view src/cs/drivers/drv_core/timer/timer1.c @ 701:35e7f9d0379f

targets: add TARGET_HAS_BUZZER to c11x, c139 and dsample This new target config preprocessor symbol was introduced in Tourmaline in connection with the new approach to playing buzzer melodies via PWT, properly omitting the responsible code on targets where BU output controls the vibrator instead. That code is not present in Magnetite and we have no plans to backport it here, but target header files should be kept consistent between the two trees, especially given that we plan to support FC Venus target in Magnetite.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 26 Mar 2022 19:51:34 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/******************************************************************************
            TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION           
                                                                             
   Property of Texas Instruments -- For  Unrestricted  Internal  Use  Only 
   Unauthorized reproduction and/or distribution is strictly prohibited.  This 
   product  is  protected  under  copyright  law  and  trade  secret law as an 
   unpublished work.  Created 1987, (C) Copyright 1997 Texas Instruments.  All 
   rights reserved.                                                            
                  
                                                           
   Filename       	: timer1.c

   Description    	: Set of useful functions for TIMER module test cases 

   Project        	: drivers

   Author         	: pmonteil@tif.ti.com  Patrice Monteil.

   Version number	: 1.4

   Date and time	: 08/18/00 14:42:35

   Previous delta 	: 06/30/00 11:40:43

   SCCS file      	: /db/gsm_asp/db_ht96/dsp_0/gsw/rel_0/mcu_l1/release_gprs/RELEASE_GPRS/drivers1/common/SCCS/s.timer1.c

   Sccs Id  (SID)       : '@(#) timer1.c 1.4 08/18/00 14:42:35 '

 
*****************************************************************************/

#include "l1sw.cfg"  

#if (OP_L1_STANDALONE == 0)
  #include "main/sys_types.h"
#else
  #include "sys_types.h"
#endif
#include "memif/mem.h" 
#include "timer1.h" 

/*--------------------------------------------------------------*/
/*  Dtimer1_Get_cntlreg()					*/
/*--------------------------------------------------------------*/
/* Parameters : none						*/
/* Return     :	none						*/
/* Functionality : read one of the TIMER register		*/
/*--------------------------------------------------------------*/

 SYS_UWORD16 Dtimer1_Get_cntlreg(void)
 {
 volatile SYS_UWORD16 timerReg;

      timerReg = (( * (SYS_UWORD16 *) D_TIMER_CNTL) & D_TIMER_CNTL_MASK);
   return(timerReg);
}


/*--------------------------------------------------------------*/
/*  Dtimer_Init_cntl()						*/
/*--------------------------------------------------------------*/
/* Parameters :start/stop,reload yes/no,pre scale,ext clk on/off*/
/* Return     :	none						*/
/* Functionality : initialize the timer start, autoreload, Ptv 	*/
/*		   and clock enable				*/
/*--------------------------------------------------------------*/

void Dtimer1_Init_cntl (SYS_UWORD16 St, SYS_UWORD16 Reload, SYS_UWORD16 clockScale, SYS_UWORD16 clkon)
{
    SYS_UWORD16 cntl = * (SYS_UWORD16 *) D_TIMER_CNTL; 


    cntl &= ~(D_TIMER_ST | D_TIMER_PTV);    	/* stop and reset values */

    (Reload) ? (cntl |= D_TIMER_AR) : (cntl &= ~D_TIMER_AR);

    cntl |= (clockScale << 2 );

    cntl |= ( clkon << 5 );


    * (SYS_UWORD16 *) D_TIMER_LOAD = St;

    * (SYS_UWORD16 *) D_TIMER_CNTL = cntl;
    }

/*--------------------------------------------------------------*/
/*  Dtimer1_AR()						*/
/*--------------------------------------------------------------*/
/* Parameters :start/stop,reload yes/no,pre scale,ext clk on/off*/
/* Return     :	none						*/
/* Functionality : set the AR bit Ar = 0 | 1			*/
/*--------------------------------------------------------------*/

void Dtimer1_AR(SYS_UWORD16 Ar)
{
SYS_UWORD16 cntl = * (SYS_UWORD16 *) D_TIMER_CNTL; 

 cntl &= ~(D_TIMER_ST);			/* stop the timer */

 cntl &= ~(D_TIMER_AR);

 cntl |= ( Ar << 1 );

 * (SYS_UWORD16 *) D_TIMER_CNTL = cntl;
}

/*--------------------------------------------------------------*/
/*  Dtimer1_PTV()						*/
/*--------------------------------------------------------------*/
/* Parameters : pre scale					*/
/* Return     :	none						*/
/* Functionality : set the Ptv bits Ptv = 0 => 7 		*/
/*--------------------------------------------------------------*/

void Dtimer1_PTV(SYS_UWORD16 Ptv)
{
SYS_UWORD16 cntl = * (SYS_UWORD16 *) D_TIMER_CNTL;	
 
 cntl &= ~(D_TIMER_ST);			/* stop the timer */

 cntl &= ~(D_TIMER_PTV);		/* Ptv[4:0] set to 0 */

 cntl |= ( Ptv << 2 );

 * (SYS_UWORD16 *) D_TIMER_CNTL = cntl;
}

/*--------------------------------------------------------------*/
/*     Dtimer1_Clken()						*/
/*--------------------------------------------------------------*/
/* Parameters : ext clk on/off					*/
/* Return     :	none						*/
/* Functionality :  set the clock_enable bit En = 0 | 1 	*/
/*--------------------------------------------------------------*/

void Dtimer1_Clken(SYS_UWORD16 En)
{
SYS_UWORD16 cntl = * (SYS_UWORD16 *) D_TIMER_CNTL;
 
 cntl &= ( ~D_TIMER_CLK_EN);

 cntl |= ( En << 5 );

 * (SYS_UWORD16 *) D_TIMER_CNTL = cntl;
}



/*--------------------------------------------------------------*/
/*  Dtimer_Start()						*/
/*--------------------------------------------------------------*/
/* Parameters : on/off						*/
/* Return     :	none						*/
/* Functionality :  Start or stop the timer 			*/
/*--------------------------------------------------------------*/

void  Dtimer1_Start (SYS_UWORD16 startStop)
{
    (startStop == D_TIMER_ST) ? 	
	((* (SYS_UWORD16 *) D_TIMER_CNTL) |=  D_TIMER_ST) :	/* condition vrai */
 	((* (SYS_UWORD16 *) D_TIMER_CNTL) &= ~D_TIMER_ST);    	/* condition fausse */
}

/*--------------------------------------------------------------*/
/*  Dtimer_ReadValue()						*/
/*--------------------------------------------------------------*/
/* Parameters : on/off						*/
/* Return     :	none						*/
/* Functionality :  Read timer value				*/
/*--------------------------------------------------------------*/
SYS_UWORD16 Dtimer1_ReadValue (void)
{
 return(* (SYS_UWORD16 *) D_TIMER_READ);
 
}

/*--------------------------------------------------------------*/
/* Parameters : on/off						*/
/* Return     :	none						*/
/* Functionality :  Write timer value				*/
/*--------------------------------------------------------------*/
void Dtimer1_WriteValue (SYS_UWORD16 value)
{
 (* (SYS_UWORD16 *) D_TIMER_LOAD) = value;
 
}