases */ case ERR_IE_NOT_EXPECTED: /* ignore IE */ case ERR_IE_SEQUENCE: /* ignore IE */ case ERR_MAX_IE_EXCEED: /* ignore IE */ TRACE_EVENT_P1 ("IE ignored, CCD error code = %u", ccd_err); break; case ERR_PATTERN_MISMATCH: case ERR_INVALID_TYPE: TRACE_EVENT_P1 ("MNC decoding erroneous = %u", ccd_err); break; #endif /* #if defined (WIN32) */ default: #if defined (WIN32) TRACE_EVENT_P1 ("Unexpected warnings/errors = %u", ccd_err); #endif /* #if defined (WIN32) */ break; /* No or non-interesting error */ } ccd_err = ccd_getNextError (CCDENT_MM, parlist); } while ( ccd_err NEQ ERR_NO_MORE_ERROR AND !mm_check_critical_error() ); } /* if (ccd_ ... */ if (!mm_check_critical_error()) { /* Implements Measure#32: Row 14,...,24 */ payload = &(rr_data_ind->sdu.buf[0]); /* beginning of buffer */ payload += ((rr_data_ind->sdu.o_buf) >> 3) - 1; /* plus offset (bytes) */ length = ((rr_data_ind->sdu.l_buf) >> 3) + 1; /* length (bytes, bits / 8) */ /* Implements Measure#32: Row 14,...,24 */ switch (_decodedMsg[0]) { case D_AUTH_REJ: TRACE_BINDUMP( mm_handle, TC_USER4, "Down Link: AUTHENTICATION REJECT", payload, length); break; case D_AUTH_REQ: TRACE_BINDUMP( mm_handle, TC_USER4, "Down Link: AUTHENTICATION REQUEST", payload, length); break; case D_CM_SERV_ACCEPT: TRACE_BINDUMP( mm_handle, TC_USER4, "Down Link: CM SERV ACCEPT", payload, length); break; case D_ABORT: TRACE_BINDUMP( mm_handle, TC_USER4, "Down Link: ABORT", payload, length); break; case D_CM_SERV_REJ: TRACE_BINDUMP( mm_handle, TC_USER4, "Down Link: CM SERVICE REJECT", payload, length); break; case D_IDENT_REQ: TRACE_BINDUMP( mm_handle, TC_USER4, "Down Link: IDENTITY REQUEST", payload, length); break; case D_LOC_UPD_ACCEPT: TRACE_BINDUMP( mm_handle, TC_USER4, "Down Link: LOC UPDATE ACCEPT", payload, length); break; case D_LOC_UPD_REJ: TRACE_BINDUMP( mm_handle, TC_USER4, "Down Link: LOC UPDATE REJECT", payload, length); break; case B_MM_STATUS: TRACE_BINDUMP( mm_handle, TC_USER4, "Down Link: MM STATUS", payload, length); break; case D_TMSI_REALLOC_CMD: TRACE_BINDUMP( mm_handle, TC_USER4, "Down Link: TMSI REALLOC COMMAND", payload, length); break; case D_CM_SERVICE_PROMPT: TRACE_BINDUMP( mm_handle, TC_USER4, "Down Link: CM SERVICE PROMPT", payload, length); break; case D_MM_INFORMATION: TRACE_BINDUMP( mm_handle, TC_USER4, "Down Link: MM INFORMATION", payload, length); break; default: /* * message is unknown; if this happens, AIM does not match * implementation */ mm_for_set_error(RC_MESSAGE_TYPE_NOT_IMPLEM); break; } /* switch */ switch (_decodedMsg[0]) { case D_AUTH_REJ: mm_auth_rej (); break; case D_AUTH_REQ: mm_auth_req ((T_D_AUTH_REQ *)_decodedMsg); break; case D_CM_SERV_ACCEPT: mm_cm_serv_accept (); break; case D_ABORT: mm_abort ((T_D_ABORT *)_decodedMsg); break; case D_CM_SERV_REJ: mm_cm_serv_rej (MSG(D_CM_SERV_REJ)); break; case D_IDENT_REQ: mm_ident_req ((T_D_IDENT_REQ *)_decodedMsg); break; case D_LOC_UPD_ACCEPT: mm_loc_upd_acc (MSG(D_LOC_UPD_ACCEPT)); break; case D_LOC_UPD_REJ: mm_lup_rej (MSG(D_LOC_UPD_REJ)); break; case B_MM_STATUS: mm_mm_status (); break; case D_TMSI_REALLOC_CMD: mm_tmsi_realloc_cmd (MSG(D_TMSI_REALLOC_CMD)); break; case D_CM_SERVICE_PROMPT: mm_cm_service_prompt (MSG(D_CM_SERVICE_PROMPT)); break; case D_MM_INFORMATION: mm_mm_information (MSG(D_MM_INFORMATION)); break; default: /* * message is unknown; if this happens, AIM does not match * implementation */ mm_for_set_error(RC_MESSAGE_TYPE_NOT_IMPLEM); break; } /* switch */ } /* if (!mm_check_critical_error() */ } /* if !ti */ } /* if pd EQ PD_MM */ else { if (ti >= 8) ti -= 8; else ti += 8; mm_cm_message (pd, ti, rr_data_ind); return; } /* else if pd EQ PD_MM */ mm_send_status_on_error(); /* handles critical errors preventing AIM from processing */ PFREE (rr_data_ind); /* the message pointer should be freed here */ } #endif