FreeCalypso > hg > fc-magnetite

view src/gpf2/ccd/bitfun.h @ 629:3231dd9b38c1

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 864b8cc0cf63
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   : bitfun.h
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Condat Coder Decoder
|             Prototypes of the elementary bit manipulation functions
+----------------------------------------------------------------------------- 
*/ 


#ifndef __BITFUN
#define __BITFUN


#ifndef __BITFUN_C__

EXTERN void   bf_writePadBits      (T_CCD_Globs *globs);
EXTERN void   bf_writeVal          (ULONG value, ULONG bSize, T_CCD_Globs *globs);
EXTERN ULONG  bf_getBits           (ULONG  len, T_CCD_Globs *globs);
EXTERN void   bf_writeBitStr_PER   (USHORT len, T_CCD_Globs *globs);
EXTERN void   bf_readBitStr_PER    (USHORT len, T_CCD_Globs *globs);
EXTERN void   bf_writeBits         (ULONG  len, T_CCD_Globs *globs);
EXTERN void   bf_readBits          (ULONG  len, T_CCD_Globs *globs);
EXTERN void   bf_writeBitChunk     (ULONG  len, T_CCD_Globs *globs);
EXTERN void   bf_readBitChunk      (ULONG  len, T_CCD_Globs *globs);
EXTERN BOOL   bf_readBit           (T_CCD_Globs *globs);
EXTERN void   bf_writeBit          (BOOL Bit, T_CCD_Globs *globs);
EXTERN UBYTE  bf_decodeByteNumber  (const ULONG len, T_CCD_Globs *globs);
EXTERN ULONG  bf_decodeShortNumber (const ULONG len, T_CCD_Globs *globs);
EXTERN ULONG  bf_decodeLongNumber  (UBYTE len, T_CCD_Globs *globs);
EXTERN void   bf_codeShortNumber   (UBYTE len, USHORT val, T_CCD_Globs *globs);
EXTERN void   bf_codeByteNumber    (UBYTE len, UBYTE val, T_CCD_Globs *globs);
EXTERN void   bf_codeLongNumber    (UBYTE len, ULONG val, T_CCD_Globs *globs);
EXTERN void   bf_recodeShortNumber (USHORT pos, UBYTE len, USHORT val, T_CCD_Globs *globs);
EXTERN void   bf_recodeByteNumber  (USHORT pos, UBYTE len, UBYTE  val, T_CCD_Globs *globs);
EXTERN void   bf_recodeBit         (USHORT pos, UBYTE Bit, T_CCD_Globs *globs);
EXTERN void   bf_rShift8Bit        (USHORT srcBitPos, USHORT bitLen, T_CCD_Globs *globs);

#endif /* __BITFUN_C__ */

/* a Macro for incrementing the position in the bitbuffer         */
/* _bitpos, _bytepos and _byteoffs are recalculated               */

#define bf_incBitpos(A, globs) globs->bitpos = (USHORT)(globs->bitpos+(A));\
                        globs->bytepos = (USHORT)(globs->bitpos >> 3);\
                        globs->byteoffs = (UBYTE)(globs->bitpos & 7)
#define bf_setBitpos(A, globs) globs->bitpos = (USHORT)(A);\
                        globs->bytepos = (USHORT)(globs->bitpos >> 3);\
                        globs->byteoffs = (UBYTE)(globs->bitpos & 7)

/*
 * end of bitstream if we can not read almost 4 bits
 */
#define bf_endOfBitstream(globs) (globs->bitpos >= globs->maxBitpos)

#endif