/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_dcm.val                                                      |
| SOURCE  : "sap\dcm.pdf"                                                  |
| LastModified : "2003-09-03"                                              |
| IdAndVersion : "8462.101.03.001"                                         |
| SrcFileTime  : "Thu Nov 29 09:39:32 2007"                                |
| Generated by CCDGEN_2.5.5A on Thu Sep 25 09:52:55 2014                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_DCM_VAL
#define P_DCM_VAL


#define CDG_ENTER__P_DCM_VAL

#define CDG_ENTER__FILENAME _P_DCM_VAL
#define CDG_ENTER__P_DCM_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_DCM_VAL__LAST_MODIFIED _2003_09_03
#define CDG_ENTER__P_DCM_VAL__ID_AND_VERSION _8462_101_03_001

#define CDG_ENTER__P_DCM_VAL__SRC_FILE_TIME _Thu_Nov_29_09_39_32_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_DCM_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_bearer_select
 */
#define DCM_SOCK_BEARER_ANY            (0x1)      /* DCM will decide which connection type to be used */
#define DCM_SOCK_BEARER_GPRS           (0x2)      /* Use a GPRS context as bearer, DCM will decide which GPRS settings to be used */
#define DCM_SOCK_BEARER_GSM            (0x3)      /* Use GSM data connection as bearer DCM will decide which GSM settings to be used */
#define DCM_SOCK_BEARER_USE_PROFILE    (0x4)      /* Use a specific data account for this connection */
#define DCM_SOCK_BEARER_AS_SPECIFIED   (0x5)      /* Use the data account information which is which is delivered within this signal */

/*
 * Value constants for VAL_authtype
 */
#define DCM_SOCK_AUTH_PAP              (0x1)      /* PAP authentification protocol  */
#define DCM_SOCK_AUTH_CHAP             (0x2)      /* CHAP authentification protocol !!! NOT SUPPORTED */
#define DCM_SOCK_AUTH_NO               (0x3)      /* No authentication              */

/*
 * Value constants for VAL_result
 */
#define DCM_RET_OK                     (0x0)      /* The action has been performed successfully. */
#define DCM_RET_NOT_READY              (0x1)      /* The command can not be processed now. */
#define DCM_RET_ALREADY_ACTIVATED      (0x2)      /* Connection refused because already actuvated. */
#define DCM_RET_UNKNOWN_EVENT          (0x3)      /* Unknown receipt event.         */
#define DCM_RET_INVALID_PARAMETER      (0x4)      /* A parameter is wrong.          */
#define DCM_RET_CMD_PENDING            (0x5)      /* There is a pending command yet. */
#define DCM_RET_PS_CONN_BROKEN         (0x6)      /* Loose of bearer connection.    */

/*
 * user defined constants
 */
#define CDCM_APN_MAX_LEN               (0x64)     
#define CDCM_PHONE_NR_LEN              (0x54)     
#define CDCM_PDP_MAX_LEN               (0x14)     
#define CDCM_GATE_MAX_LEN              (0x14)     
#define CDCM_USER_MAX_LEN              (0x19)     
#define CDCM_PASSWORD_MAX_LEN          (0x19)     
#define CDCM_DNS_MAX_LEN               (0x14)     

#include "CDG_LEAVE.h"


#endif