FreeCalypso > hg > fc-magnetite
view src/ui3/bmi/mmiSimToolkit.h @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 02 Jan 2020 05:38:26 +0000 |
| parents | 6a4d9f47793e |
| children |
line wrap: on
line source
/******************************************************************************* CONDAT (UK) ******************************************************************************** This software product is the property of Condat (UK) Ltd and may not be disclosed to any third party without the express permission of the owner. ******************************************************************************** $Project name: Basic MMI $Project code: BMI (6349) $Module: MMI $File: MmiSimToolkit.h $Revision: 1.0 $Author: Condat(UK) $Date: 25/10/00 ******************************************************************************** Description: This provides the root mofule for the basic MMI ******************************************************************************** $History: MmiSimToolkit.h Nov 17, 2006 REF:DR:OMAPS00104580 x0039928 Description: CT GCF - TC27.22.4.13.1 Seq 1.10 - PROACTIVE SIM COMMANDS: SET UP CALL (NORMAL) - Call Set-up Failed Solution: Removed the Redial flag enabling code. 25/10/00 Original Condat(UK) BMI version. Nov 07, 2006 ER:OMAPS00070661 R.Prabakar(a0393213) R99 network compliancy : Implemented Language Notification and Provide Local Information (Language setting) SAT proactive commands and Language Selection SAT event $End *******************************************************************************/ #ifndef _DEF_MMI_SAT_H_ #define _DEF_MMI_SAT_H_ #include "mfw_mfw.h" /* * External Interfaces */ USHORT sim_toolkit_check (struct MfwMnuTag *m, struct MfwMnuAttrTag *ma, struct MfwMnuItemTag *mi); extern void simToolkitInit(T_MFW_HND parentWindow); extern void simToolkitExit(void); void sat_add_unicode_tag_if_needed(char* string); /*SPR 1257, added new function for unicode handling*/ /* Nov 17, 2006 REF:DR:OMAPS00104580 x0039928 -Deleted Redial flag enabling/disabling code*/ // ADDED - RAVI - 25-11-2005 void sat_release_the_editor (void); // END - RAVI #ifdef FF_MMI_R99_SAT_LANG /*OMAPS00070661 a0393213(R.Prabakar) */ /*ADD ALL QUALIFIERS HERE*/ #define LOCAL_INFO_LANG_SETTING_QUALIFIER 4 #define LANG_NOTIFY_NON_SPEC_LANG_QUALIFIER 0 #define LANG_NOTIFY_SPEC_LANG_QUALIFIER 1 /*ASCII VALUES FOR LANGUAGES*/ #define ASCII_FOR_D 0x64 #define ASCII_FOR_E 0x65 #define ASCII_FOR_H 0x68 #define ASCII_FOR_N 0x6E #define ASCII_FOR_Z 0x7A #endif /*FF_MMI_R99_SAT_LANG*/ #endif /* _DEF_MMI_SAT_H_ */