view src/gpf2/inc/p_frame.h @ 629:3231dd9b38c1

armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 864b8cc0cf63
children
line wrap: on
line source

/* 
+------------------------------------------------------------------------------
|  File:       frm_primitives.h
+------------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for frame primitives.
+----------------------------------------------------------------------------- 
*/ 

#ifndef FRM_PRIMITIVES_H
#define FRM_PRIMITIVES_H

#define FRM_ERROR_IND     0xC000001E  /* SAP NR: 30 (0x1e), PRIM NR 0 */
#define FRM_WARNING_IND   0xC001001E  /* SAP NR: 30 (0x1e), PRIM NR 1 */

/* maximum length of a string in frame primitives */
#define FRM_PRIM_STR_SIZE   100

/* spontaneuous frame output */
typedef struct
{
  U32   error_code;
  char  error_string [ FRM_PRIM_STR_SIZE ];
} T_FRM_ERROR_IND;

typedef struct
{
  U32   warning_code;
  char  warning_string [ FRM_PRIM_STR_SIZE ];
} T_FRM_WARNING_IND;

#if 0
/* frame status requests and confirmations */

/* register destination for error/warning indications */

typedef struct
{
  char  name [ RESOURCE_NAMELEN ];
} T_FRM_REGISTER_REQ;

typedef struct
{
  char  name [ RESOURCE_NAMELEN ];
} T_FRM_REGISTER_CNF;

/* task status */

typedef struct
{
  U32   task_id;
} T_FRM_TASK_STATUS_REQ;

typedef struct
{
  char  name [ RESOURCE_NAMELEN ];
  U32   priority;
  U32   stacksize;
  U32   unused_stack;
} T_FRM_TASK_DATA;

typedef struct
{
  T_FRM_TASK_DATA   task [ MAX_OS_TASKS ];;
} T_FRM_TASK_STATUS_CNF;

/* partition status */

typedef struct
{
  U32   partition_group_id;
} T_FRM_PARTITION_STATUS_REQ;

typedef struct
{
  T_FRM_PARTITION_DATA p_pool [ MAX_POOL_GROUPS*MAX_POOLS_PER_GROUP ];
} T_FRM_PARTITION_STATUS_CNF;

typedef struct
{
  U32   partition_pool_id;
  U32   partition_size
  U32   available;
  U32   allocated;
} T_FRM_PARTITION_DATA;

/* memory status */
typedef struct
{
  U32   memory_pool_id;
} T_FRM_MEMORY_STATUS_REQ;

typedef struct
{
  U32   memory_pool_id;
  U32   pool_size
  U32   available;
  U32   allocated;
} T_FRM_MEMORY_DATA;

typedef struct
{
  T_FRM_MEMORY_DATA m_pool [ MAX_MEMORY_POOLS };
} T_FRM_MEMORY_STATUS_CNF;

/* timer status */

typedef struct
{
  U32   timer_id;
} T_FRM_TIMER_STATUS_REQ;

typedef struct
{
  U32   max_timer;
  U32   max_simul_available_timer;
  U32   max_simul_running_timer;
} T_FRM_TIMER_STATUS_CNF;

/* semaphore status */

typedef struct
{
  U32   semaphore_id;
} T_FRM_SEMAPHORE_STATUS_REQ;

typedef struct
{
} T_FRM_SEMAPHORE_STATUS_CNF;
#endif

#endif /* FRM_PRIMITIVES_H */