FreeCalypso > hg > fc-magnetite

view src/gpf2/ccd/makefile @ 629:3231dd9b38c1

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 864b8cc0cf63
children
line wrap: on
line source

#----------------------------------------------------------------------------- 
#  Project :  
#  Modul   :  makefile
#----------------------------------------------------------------------------- 
#  Copyright 2002 Texas Instruments Deutschland GmbH
#                 All rights reserved. 
# 
#                 This file is confidential and a trade secret of Texas 
#                 Instruments Deutschland GmbH
#                 The receipt of or possession of this file does not convey 
#                 any rights to reproduce or disclose its contents or to 
#                 manufacture, use, or sell anything it may describe, in 
#                 whole, or in part, without the specific written consent of 
#                 Texas Instruments Deutschland GmbH. 
#----------------------------------------------------------------------------- 
#  Purpose:   (gnu-) makefile to build libraries of the Condat Coder Decoder
#             targets:  ccd.dll, ccd.lib and clean
#             Hint: To achieve variations of ccd.lib you need to set some 
#             environment variables, e.g. DEBUG and TRACE. To ease the building 
#             process you can also use the batch file "m.bat".
#-----------------------------------------------------------------------------

include ccd_inc.mk

VPATH=$(OBJDIR)

#---------- Directories
GPF:=$(subst \,/,$(GPF))

# force to use sh.exe in gpf
ifneq ($(OSENV), sus)
SHELL=$(GPF)/tools/bin/sh.exe
endif

ifeq "$(CLEARCASE_PRIMARY_GROUP)" ""
  CLRCAS=0
else
  ifeq "$(IN_VOB)" "FALSE"
    CLRCAS=0
  else
    CLRCAS=1
  endif
endif

ifdef PATH_CC_1_22E 
 Path:=$(PATH_CC_1_22E);$(Path)
 PATH:=$(PATH_CC_1_22E);$(PATH)
 C_DIR:=$(PATH_CC_1_22E)
endif

ifeq ($(TOOL_CHOICE), 3)
 COPTS= --align_structs=4 -pden 
 ifndef PATH_CC_2_54 
   PATH_CC_2_54=C:/Dvpt_tools/Codegen/TMS4701x_2.54
 endif
 Path:=$(PATH_CC_2_54)/bin;$(Path)
 INCLUDES += -I"$(PATH_CC_2_54)/include"
endif

ifeq ($(TOOL_CHOICE), 5)
 COPTS= --align_structs=4 -pden 
 ifndef PATH_CC_2_55 
   PATH_CC_2_55=C:/Dvpt_tools/Codegen/TMS4701x_2.55
 endif
 Path:=$(PATH_CC_2_55)/bin;$(Path)
 INCLUDES += -I"$(PATH_CC_2_55)/include"
endif

ifeq ($(TOOL_CHOICE), 6)
  # --code_state=16 => -mt
  # --endian=little => -me
  COPTS= -mv=5e --abi=ti_arm9_abi
  COPTS+= -pden -pdv -mf -ms -qq -disable_branch_chaining -pi
  COPTS+= -O=2
  ifndef PATH_CC_4_11 
    PATH_CC_4_11=C:/Dvpt_tools/Codegen/TMS4701x_4.11
  endif
  Path:=$(PATH_CC_4_11)/bin;$(Path)
  INCLUDES += -I"$(PATH_CC_4_11)/include"
endif

# for created object files
ifeq ($(PLATFORM), )
OBJDIR=obj/ccd/$(TARGET)$(TRACEDIR)$(DEBUGDIR)$(PSDIR)
else
OBJDIR=obj/ccd/$(TARGET)/$(PLATFORM)$(TSDIR)$(TRACEDIR)$(DEBUGDIR)$(PSDIR)$(DADIR)$(SECTION)
endif

# guarantee / as path seperator even if OBJDIR is set with the make call
override OBJDIR:=$(subst \,/,$(OBJDIR))

# for stack calculation
GAWK=$(GPF)/tools/bin/gawk.exe
AWK_PROG=$(GPF)/BIN/cg$(tTail).awk

# for created libraries
LIBDIR=../LIB
BINDIR=../BIN$(DEBUGDIR)

FRAMELIB_DIR	=../lib/win32$(DEBUGDIR)

# for CCD source files
CCD_SRC=./


#---------- shell calls
RM      =       rm -rf
ECHO	= 	@echo
ifeq ($(OSENV), sus)
  MKDIR =       mkdir
else
  MKDIR =       $(GPF)/tools/bin/mkdir
endif

ifeq ($(CLRCAS), 1)
  CHECKOUT = -cleartool co -nda -nc
  CHECKIN = -cleartool ci -nc
else
  CHECKOUT = attrib -r
  CHECKIN = attrib +r
endif

CO_LIBS = $(CCD_LIB)

_CCD_OBJS = ccd.$(OBJTAIL) bitfun.$(OBJTAIL) cdc_std.$(OBJTAIL) \
            cdc_com.$(OBJTAIL) ccd_err.$(OBJTAIL) ccd_store.$(OBJTAIL)\
        gsm1_tv.$(OBJTAIL) gsm1_v.$(OBJTAIL) gsm2_t.$(OBJTAIL) gsm3_tv.$(OBJTAIL) gsm3_v.$(OBJTAIL) gsm4_lv.$(OBJTAIL) \
        gsm4_tlv.$(OBJTAIL) gsm5_tlv.$(OBJTAIL) gsm5_tv.$(OBJTAIL) gsm5_v.$(OBJTAIL) gsm6_tlv.$(OBJTAIL) gsm7_lv.$(OBJTAIL) \
        bcd_mnc.$(OBJTAIL) bcd_nofill.$(OBJTAIL) bcdeven.$(OBJTAIL) bcdodd.$(OBJTAIL) \
        gsm1_asn.$(OBJTAIL) \
        csn1_s1.$(OBJTAIL) csn1_sh.$(OBJTAIL) s_padding.$(OBJTAIL) t30_ident.$(OBJTAIL) \
                asn1_bitstr.$(OBJTAIL) asn1_octet.$(OBJTAIL) asn1_integ.$(OBJTAIL) \
                asn1_seq.$(OBJTAIL) asn1_choice.$(OBJTAIL) no_code.$(OBJTAIL)\
                asn1_choice_ext.$(OBJTAIL) asn1_seq_ext.$(OBJTAIL) asn1_integ_ext.$(OBJTAIL) \
                asn1_opentype.$(OBJTAIL) asn1_objid.$(OBJTAIL)\
                noncritical_ext.$(OBJTAIL) critical_ext.$(OBJTAIL)\
                ccd_elem.$(OBJTAIL) s_padding_0.$(OBJTAIL) csn1_s0.$(OBJTAIL) hl_flag.$(OBJTAIL) \
                freq_list.$(OBJTAIL) fdd_ci.$(OBJTAIL) tdd_ci.$(OBJTAIL) freq_list_com.$(OBJTAIL) \
                csn1_concat.$(OBJTAIL) break_cond.$(OBJTAIL) csn1_sx.$(OBJTAIL) \
                csn1_choice_1.$(OBJTAIL) csn1_choice_2.$(OBJTAIL) csn1_choice_x.$(OBJTAIL) \
                csn1_sh_opt.$(OBJTAIL) csn1_s1_opt.$(OBJTAIL) csn1_s0_opt.$(OBJTAIL)

ifeq ($(TARGET), win32)
_CCD_OBJS += ccd_config.obj ccd_patch.obj
endif

#----------------------------------- Special settings for each target 
#----------Nucleus
ifeq ($(TARGET), nuc)
ifeq ($(PLATFORM), arm7)

   ifeq ($(TOOL_CHOICE), )
    COPTS+= -mw -x -pw2
   endif

   CC=cl470
   COPTS+= -me -mt -q
   ifeq ($(ASM_ONLY), 1)
     COPTS+= -q -n -x0 -fs $(OBJDIR)
     MKLIB = $(GAWK) -f $(AWK_PROG) > $(CCD_LIB)
     OBJTAIL = asm
     CCD_LIB = $(OBJDIR)/ccd$(XXX).pa
   else
     COPTS+= -o 
     MKLIB = ar470  $(LFLAGS)
     LIBEXT = lib
     OBJTAIL = obj
     CCD_LIB = $(LIBDIR)/ccd$(XXX).$(LIBEXT)
   endif

   ifeq ($(DEBUG), 1)
      ifeq ($(TOOL_CHOICE), )
        COPTS += -g
      else
        COPTS += -gt
      endif
      COPTS += -mn   
   endif
   COPTS += -fr $(OBJDIR) -c 

   ifeq ($(TRACE), 1)
     DEFINES += -dDEBUG_CCD -dERR_TRC_STK_CCD
   endif

   ifeq ($(RUN_INT_RAM), 1)
     DEFINES += -dRUN_INT_RAM
   endif

   ifeq ($(RUN_FLASH), 1)
     DEFINES += -dRUN_FLASH
   endif

   ifeq ($(MEMSUPER), 1)
     DEFINES += -dMEMORY_SUPERVISION
   endif

   INCLUDES += -I"." -I"../inc" -I"../inc/nuc"
   ifeq ($(DYNARR), 1)
     DEFINES += -dDYNAMIC_ARRAYS
   endif
   DEFINES += -dM_INTEL -dSHARED_VSI -dSHARED_CCD
   DEFINES += -dCCDDATA_STATIC_DATA
   DEFINES += -d_TMS470 -dNEW_ENTITY -dERR_TRACE_CCD
   COPTSNF  = $(COPTS) $(DEFINES) $(INCLUDES)
   INCLUDELIST = $(INCLUDES)
   DEFINELIST = $(subst -d,-D,$(DEFINES))
   COMMLFLAGS = -rq $@             
   LFLAGS = $(COMMLFLAGS)

endif       # platform: arm7, TI compiler
endif       # target: nucleus OS

#----------Nucleus & arm9
ifeq ($(TARGET), nuc)
ifeq ($(PLATFORM), arm9)

   CC=cl470
   COPTS+= -me -mt -q

   ifeq ($(ASM_ONLY), 1)
     COPTS+= -n -pn -pi -fs $(OBJDIR) 
     MKLIB = $(GAWK) -f $(AWK_PROG) > $(CCD_LIB)
     OBJTAIL = asm
     CCD_LIB = $(OBJDIR)/ccd$(XXX).pa
   else
     COPTS+= -c -o  
     MKLIB=ar470  $(LFLAGS)
     LIBEXT=lib
     OBJTAIL=obj
     CCD_LIB=$(LIBDIR)/ccd$(XXX).$(LIBEXT)
     ifeq ($(DEBUG), 1)
        COPTS += -mn   
     endif
   endif

   ifeq ($(DEBUG), 1)
      ifeq ($(TOOL_CHOICE), 6)
        COPTS += --symdebug:coff
       else
       # toolset 3 and 5
        COPTS += -gt
      endif
      COPTS += -mn   
   endif
   COPTS += -fr $(OBJDIR)

   ifeq ($(TRACE), 1)
     DEFINES += -dDEBUG_CCD -dERR_TRC_STK_CCD
   endif
   ifeq ($(MEMSUPER), 1)
     DEFINES += -dMEMORY_SUPERVISION
   endif

   INCLUDES += -I"." -I"../inc" -I"../inc/nuc" 

   DEFINES += -dM_INTEL -dSHARED_VSI -dCCD_PLUGIN_GSM -dSHARED_CCD
   DEFINES += -dCCDDATA_STATIC_DATA -dDYNAMIC_ARRAYS
   DEFINES += -d_TMS470 -dNEW_ENTITY -dERR_TRACE_CCD
   DEFINES += -dCCDDATA_U32
   ifeq ($(CCD_SYMBOLS), 1)
     DEFINES += -dCCD_SYMBOLS
   endif

   COPTSNF  = $(COPTS) $(DEFINES) $(INCLUDES)
   COMMLFLAGS = -rq $@             
   LFLAGS=$(COMMLFLAGS)

endif       # platform: arm9, TI compiler
endif       # target: nucleus OS

#----------NucleusWin
ifeq ($(TARGET), nuc)
ifeq ($(PLATFORM), pc)

   CC=cl
   COPTS = /c /nologo /W3 /GX /Zp1
   COPTS += /Fo$(OBJDIR)/
   ifeq ($(DEBUG), 1)
     COPTS += /MTd /Z7 
   else
     COPTS += /MT
   endif

   ifeq ($(GLOBS), 1)
     _CCD_OBJS = pc_globs.obj
     CCD_LIB = $(OBJDIR)/pc_globs.exe
     MKLIB = link.exe /out:$@ $(LFLAGS) /INCREMENTAL:NO /PDB:NONE
   else
     CCD_LIB = $(LIBDIR)/ccd$(XXX).$(LIBEXT)
     MKLIB = link.exe -lib /out:$@ $(LFLAGS)
   endif

   ifeq ($(TRACE), 1)
     DEFINES += -DDEBUG_CCD -DERR_TRC_STK_CCD
   endif
   ifeq ($(MEMSUPER), 1)
     DEFINES += -DMEMORY_SUPERVISION
   endif

   INCLUDES = -I"." -I"../inc" -I"../inc/nuc" 
   DEFINES += -D"M_INTEL" -D"SHARED_VSI" -D"SHARED_CCD"\
              -D"CCDDATA_STATIC_DATA" -D"DYNAMIC_ARRAYS"\
              -D"CCD_SYMBOLS" -D"NEW_ENTITY" -D"WIN32"\
              -D"ERR_TRACE_CCD"
   COPTSNF = $(COPTS) $(DEFINES) $(INCLUDES)
   INCLUDELIST = $(subst /I ,-I,$(INCLUDES))
   DEFINELIST = $(subst /D ,-D,$(DEFINES))
   COMMLFLAGS =  /nologo  #/subsystem:console  /machine:I386
   LFLAGS = $(COMMLFLAGS)
   LIBEXT = lib
   OBJTAIL = obj

endif       # platform: PC
endif       # target: nucleus OS

#----------------------------------- Special settings for each target 
#----------Win32
ifeq ($(TARGET), win32)
   LIBDIR=../LIB/WIN32$(DEBUGDIR)
   CCD_IMPORTLIB=$(LIBDIR)/ccd.lib

   CC=cl
   COPTS += /c /nologo /W3 /GX /Zp1

   ifeq ($(DEBUG), 1)
     COPTS += /MDd /Z7 
   else
     COPTS += /MD
   endif

   COPTS += /Fo./$(OBJDIR)/
   INCLUDES = -I"." -I"../inc" -I"../inc/vcms" -I"../inc/vcms/win32"
   DEFINES += -D"M_INTEL" -D"_TOOLS_" -D"CCDDATA_LOAD"\
            -D"WIN32" -D"TARGET_WIN32" -D"CCD_SYMBOLS" -D"CCD_MK"

   DEFINES += -D"SHARED_VSI" -D"SHARED_CCD"\
              -D"NEW_ENTITY" -D"DYNAMIC_ARRAYS" -D"ERR_TRACE_CCD"
   DEFINES += -D"ERR_TRC_STK_CCD" -D"DEBUG_CCD"

   COPTSNF = $(COPTS) $(DEFINES) $(INCLUDES)
   INCLUDELIST=$(INCLUDES)
   DEFINELIST=$(DEFINES)
   COMMLFLAGS += /nologo /subsystem:console /machine:I386

   LFLAGS = $(COMMLFLAGS)
   MKLIB = lib.exe /out:$@ $(LFLAGS)
   LIBEXT = lib
   OBJTAIL = obj
   CCD_LIB = $(LIBDIR)/ccd.$(LIBEXT)

endif         # target: win32

ifeq ($(OSENV), sus)
   COPTS += -c -o $(OBJDIR)/$@
   ifeq ($(DEBUG), 1)
     COPTS += -g
   endif
   ifeq ($(TRACE), 1)
        DEFINES += -DDEBUG_CCD -DERR_TRC_STK_CCD
   endif
   ifeq ($(MEMSUPER), 1)
        DEFINES += -DMEMORY_SUPERVISION
   endif

   INCLUDES = -I. -I../inc -I../inc/$(OSENV)
   DEFINES += -DSHARED_VSI -DSHARED_CCD\
              -DCCDDATA_STATIC_DATA -DDYNAMIC_ARRAYS\
              -DNEW_ENTITY \
              -DERR_TRACE_CCD
   ifeq ($(BYTESEX), motorola)
     DEFINES += -DM_MOTOROLA 
   else
     DEFINES += -DM_INTEL 
   endif
   ifeq ($(TARGET), rtlpc)
     COPTSNF = $(CFLAGS)
     MKLIB= i386-linux-ar ruv $@
     RANLIB= i386-linux-ranlib
     DEFINES += -D_RT_LINUX_ -DCCD_SYMBOLS 
   else
     ifeq ($(TARGET), linuxarm)
       CC=arm-linux-gcc
       MKLIB= arm-linux-ar ruv $@
       RANLIB= arm-linux-ranlib
       DEFINES += -DGSP_TARGET -DCCD_SYMBOLS 
     else
       ifeq ($(TARGET), solsparc)
         CC=gcc
         MKLIB= ar ruv $@
         RANLIB= ranlib
         DEFINES += -DCCD_SYMBOLS 
       else
         CC=gcc
         MKLIB= ar ruv $@
         RANLIB= ranlib
         DEFINES += -DCCD_SYMBOLS 
       endif
     endif
   endif
   COPTSNF += $(COPTS) $(DEFINES) $(INCLUDES)

   LIBEXT = a
   OBJTAIL = o
   CCD_LIB = $(LIBDIR)/libccd$(XXX).$(LIBEXT)
endif

#########################   Rules and targets   ##########################
.PHONY:	all clean

all: $(OBJDIR) $(CCD_LIB)

CCD_OBJS=$(patsubst %.$(OBJTAIL),$(OBJDIR)/%.$(OBJTAIL),$(_CCD_OBJS))
LNTFILES=$(patsubst %.$(OBJTAIL),%.lto,$(_CCD_OBJS))

objdir $(OBJDIR):
	@echo Creating object directory "$(OBJDIR)"
	$(MKDIR) -p $(OBJDIR)

$(_CCD_OBJS) : %.$(OBJTAIL) : $(CCD_SRC)/%.c
	$(CC) $(COPTSNF) $<

$(CCD_LIB) : $(_CCD_OBJS)  makefile $(CCD_DEF)
	$(MKLIB) $(CCD_OBJS)
ifeq ($(OSENV), sus)
	$(RANLIB) $@
endif

colibs:
	$(CHECKOUT) $(CO_LIBS)

cilibs:
	$(CHECKIN) $(CO_LIBS)

help:
	$(ECHO) usage...
	$(ECHO) building:
	$(ECHO) "gnumake TARGET={nuc|win32|vxworks|psos}\
	         [PLATFORM={arm7|arm|pc}] [CPU=PPC603] [DEBUG={1|0}]\
	         [TRACE={1|0}] [THUMB_MODE=1] [MEMSUPER={0|1} ..."
	$(ECHO) cleaning:
	$(ECHO) "gnumake clean TARGET={nuc|win32|vxworks|psos}\
	         [PLATFORM={arm7|arm|pc}] [CPU=PPC603] [DEBUG={1|0}]\
	         [TRACE={1|0}] [THUMB_MODE=1] [MEMSUPER={0|1} ..."

SRCFILES=$(patsubst %.$(OBJTAIL),%.c,$(_CCD_OBJS))
CCD_DEP=dep_ccd$(XXX).mk

clean:
	$(RM) $(CCD_OBJS) $(CCD_LIB)

depend: $(SRCFILES)
	@touch $(CCD_DEP)
	makedepend -b -f$(CCD_DEP) $^ -Y -o.$(OBJTAIL) $(INCLUDELIST)\
	    $(DEFINELIST)
	$(RM) $(CCD_DEP).bak

include ccd_lnt.mk
-include $(CCD_DEP)