view src/gpf2/inc/pco_inifile.h @ 629:3231dd9b38c1

armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 864b8cc0cf63
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  PCO2
|  Modul   :  inc\pco_inifile.h
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Contains declarations of the class IniFile. (Based on 
|             File from Adam Clauss)
+----------------------------------------------------------------------------- 
*/ 

#ifndef _PCO_INIFILE_H_
#define _PCO_INIFILE_H_

/*==== INCLUDES ===================================================*/

#pragma warning (disable: 4786) /* ignore warning about to long template names */

#include <iostream>
#include <string>
#include <vector>
#include "cms.h"

using namespace std;

/*==== PROTOTYPES ==================================================*/

//all Keys are of this type
struct Key
{
	//list of values in key
	vector<string> values; 

	//corresponding list of value names
	vector<string> names;

  //corresponding list of modified state
  vector<bool> modified; 
};

class IniFile  
{
	//all private variables
private:

	//stores pathname of ini file to read/write
	string path;
	
	//list of Keys in ini
	vector<Key> keys; 

	//corresponding list of Keynames
	vector<string> names; 

  // semaphore to protect file reading/writing
  CMS_HANDLE m_file_sema;
	
	//all private functions
private:
	//overloaded to take string
	istream & getline( istream & is, string & str );

	//returns index of specified value, in the specified Key, or -1 if not found
	int FindValue(int Keynum, string valuename) const;

	//returns index of specified Key, or -1 if not found
	int FindKey(string Keyname) const;


	//public variables
public:

	//will contain error info if one occurs
	//ended up not using much, just in ReadFile and GetValue
	mutable string error;
  
	//will contain warning info if one occurs
	//ended up not using much, just in ReadFile 
  mutable string warning;

	//public functions
public:
	//default constructor
	IniFile();

	//constructor, can specify pathname here instead of using SetPath later
	IniFile(string inipath);

	//default destructor
	virtual ~IniFile();

	//sets path of ini file to read and write from
	void SetPath(string newpath);

	//returns path of currently selected ini file
  const char* GetPath() const { return path.c_str();}

	//reads ini file specified using IniFile::SetPath()
	//returns true if successful, false otherwise
  //may contain warnings in warning-variable
	bool ReadFile(bool refresh=false);

	//writes data stored in class to ini file
	bool WriteFile(bool refresh_first=true); 

	//deletes all stored ini data
	void Reset();

	//returns number of Keys currently in the ini
	int GetNumKeys() const;

	//returns number of values stored for specified Key
	int GetNumValues(string Keyname) const;

	//gets value of [Keyname] valuename = 
	//overloaded to return string, int, and double,
	//returns "", or 0 if Key/value not found.  Sets error member to show problem
	string GetValue(string Keyname, string valuename) const; 
	int GetValueI(string Keyname, string valuename) const; 
	double GetValueF(string Keyname, string valuename) const;

	//sets value of [Keyname] valuename =.
	//specify the optional paramter as false (0) if you do not want it to create
	//the Key if it doesn't exist. Returns true if data entered, false otherwise
	//overloaded to accept string, int, and double
	bool SetValue(string Key, string valuename, string value, bool create = 1);
	bool SetValueI(string Key, string valuename, int value, bool create = 1);
	bool SetValueF(string Key, string valuename, double value, bool create = 1);

  bool modified(string keyname, string valuename);
  bool set_modified(string keyname, string valuename, bool modified=true);

	//deletes specified value
	//returns true if value existed and deleted, false otherwise
	bool DeleteValue(string Keyname, string valuename);

	//deletes specified Key and all values contained within
	//returns true if Key existed and deleted, false otherwise
	bool DeleteKey(string Keyname);
};

#endif /* _PCO_INIFILE_H_ */