line source
+ − /*
+ − +--------------------------------------------------------------------------+
+ − | PROJECT : PROTOCOL STACK |
+ − | FILE : m_rr.val |
+ − | SOURCE : "__out__\g23m_dfile\msg\rr.mdf" |
+ − | LastModified : "2002-12-19" |
+ − | IdAndVersion : "6147.604.97.114" |
+ − | SrcFileTime : "Wed Aug 24 12:48:50 2005" |
+ − | Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:14 2007 |
+ − | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! |
+ − +--------------------------------------------------------------------------+
+ − */
+ −
+ − /* PRAGMAS
+ − * PREFIX : NONE
+ − * COMPATIBILITY_DEFINES : NO (require PREFIX)
+ − * ALWAYS_ENUM_IN_VAL_FILE: NO
+ − * ENABLE_GROUP: NO
+ − * CAPITALIZE_TYPENAME: NO
+ − */
+ −
+ −
+ − #ifndef M_RR_VAL
+ − #define M_RR_VAL
+ −
+ −
+ − #define CDG_ENTER__M_RR_VAL
+ −
+ − #define CDG_ENTER__FILENAME _M_RR_VAL
+ − #define CDG_ENTER__M_RR_VAL__FILE_TYPE CDGINC
+ − #define CDG_ENTER__M_RR_VAL__LAST_MODIFIED _2002_12_19
+ − #define CDG_ENTER__M_RR_VAL__ID_AND_VERSION _6147_604_97_114
+ −
+ − #define CDG_ENTER__M_RR_VAL__SRC_FILE_TIME _Wed_Aug_24_12_48_50_2005
+ −
+ − #include "CDG_ENTER.h"
+ −
+ − #undef CDG_ENTER__M_RR_VAL
+ −
+ − #undef CDG_ENTER__FILENAME
+ −
+ − #include "m_rr_com.val" /* Access values independent from the corresponding h-file. */
+ −
+ −
+ − /*
+ − * Value constants for VAL_ab_type
+ − */
+ − #define AB_8_BIT (0x0) /* 8 bit access burst shall be used */
+ − #define AB_11_BIT (0x1) /* 11 bit access burst shall be used */
+ −
+ − /*
+ − * Value constants for VAL_atc
+ − */
+ − #define ATC_HANDOV_MAN (0x0) /* Sending of Handover access is mandatory */
+ − #define ATC_HANDOV_OPT (0x1) /* Sending of Handover access is optional */
+ −
+ − /*
+ − * Value constants for VAL_af
+ − */
+ − #define AF_NO (0x0) /* acknowledgement is not required */
+ − #define AF_YES (0x1) /* acknowledgement is required */
+ −
+ − /*
+ − * Value constants for VAL_acs
+ − */
+ − #define ACS_USE_SI4 (0x0) /* The SI 4 rest octets, if present, shall be used to derive the value of PI and possibly C2 parameters and/or other parameters */
+ − #define ACS_USE_SI7 (0x1) /* The value of PI and possibly C2 parameters and/or other parameters in a System information type 7 or type 8 message shall be used */
+ −
+ − /*
+ − * Value constants for VAL_algo_ident
+ − */
+ − #define VAL_ALGO_IDENT___DEF (0x0) /* reserved */
+ − #define ALGO_A5_1 (0x0) /* cipher with algorithm A5/1 */
+ − #define ALGO_A5_2 (0x1) /* cipher with algorithm A5/2 */
+ − #define ALGO_A5_3 (0x2) /* cipher with algorithm A5/3 */
+ − #define ALGO_A5_4 (0x3) /* cipher with algorithm A5/4 */
+ − #define ALGO_A5_5 (0x4) /* cipher with algorithm A5/5 */
+ − #define ALGO_A5_6 (0x5) /* cipher with algorithm A5/6 */
+ − #define ALGO_A5_7 (0x6) /* cipher with algorithm A5/7 */
+ −
+ − /*
+ − * Value constants for VAL_alpha
+ − */
+ − #define VAL_ALPHA___DEF (0x0) /* Reserved */
+ −
+ − /*
+ − * Value constants for VAL_att
+ − */
+ − #define CCD_ATT_NO (0x0) /* MSs are not allowed to apply IMSI attach and detach procedure. */
+ − #define CCD_ATT_YES (0x1) /* MSs in the cell shall apply IMSI attach and detach procedure. */
+ −
+ − /*
+ − * Value constants for VAL_bcch_type
+ − */
+ − #define BCCH_NORM (0x0) /* on BCCH Norm */
+ − #define BCCH_EXT (0x1) /* on BCCH Ext. */
+ −
+ − /*
+ − * Value constants for VAL_blp
+ − */
+ − #define BLP_BLK (0x0) /* The allocation bitmap is to be interpreted as blocks. */
+ − #define BLP_PER (0x1) /* The allocation bitmap is to be interpreted as block periods. */
+ −
+ − /*
+ − * Value constants for VAL_pwr_ctrl_mode
+ − */
+ − #define PWR_CTR_A (0x0) /* mode A */
+ − #define PWR_CTR_B (0x1) /* mode B */
+ −
+ − /*
+ − * Value constants for VAL_call_prio
+ − */
+ − #define CALL_PRIO_NO (0x0) /* no priority applied */
+ − #define CALL_PRIO_LEV_4 (0x1) /* call priority level 4 */
+ − #define CALL_PRIO_LEV_3 (0x2) /* call priority level 3 */
+ − #define CALL_PRIO_LEV_2 (0x3) /* call priority level 2 */
+ − #define CALL_PRIO_LEV_1 (0x4) /* call priority level 1 */
+ − #define CALL_PRIO_LEV_0 (0x5) /* call priority level 0 */
+ − #define CALL_PRIO_LEV_A (0x6) /* call priority level A */
+ − #define CALL_PRIO_LEV_B (0x7) /* call priority level B */
+ −
+ − /*
+ − * Value constants for VAL_re
+ − */
+ − #define REESTAB_YES (0x0) /* Call Reestablishment allowed in the cell */
+ − #define REESTAB_NO (0x1) /* Call Reestablishment not allowed in the cell */
+ −
+ − /*
+ − * Value constants for VAL_cell_bar_qual
+ − */
+ − #define CBQ_NO (0x0) /* cell selection and reselection depending on cell bar access */
+ − #define CBQ_YES (0x1) /* cell selection priority always low, reselection always normal */
+ −
+ − /*
+ − * Value constants for VAL_cell_bar_access
+ − */
+ − #define BARRED_NO (0x0) /* The cell is not barred */
+ − #define BARRED_YES (0x1) /* The cell is barred */
+ −
+ − /*
+ − * Value constants for VAL_cell_resel_hyst
+ − */
+ − #define CELL_HYST_0_DB (0x0) /* 0 dB RXLEV hysteresis for LA re-selection */
+ − #define CELL_HYST_2_DB (0x1) /* 2 dB RXLEV hysteresis for LA re-selection */
+ − #define CELL_HYST_4_DB (0x2) /* 4 dB RXLEV hysteresis for LA re-selection */
+ − #define CELL_HYST_6_DB (0x3) /* 6 dB RXLEV hysteresis for LA re-selection */
+ − #define CELL_HYST_8_DB (0x4) /* 8 dB RXLEV hysteresis for LA re-selection */
+ − #define CELL_HYST_10_DB (0x5) /* 10 dB RXLEV hysteresis for LA re-selection */
+ − #define CELL_HYST_12_DB (0x6) /* 12 dB RXLEV hysteresis for LA re-selection */
+ − #define CELL_HYST_14_DB (0x7) /* 14 dB RXLEV hysteresis for LA re-selection */
+ −
+ − /*
+ − * Value constants for VAL_chan_type
+ − */
+ − #define VAL_CHAN_TYPE___DEF (0x0) /* channel not defined */
+ − #define TCH_F (0x1) /* TCH/F + ACCHs */
+ − #define TCH_H_S0 (0x2) /* TCH/H + ACCHs, subchannel 0 */
+ − #define TCH_H_S1 (0x3) /* TCH/H + ACCHs, subchannel 1 */
+ − #define SDCCH_4_S0 (0x4) /* SDCCH/4 + SDCCH/C4, subchannel 0 */
+ − #define SDCCH_4_S1 (0x5) /* SDCCH/4 + SDCCH/C4, subchannel 1 */
+ − #define SDCCH_4_S2 (0x6) /* SDCCH/4 + SDCCH/C4, subchannel 2 or CBCH (SDCCH/4) */
+ − #define SDCCH_4_S3 (0x7) /* SDCCH/4 + SDCCH/C4, subchannel 3 */
+ − #define SDCCH_8_S0 (0x8) /* SDCCH/8 + SDCCH/C8, subchannel 0 */
+ − #define SDCCH_8_S1 (0x9) /* SDCCH/8 + SDCCH/C8, subchannel 1 */
+ − #define SDCCH_8_S2 (0xa) /* SDCCH/8 + SDCCH/C8, subchannel 2 or CBCH (SDCCH/8) */
+ − #define SDCCH_8_S3 (0xb) /* SDCCH/8 + SDCCH/C8, subchannel 3 */
+ − #define SDCCH_8_S4 (0xc) /* SDCCH/8 + SDCCH/C8, subchannel 4 */
+ − #define SDCCH_8_S5 (0xd) /* SDCCH/8 + SDCCH/C8, subchannel 5 */
+ − #define SDCCH_8_S6 (0xe) /* SDCCH/8 + SDCCH/C8, subchannel 6 */
+ − #define SDCCH_8_S7 (0xf) /* SDCCH/8 + SDCCH/C8, subchannel 7 */
+ − #define TCH_F_NO_ADD (0x10) /* TCH/F + FACCH/F + SACCH/M, no additional timeslots */
+ − #define TCH_F_ADD_BI1 (0x11) /* TCH/F+ACCHs, additional bidirectional TCH/F/SACCH/M on timeslot n-1 */
+ − #define TCH_F_ADD_BI2 (0x12) /* TCH/F+ACCHs, additional bidirectional TCH/F/SACCH/M on timeslot n+1, n-1 */
+ − #define TCH_F_ADD_BI3 (0x13) /* TCH/F+ACCHs, additional bidirectional TCH/F/SACCH/M on timeslot n+1, n-1, n-2 */
+ − #define TCH_F_ADD_BI4 (0x14) /* TCH/F+ACCHs, additional bidirectional TCH/F/SACCH/M on timeslot n+1, n-1 until n-3 */
+ − #define TCH_F_ADD_BI5 (0x15) /* TCH/F+ACCHs, additional bidirectional TCH/F/SACCH/M on timeslot n+1, n-1 until n-4 */
+ − #define TCH_F_ADD_BI6 (0x16) /* TCH/F+ACCHs, additional bidirectional TCH/F/SACCH/M on timeslot n+1, n-1 until n-5 */
+ − #define TCH_F_ADD_BI7 (0x17) /* TCH/F+ACCHs, additional bidirectional TCH/F/SACCH/M on timeslot n+1, n-1 until n-6 */
+ − #define TCH_F_ADD_UNI1 (0x18) /* TCH/F+ACCHs, additional unidirectional TCH/FD/SACCH/MD on timeslot n-1 */
+ − #define TCH_F_ADD_UNI2 (0x19) /* TCH/F+ACCHs, additional unidirectional TCH/FD/SACCH/MD on timeslot n+1, n-1 */
+ − #define TCH_F_ADD_UNI3 (0x1a) /* TCH/F+ACCHs, additional unidirectional TCH/FD/SACCH/MD on timeslot n+1, n-1 , n-2 */
+ − #define TCH_F_ADD_BI_UNI (0x1e) /* TCH/F+ACCHs, additional bidirectional TCH/F/SACCH/M and unidirectional TCH/FD/SACCH/MD on timeslot n+1, n-1 */
+ −
+ − /*
+ − * Value constants for VAL_cn1
+ − */
+ − #define CN_ANY_CHAN (0x0) /* Any channel. */
+ − #define CN_SDCCH (0x1) /* SDCCH. */
+ − #define CN_TCH_F (0x2) /* TCH/F (Full rate). */
+ − #define CN_TCH (0x3) /* TCH/H or TCH/F (Dual rate). */
+ −
+ − /*
+ − * Value constants for VAL_chan_mode
+ − */
+ − #define VAL_CHAN_MODE___DEF (0x0) /* reserved mode */
+ − #define CM_SIG_ONLY (0x0) /* signaling only */
+ − #define CM_SPEECH (0x1) /* speech (full rate or half rate), version 1 */
+ − #define CM_SPEECH_VER1 (0x1) /* speech (full rate or half rate), version 1 */
+ − #define CM_SPEECH_VER2 (0x21) /* speech (full rate or half rate), version 2 */
+ − #define CM_SPEECH_VER3 (0x41) /* speech (full rate or half rate), version 3 */
+ − #define CM_DATA_14_5 (0xf) /* data, 14.5 kbit/s radio interface rate */
+ − #define CM_DATA_12_0 (0x3) /* data, 12.0 kbit/s radio interface rate */
+ − #define CM_DATA_6_0 (0xb) /* data, 6.0 kbit/s radio interface rate */
+ − #define CM_DATA_3_6 (0x13) /* data, 3.6 kbit/s radio interface rate */
+ −
+ − /*
+ − * Value constants for VAL_chan_mode_2
+ − */
+ − #define VAL_CHAN_MODE_2___DEF (0x0) /* reserved mode */
+ − #define CM2_SIG_ONLY (0x0) /* signaling only */
+ − #define CM2_SPEECH_HALF (0x5) /* speech half rate */
+ − #define CM2_SPEECH_VER1 (0x5) /* speech (full rate or half rate), version 1 */
+ − #define CM2_SPEECH_VER2 (0x25) /* speech (full rate or half rate), version 2 */
+ − #define CM2_SPEECH_VER3 (0x45) /* speech (full rate or half rate), version 3 */
+ − #define CM2_DATA_6_0 (0xf) /* data, 6.0 kbit/s radio interface rate */
+ − #define CM2_DATA_3_6 (0x17) /* data, 3.6 kbit/s radio interface rate */
+ −
+ − /*
+ − * Value constants for VAL_crd_prio
+ − */
+ − #define CRD_PRIO_1 (0x0) /* priority level 1 (highest priority) */
+ − #define CRD_PRIO_2 (0x1) /* priority level 2 */
+ − #define CRD_PRIO_3 (0x2) /* priority level 3 */
+ − #define CRD_PRIO_4 (0x3) /* priority level 4 (lowest priority) */
+ −
+ − /*
+ − * Value constants for VAL_cr
+ − */
+ − #define INC_IMEISV_NO (0x0) /* IMEISV shall not be included */
+ − #define INC_IMEISV_YES (0x1) /* IMEISV shall be included */
+ −
+ − /*
+ − * Value constants for VAL_cod_scheme
+ − */
+ − #define COD_S_1 (0x0)
+ − #define COD_S_2 (0x1)
+ − #define COD_S_3 (0x2)
+ − #define COD_S_4 (0x3)
+ −
+ − /*
+ − * Value constants for VAL_c_r
+ − */
+ − #define CMD_FRESP (0x0) /* Command or Final Response */
+ − #define NCMD_FRESP (0x1) /* Not Command or Final Response */
+ −
+ − /*
+ − * Value constants for VAL_ccch_conf
+ − */
+ − #define VAL_CCCH_CONF___DEF (0x0) /* reserved */
+ − #define CCD_CCCH_1_NOT_COMB (0x0) /* 1 basic channel used for CCCH, not combined with SDCCHs */
+ − #define CCD_CCCH_1_COMB (0x1) /* 1 basic channel used for CCCH, combined with SDCCHs */
+ − #define CCD_CCCH_2_NOT_COMB (0x2) /* 2 basic channel used for CCCH, not combined with SDCCHs */
+ − #define CCD_CCCH_3_NOT_COMB (0x4) /* 3 basic channel used for CCCH, not combined with SDCCHs */
+ − #define CCD_CCCH_4_NOT_COMB (0x6) /* 4 basic channel used for CCCH, not combined with SDCCHs */
+ −
+ − /*
+ − * Value constants for VAL_ctrl_ack_type
+ − */
+ − #define VAL_CTRL_ACK_TYPE___0 (0x0) /* default format is four access bursts */
+ − #define VAL_CTRL_ACK_TYPE___1 (0x1) /* default format is RLC/MAC control block. */
+ −
+ − /*
+ − * Value constants for VAL_d_t
+ − */
+ − #define D_T_DED (0x0) /* the message assigns a resource in dedicated mode */
+ − #define D_T_TBF (0x1) /* the message assigns a TBF */
+ −
+ − /*
+ − * Value constants for VAL_dtx_b
+ − */
+ − #define VAL_DTX_B___DEF (0x0) /* invalid DTX indicator */
+ − #define B_DTX_MAY_USE (0x0) /* The MSs may use uplink DTX */
+ − #define B_DTX_SHALL_USE (0x1) /* The MSs shall use uplink DTX */
+ − #define B_DTX_DONT_USE (0x2) /* The MS shall not use uplink DTX */
+ −
+ − /*
+ − * Value constants for VAL_dtx_s
+ − */
+ − #define S_DTX_F_MAYUSE_H_DONTUSE (0x0) /* May use DTX on TCH-F. Don't use DTX on TCH-H. */
+ − #define S_DTX_F_USE_H_DONTUSE (0x1) /* Do use DTX on TCH-F. Don't use DTX on TCH-H. */
+ − #define S_DTX_F_DONTUSE_H_DONTUSE (0x2) /* Don't use DTX on TCH-F. Don't use DTX on TCH-H. */
+ − #define S_DTX_F_USE_H_MAYUSE (0x3) /* Do use DTX on TCH-F. May use DTX on TCH-H. */
+ − #define S_DTX_F_MAYUSE_H_MAYUSE (0x4) /* May use DTX on TCH-F. May use DTX on TCH-H. */
+ − #define S_DTX_F_USE_H_USE (0x5) /* Do use DTX on TCH-F. Do use DTX on TCH-H. */
+ − #define S_DTX_F_DONTUSE_H_USE (0x6) /* Don't use DTX on TCH-F. Do use DTX on TCH-H. */
+ − #define S_DTX_F_MAYUSE_H_USE (0x7) /* May use DTX on TCH-F. Do use DTX on TCH-H. */
+ −
+ − /*
+ − * Value constants for VAL_dtx_used
+ − */
+ − #define DTX_USED_NO (0x0) /* DTX was not used */
+ − #define DTX_USED_YES (0x1) /* DTX was used */
+ −
+ − /*
+ − * Value constants for VAL_dl
+ − */
+ − #define DL_0 (0x0) /* no meaning */
+ − #define DL_1 (0x1) /* the message assigns a resource to the MS identified by the IA rest octets */
+ −
+ − /*
+ − * Value constants for VAL_ext_dyn_all
+ − */
+ − #define EXT_DYN_NO (0x0) /* Dynamic Allocation */
+ − #define EXT_DYN_YES (0x1) /* Extended Dynamic Allocation */
+ −
+ − /*
+ − * Value constants for VAL_final
+ − */
+ − #define FINAL_NO (0x0) /* allocation is not the last Allocation of TBF */
+ − #define FINAL_YES (0x1) /* allocation is the last Allocation of TBF */
+ −
+ − /*
+ − * Value constants for VAL_f_seg
+ − */
+ − #define F_SEG (0x0) /* First or only segment */
+ − #define NF_SEG (0x1) /* Not first or only segment */
+ −
+ − /*
+ − * Value constants for VAL_flag
+ − */
+ − #define PRES_NO (0x0) /* information is not present */
+ − #define PRES_YES (0x1) /* information is present */
+ −
+ − /*
+ − * Value constants for VAL_hdm
+ − */
+ − #define HDM_NO (0x0) /* The mobile station shall not operate in half duplex mode. */
+ − #define HDM_YES (0x1) /* The mobile station shall operate in half duplex mode. */
+ −
+ − /*
+ − * Value constants for VAL_hop
+ − */
+ − #define HOP_NO (0x0) /* frequency hopping is off */
+ − #define HOP_YES (0x1) /* frequency hopping is on */
+ −
+ − /*
+ − * Value constants for VAL_inband_not
+ − */
+ − #define IN_BAND_NOT_NCH (0x0) /* notifications are sent on NCH only */
+ − #define IN_BAND_NOT_FACCH (0x1) /* notifications are sent on FACCH too */
+ −
+ − /*
+ − * Value constants for VAL_inband_pag
+ − */
+ − #define IN_BAND_PAG_PCH (0x0) /* pagings are sent on PCH only */
+ − #define IN_BAND_PAG_FACCH (0x1) /* pagings are sent on FACCH too */
+ −
+ − /*
+ − * Value constants for VAL_indir
+ − */
+ − #define INDIR_NO (0x0) /* non hopping configuration */
+ − #define INDIR_YES (0x1) /* indirect encoding of hopping RF channel configuration */
+ −
+ − /*
+ − * Value constants for VAL_it5
+ − */
+ − #define IT5_1 (0x0) /* System Information Type 1 */
+ − #define IT5_2 (0x1) /* System Information Type 2 */
+ − #define IT5_2BIS (0x2) /* System Information Type 2bis */
+ − #define IT5_2TER (0x3) /* System Information Type 2ter */
+ − #define IT5_3 (0x4) /* System Information Type 3 */
+ − #define IT5_4 (0x5) /* System Information Type 4 */
+ − #define IT5_7 (0x6) /* System Information Type 7 */
+ − #define IT5_8 (0x7) /* System Information Type 8 */
+ − #define IT5_9 (0x8) /* System Information Type 9 */
+ − #define IT5_13 (0x9) /* System Information Type 13 */
+ − #define IT5_14 (0xa) /* System Information Type 14 */
+ −
+ − /*
+ − * Value constants for VAL_icmi
+ − */
+ − #define ICMI_IMPL (0x0) /* initial codec mode defined by implicit rule provided in GSM 05.09 */
+ − #define ICMI_START_MODE (0x1) /* initial codec mode defined by start mode field */
+ −
+ − /*
+ − * Value constants for VAL_key_seq
+ − */
+ − #define VAL_KEY_SEQ___7 (0x7) /* No key is available (MS to network); Reserved (network to MS) */
+ −
+ − /*
+ − * Value constants for VAL_l_seg
+ − */
+ − #define L_SEG (0x0) /* Last or only segment */
+ − #define NL_SEG (0x1) /* Not last or only segment */
+ −
+ − /*
+ − * Value constants for VAL_llc_fr_type
+ − */
+ − #define LLC_IS_ACK (0x0) /* LLC frame is SACK or NACK */
+ − #define LLC_NOT_ACK (0x1) /* LLC frame is not SACK or NACK */
+ −
+ − /*
+ − * Value constants for VAL_low_arfcn
+ − */
+ − #define VAL_LOW_ARFCN___DEF (0x0) /* reserved */
+ −
+ − /*
+ − * Value constants for VAL_mac_mode
+ − */
+ − #define MAC_DYN_ALLOC (0x0) /* dynamic allocation */
+ − #define MAC_EXT_DYN_ALLOC (0x1) /* extended dynamic allocation */
+ − #define MAC_FIX_ALLOC_NOT_HALF (0x2) /* fixed allocation, not half duplex mode */
+ − #define MAC_FIX_ALLOC (0x3) /* fixed allocation, half duplex mode */
+ −
+ − /*
+ − * Value constants for VAL_ma_num
+ − */
+ − #define MA_NUM_14 (0x0) /* MA_NUMBER = 14 */
+ − #define MA_NUM_15 (0x1) /* MA_NUMBER = 15 */
+ −
+ − /*
+ − * Value constants for VAL_max_retrans
+ − */
+ − #define MAX_RETRANS_1 (0x0) /* Maximum 1 retransmission */
+ − #define MAX_RETRANS_2 (0x1) /* Maximum 2 retransmissions */
+ − #define MAX_RETRANS_4 (0x2) /* Maximum 4 retransmissions */
+ − #define MAX_RETRANS_7 (0x3) /* Maximum 7 retransmissions */
+ −
+ − /*
+ − * Value constants for VAL_meas_valid
+ − */
+ − #define MEAS_VALID_YES (0x0) /* The measurement results are valid */
+ − #define MEAS_VALID_NO (0x1) /* the measurement results are not valid */
+ −
+ − /*
+ − * Value constants for VAL_or_ty
+ − */
+ − #define OR_TY_MT (0x0) /* Mobile terminated */
+ − #define OR_TY_MO (0x1) /* Mobile originated */
+ −
+ − /*
+ − * Value constants for VAL_mr_vers
+ − */
+ − #define VAL_MR_VERS___DEF (0x0) /* reserved */
+ − #define MR_VERS_1 (0x1) /* Adaptive Multirate speech version 1 */
+ −
+ − /*
+ − * Value constants for VAL_ncm
+ − */
+ − #define NC_0 (0x0)
+ − #define NC_1 (0x1)
+ − #define NC_2 (0x2)
+ − #define NC_TARGET (0x3) /* information on NC mode to be gathered from the target cell */
+ −
+ − /*
+ − * Value constants for VAL_nch_position
+ − */
+ − #define VAL_NCH_POSITION___DEF (0x0) /* reserved */
+ − #define NCH_1BLK_NR0 (0x0) /* 1 block / first is block 0 */
+ − #define NCH_1BLK_NR1 (0x1) /* 1 block / first is block 1 */
+ − #define NCH_1BLK_NR2 (0x2) /* 1 block / first is block 2 */
+ − #define NCH_1BLK_NR3 (0x3) /* 1 block / first is block 3 */
+ − #define NCH_1BLK_NR4 (0x4) /* 1 block / first is block 4 */
+ − #define NCH_1BLK_NR5 (0x5) /* 1 block / first is block 5 */
+ − #define NCH_1BLK_NR6 (0x6) /* 1 block / first is block 6 */
+ − #define NCH_2BLK_NR0 (0x7) /* 2 blocks / first is block 0 */
+ − #define NCH_2BLK_NR1 (0x8) /* 2 blocks / first is block 1 */
+ − #define NCH_2BLK_NR2 (0x9) /* 2 blocks / first is block 2 */
+ − #define NCH_2BLK_NR3 (0xa) /* 2 blocks / first is block 3 */
+ − #define NCH_2BLK_NR4 (0xb) /* 2 blocks / first is block 4 */
+ − #define NCH_2BLK_NR5 (0xc) /* 2 blocks / first is block 5 */
+ − #define NCH_3BLK_NR0 (0xd) /* 3 blocks / first is block 0 */
+ − #define NCH_3BLK_NR1 (0xe) /* 3 blocks / first is block 1 */
+ − #define NCH_3BLK_NR2 (0xf) /* 3 blocks / first is block 2 */
+ − #define NCH_3BLK_NR3 (0x10) /* 3 blocks / first is block 3 */
+ − #define NCH_3BLK_NR4 (0x11) /* 3 blocks / first is block 4 */
+ − #define NCH_4BLK_NR0 (0x12) /* 4 blocks / first is block 0 */
+ − #define NCH_4BLK_NR1 (0x13) /* 4 blocks / first is block 1 */
+ − #define NCH_4BLK_NR2 (0x14) /* 4 blocks / first is block 2 */
+ − #define NCH_4BLK_NR3 (0x15) /* 4 blocks / first is block 3 */
+ − #define NCH_5BLK_NR0 (0x16) /* 5 blocks / first is block 0 */
+ − #define NCH_5BLK_NR1 (0x17) /* 5 blocks / first is block 1 */
+ − #define NCH_5BLK_NR2 (0x18) /* 5 blocks / first is block 2 */
+ − #define NCH_6BLK_NR0 (0x19) /* 6 blocks / first is block 0 */
+ − #define NCH_6BLK_NR1 (0x1a) /* 6 blocks / first is block 1 */
+ − #define NCH_7BLK_NR0 (0x1b) /* 7 blocks / first is block 0 */
+ −
+ − /*
+ − * Value constants for VAL_neci
+ − */
+ − #define NECI_NO (0x0) /* New establishment causes are not supported */
+ − #define NECI_YES (0x1) /* New establishment causes are supported */
+ −
+ − /*
+ − * Value constants for VAL_nco
+ − */
+ − #define VAL_NCO___DEF (0x0) /* reserved */
+ − #define NCO_NO_REP (0x0) /* MS controlled cell reselection, no measurement reporting */
+ − #define NCO_MS_RESEL (0x1) /* MS controlled cell reselection, MA sends measurement reports */
+ − #define NCO_NET_RESEL (0x2) /* Network controlled cell reselection, MA sends measurement reports */
+ −
+ − /*
+ − * Value constants for VAL_nmo
+ − */
+ − #define VAL_NMO___0 (0x0) /* Network Mode 1 */
+ − #define VAL_NMO___1 (0x1) /* Network Mode 2 */
+ − #define VAL_NMO___2 (0x2) /* Network Mode 3 */
+ − #define VAL_NMO___3 (0x3) /* reserved */
+ −
+ − /*
+ − * Value constants for VAL_nscb
+ − */
+ − #define NSCB_ON (0x0) /* NSCB can be used (default) */
+ − #define NSCB_OFF (0x1) /* NSCB shall be turned off */
+ −
+ − /*
+ − * Value constants for VAL_nci
+ − */
+ − #define NCI_IGNORE (0x0) /* Out of range timing advance is ignored */
+ − #define NCI_TRIGGER (0x1) /* Out of range timing advance shall trigger a handover failure */
+ −
+ − /*
+ − * Value constants for VAL_num_range
+ − */
+ − #define VAL_NUM_RANGE___DEF (0x0) /* reserved */
+ −
+ − /*
+ − * Value constants for VAL_odd_even
+ − */
+ − #define EVEN (0x0) /* even */
+ − #define ODD (0x1) /* odd */
+ −
+ − /*
+ − * Value constants for VAL_pck_chan_type
+ − */
+ − #define VAL_PCK_CHAN_TYPE___DEF (0x0) /* reserved */
+ − #define PCK_CH_1 (0x1) /* for backward compatibility */
+ −
+ − /*
+ − * Value constants for VAL_pch_restruct
+ − */
+ − #define PCH_RESTRUCT_NO (0x0) /* paging channel is restructured */
+ − #define PCH_RESTRUCT_YES (0x1) /* paging channel is not restructured */
+ −
+ − /*
+ − * Value constants for VAL_pm
+ − */
+ − #define PAGING_NORM (0x0) /* Normal paging. */
+ − #define PAGING_EXT (0x1) /* Extended paging. */
+ − #define PAGING_REORG (0x2) /* Paging reorganization. */
+ − #define PAGING_SAME (0x3) /* Same as before. */
+ −
+ − /*
+ − * Value constants for VAL_pc_meas_chan
+ − */
+ − #define PC_MEAS_BCCH (0x0) /* BCCH shall be used for downlink measurements for power control */
+ − #define PC_MEAS_PDCH (0x1) /* PDCH shall be used for downlink measurements for power control */
+ −
+ − /*
+ − * Value constants for VAL_poll
+ − */
+ − #define POLL_NO_ACTION (0x0) /* no action required from MS */
+ − #define POLL_SEND_ACK (0x1) /* MS shall send a PACKET CONTROL ACKNOWLEDGEMENT */
+ −
+ − /*
+ − * Value constants for VAL_pow_ctrl
+ − */
+ − #define POW_CTRL_NO (0x0) /* PWRC is not set */
+ − #define POW_CTRL_YES (0x1) /* PWRC is set */
+ −
+ − /*
+ − * Value constants for VAL_pow_offs
+ − */
+ − #define POW_OFFS_0_DB (0x0) /* offset 0 dB */
+ − #define POW_OFFS_2_DB (0x1) /* offset 2 dB */
+ − #define POW_OFFS_4_DB (0x2) /* offset 4 dB */
+ − #define POW_OFFS_6_DB (0x3) /* offset 6 dB */
+ −
+ − /*
+ − * Value constants for VAL_prio_acc_thr
+ − */
+ − #define PAT_NO (0x0) /* Packet access not allowed in the cell */
+ − #define PAT_SPARE1 (0x1) /* Spare, shall be interpreted as 0 */
+ − #define PAT_SPARE2 (0x2) /* Spare, shall be interpreted as 0 */
+ − #define PAT_ACC1 (0x3) /* packet access allowed for priority level 1 */
+ − #define PAT_ACC2 (0x4) /* packet access allowed for priority level 1 to 2 */
+ − #define PAT_ACC3 (0x5) /* packet access allowed for priority level 1 to 3 */
+ − #define PAT_ACC4 (0x6) /* packet access allowed for priority level 1 to 4 */
+ − #define PAT_SPARE6 (0x7) /* Spare, shall be interpreted as 6 */
+ −
+ − /*
+ − * Value constants for VAL_protoc_ident
+ − */
+ − #define VAL_PROTOC_IDENT___DEF (0x0) /* reserved */
+ − #define RRLP_LCS (0x0) /* Radio Resource Location Service Protocol */
+ −
+ − /*
+ − * Value constants for VAL_rot
+ − */
+ − #define TIME_DIFF_NO (0x0) /* Mobile Time Difference IE shall not be included in the HANDOVER COMPLETE message */
+ − #define TIME_DIFF_YES (0x1) /* Mobile Time Difference IE shall be included in the HANDOVER COMPLETE message */
+ −
+ − /*
+ − * Value constants for VAL_res_ack
+ − */
+ − #define RES_ACK_NO (0x0) /* resumption of GPRS services not successfully acknowledged */
+ − #define RES_ACK_YES (0x1) /* resumption of GPRS services successfully acknowledged */
+ −
+ − /*
+ − * Value constants for VAL_rlc_mode
+ − */
+ − #define RLC_ACK_MODE (0x0) /* RLC acknowledged mode */
+ − #define RLC_UNACK_MODE (0x1) /* RLC unacknowledged mode */
+ −
+ − /*
+ − * Value constants for VAL_rr_cause
+ − */
+ − #define RRC_NORMAL_EVENT (0x0) /* Normal event */
+ − #define RRC_UNSPECIFIED (0x1) /* Abnormal release, unspecified */
+ − #define RRC_CHAN_UNACCEPT (0x2) /* Abnormal release, channel unacceptable */
+ − #define RRC_TIMER_EXPIRED (0x3) /* Abnormal release, timer expired */
+ − #define RRC_NO_ACTIVITY (0x4) /* Abnormal release, no activity on the radio path */
+ − #define RRC_PREEMEPT (0x5) /* Preemptive release */
+ − #define RRC_TIME_ADVANCE (0x8) /* Handover impossible, timing advance out of range */
+ − #define RRC_CHANNEL_MODE (0x9) /* Channel mode unacceptable */
+ − #define RRC_FREQ_NOT_IMPL (0xa) /* Frequency not implemented */
+ − #define RRC_CALL_CLEARED (0x41) /* Call already cleared */
+ − #define RRC_INCORRECT_MSG (0x5f) /* Semantically incorrect message */
+ − #define RRC_INVALID_MAN_INFO (0x60) /* Invalid mandatory information */
+ − #define RRC_MSG_NOT_IMPL (0x61) /* Message type non-existent or not implemented */
+ − #define RRC_MSG_NOT_COMPAT (0x62) /* Message type not compatible with protocol state */
+ − #define RRC_COND_IE_ERROR (0x64) /* Conditional IE error */
+ − #define RRC_NO_CELL_ALLOC (0x65) /* No cell allocation available */
+ − #define RRC_PROT_UNSPECIFIED (0x6f) /* Protocol error unspecified */
+ −
+ − /*
+ − * Value constants for VAL_sf
+ − */
+ − #define SF_VBS (0x0) /* broadcast call reference */
+ − #define SF_VGCS (0x1) /* group call reference */
+ −
+ − /*
+ − * Value constants for VAL_set_amr
+ − */
+ − #define SET_AMR_12_2 (0x80) /* codec 12.2 kbit/s is part of subset */
+ − #define SET_AMR_10_2 (0x40) /* codec 10.2 kbit/s is part of subset */
+ − #define SET_AMR_7_95 (0x20) /* codec 7.95 kbit/s is part of subset */
+ − #define SET_AMR_7_4 (0x10) /* codec 7.4 kbit/s is part of subset */
+ − #define SET_AMR_6_7 (0x8) /* codec 6.7 kbit/s is part of subset */
+ − #define SET_AMR_5_9 (0x4) /* codec 5.9 kbit/s is part of subset */
+ − #define SET_AMR_5_15 (0x2) /* codec 5.15 kbit/s is part of subset */
+ − #define SET_AMR_4_75 (0x1) /* codec 4 .75 kbit/s is part of subset */
+ −
+ − /*
+ − * Value constants for VAL_si13_pos
+ − */
+ − #define SI13_ON_BCCH_NORM (0x0) /* on BCCH Norm */
+ − #define SI13_ON_BCCH_EXT (0x1) /* on BCCH Ext. */
+ −
+ − /*
+ − * Value constants for VAL_si_cf
+ − */
+ − #define VAL_SI_CF___DEF (0x0) /* Update of unknown SI message type */
+ − #define SI_CF_UNSPEC (0x0) /* Update of unspecified SI message(s) */
+ − #define SI_CF_1 (0x1) /* Update of SI1 message */
+ − #define SI_CF_2X (0x2) /* Update of SI2, SI2bis or SI2ter message */
+ − #define SI_CF_3UNTIL8 (0x3) /* Update of SI3, SI4, SI7 or SI8 message */
+ − #define SI_CF_9 (0x4) /* Update of SI9 message */
+ −
+ − /*
+ − * Value constants for VAL_solsa_exc_acc
+ − */
+ − #define SOLSA_EXCLUSIVE_NO (0x0)
+ − #define SOLSA_EXCLUSIVE_YES (0x1)
+ −
+ − /*
+ − * Value constants for VAL_spgc
+ − */
+ − #define SPGC_NO (0x0) /* SPLIT_PG_CYCLE is not supported on CCCH in this cell */
+ − #define SPGC_YES (0x1) /* SPLIT_PG_CYCLE is supported on CCCH in this cell */
+ −
+ − /*
+ − * Value constants for VAL_sc
+ − */
+ − #define START_CIPH_NO (0x0) /* No ciphering */
+ − #define START_CIPH_YES (0x1) /* Start ciphering */
+ −
+ − /*
+ − * Value constants for VAL_st_mode
+ − */
+ − #define CODEC_MODE_1 (0x0) /* lowest bit rate */
+ − #define CODEC_MODE_2 (0x1) /* second lowest rate if codec includes more then 1 mode */
+ − #define CODEC_MODE_3 (0x2) /* third lowest rate if codec includes more then 2 modes */
+ − #define CODEC_MODE_4 (0x3) /* highest mode if codec includes 4 modes */
+ −
+ − /*
+ − * Value constants for VAL_susp_cause
+ − */
+ − #define VAL_SUSP_CAUSE___DEF (0x0) /* shall be treated as 0 */
+ − #define SUSP_C_CALL (0x0) /* Mobile originated or mobile terminated call */
+ − #define SUSP_C_LU (0x1) /* Location Update */
+ − #define SUSP_C_SMS (0x2) /* Short message service */
+ − #define SUSP_C_SS (0x3) /* Supplementary service activation */
+ − #define SUSP_C_VBS (0x4) /* Voice broadcast or group call */
+ −
+ − /*
+ − * Value constants for VAL_si
+ − */
+ − #define SYI_NON_SYNCH (0x0) /* Non-synchronized */
+ − #define SYI_NORM_SYNCH (0x1) /* Synchronized */
+ − #define SYI_PRE_SYNCH (0x2) /* Pre-synchronised */
+ − #define SYI_PSEUDO_SYNCH (0x3) /* Pseudo-synchronised */
+ −
+ − /*
+ − * Value constants for VAL_tm
+ − */
+ − #define VAL_TM___DEF (0x0) /* reserved */
+ − #define TM_DED (0x0) /* dedicated mode */
+ − #define TM_GROUP (0x1) /* group transmit mode */
+ −
+ − /*
+ − * Value constants for VAL_ta_valid
+ − */
+ − #define TA_VALID_NO (0x0) /* the value is not valid */
+ − #define TA_VALID_YES (0x1) /* the value is valid */
+ −
+ − /*
+ − * Value constants for VAL_tlli_bcc
+ − */
+ − #define TLLI_BCC1 (0x0) /* mobile station shall use CS-1 */
+ − #define TLLI_BCC_CODED (0x1) /* mobile station shall use CS specified by Channel Coding */
+ −
+ − /*
+ − * Value constants for VAL_tma
+ − */
+ − #define TMA_0 (0x0) /* no meaning */
+ − #define TMA_1 (0x1) /* the message is the first of two in a two message assignment */
+ −
+ − /*
+ − * Value constants for VAL_tx_integer
+ − */
+ − #define SPREAD_TRANS_3 (0x0) /* 3 slots used to spread transmission */
+ − #define SPREAD_TRANS_4 (0x1) /* 4 slots used to spread transmission */
+ − #define SPREAD_TRANS_5 (0x2) /* 5 slots used to spread transmission */
+ − #define SPREAD_TRANS_6 (0x3) /* 6 slots used to spread transmission */
+ − #define SPREAD_TRANS_7 (0x4) /* 7 slots used to spread transmission */
+ − #define SPREAD_TRANS_8 (0x5) /* 8 slots used to spread transmission */
+ − #define SPREAD_TRANS_9 (0x6) /* 9 slots used to spread transmission */
+ − #define SPREAD_TRANS_10 (0x7) /* 10 slots used to spread transmission */
+ − #define SPREAD_TRANS_11 (0x8) /* 11 slots used to spread transmission */
+ − #define SPREAD_TRANS_12 (0x9) /* 12 slots used to spread transmission */
+ − #define SPREAD_TRANS_14 (0xa) /* 14slots used to spread transmission */
+ − #define SPREAD_TRANS_16 (0xb) /* 16 slots used to spread transmission */
+ − #define SPREAD_TRANS_20 (0xc) /* 20 slots used to spread transmission */
+ − #define SPREAD_TRANS_25 (0xd) /* 25 slots used to spread transmission */
+ − #define SPREAD_TRANS_32 (0xe) /* 32 slots used to spread transmission */
+ − #define SPREAD_TRANS_50 (0xf) /* 50 slots used to spread transmission */
+ −
+ − /*
+ − * Value constants for VAL_ident_type
+ − */
+ − #define VAL_IDENT_TYPE___DEF (0x0) /* reserved */
+ − #define ID_TYPE_NO_IDENT (0x0) /* No Identity */
+ − #define ID_TYPE_IMSI (0x1) /* IMSI */
+ − #define ID_TYPE_IMEI (0x2) /* IMEI */
+ − #define ID_TYPE_IMEISV (0x3) /* IMEISV */
+ − #define ID_TYPE_TMSI (0x4) /* TMSI */
+ −
+ − /*
+ − * Value constants for VAL_usf_gran
+ − */
+ − #define USF_GRAN1 (0x0) /* the mobile shall send one RLC/MAC block */
+ − #define USF_GRAN4 (0x1) /* the mobile shall send four consecutive RLC/MAC blocks */
+ −
+ − /*
+ − * Value constants for VAL_break_ind
+ − */
+ − #define BREAK_IND_NO (0x0) /* Additional parameters are not sent in SYSTEM INFORMATION TYPE 7 and 8 */
+ − #define BREAK_IND_YES (0x1) /* Additional parameters SI4 Rest Octets_S are sent in SYSTEM INFORMATION TYPE 7 and 8 */
+ −
+ − /*
+ − * user defined constants
+ − */
+ − #define L3MAX_ACK (0xfb)
+ − #define L3MAX (0xfb)
+ − #define MAX_APDU_DATA (0xf8)
+ − #define MAX_ARFCN (0x14)
+ − #define MAX_ARFCNI (0x5)
+ − #define MAX_GR_C_INFO (0x5)
+ − #define MAX_ITP (0x5)
+ − #define MAX_LSA_ID (0x2)
+ − #define MAX_POS (0x5)
+ − #define MAX_RANGE (0xa)
+ − #define MAX_RFL (0x5)
+ − #define N_MAX_RANGE (0x1e)
+ − #define N_CELL_MRES (0x6)
+ − #define N_FREQ_SHORT_LIST (0x9)
+ − #define N_FREQ_SKIP (0x10)
+ − #define N_MAX_FREQ_LIST (0xfa)
+ − #define N_MOB_ALLOC (0x8)
+ − #define NCELL_DESC_BIT_LEN (0x80)
+ −
+ − #include "CDG_LEAVE.h"
+ −
+ −
+ − #endif