/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_rrlp.val                                                     |
| SOURCE  : "sap\rrlp.pdf"                                                 |
| LastModified : "2002-11-13"                                              |
| IdAndVersion : "8443.102.02.100"                                         |
| SrcFileTime  : "Thu Nov 29 09:53:06 2007"                                |
| Generated by CCDGEN_2.5.5A on Thu Sep 25 09:52:55 2014                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_RRLP_VAL
#define P_RRLP_VAL


#define CDG_ENTER__P_RRLP_VAL

#define CDG_ENTER__FILENAME _P_RRLP_VAL
#define CDG_ENTER__P_RRLP_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_RRLP_VAL__LAST_MODIFIED _2002_11_13
#define CDG_ENTER__P_RRLP_VAL__ID_AND_VERSION _8443_102_02_100

#define CDG_ENTER__P_RRLP_VAL__SRC_FILE_TIME _Thu_Nov_29_09_53_06_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_RRLP_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_cause
 */
#define RRLP_METHOD_INVALID            (0x7)      /* Position method is not supported */
#define RRLP_REF_BTS_INVALID           (0xa)      /* The ref. BTS for E-OTD is not the serving BTS */
#define RRLP_HANDOVER                  (0x14)     /* The measurement procedure was interrupted by a handover. No RRLP specific error message is created. */

/*
 * Value constants for VAL_exp_otd
 */

/*
 * Value constants for VAL_loc_method
 */
#define EOTD_METHOD                    (0x0)      
#define GPS_METOD                      (0x1)      
#define GPS_OR_EOTD_METOD              (0x2)      

/*
 * Value constants for VAL_mfrm_offset
 */

/*
 * Value constants for VAL_otd_type
 */
#define ROUGH_RTD                      (0x0)      /* only rough RTD has been provided by the NW */
#define EXPECTED_OTD                   (0x1)      /* only expectedOTD has been provided by the NW */
#define BOTH_OTD                       (0x2)      /* Both OTD / RTD types have been provided by the NW */

/*
 * Value constants for VAL_pos_method
 */
#define MS_ASSISTED                    (0x0)      
#define MS_BASED                       (0x1)      
#define MS_BASED_PREF                  (0x2)      
#define MS_ASSISTED_PREF               (0x3)      

/*
 * Value constants for VAL_rough_rtd
 */

/*
 * Value constants for VAL_ta_correction_present
 */
#define TA_PRESENT                     (0x1)      /* TA present                     */
#define TA_NOT_PRESENT                 (0x0)      /* TA NOT present                 */

/*
 * Value constants for VAL_uncertainty
 */
#define UNC_MAX_2BIT                   (0x0)      /* uncertainty in bits. 0 - 2 bits */
#define UNC_MAX_4BIT                   (0x1)      /* uncertainty in bits. 3 - 4 bits */
#define UNC_MAX_8BIT                   (0x2)      /* uncertainty in bits. 5 - 8 bits */
#define UNC_MAX_12BIT                  (0x3)      /* uncertainty in bits. 9 - 12 bits */
#define UNC_MAX_16BIT                  (0x4)      /* uncertainty in bits. 13 - 16 bits */
#define UNC_MAX_22BIT                  (0x5)      /* uncertainty in bits. 17 - 22 bits */
#define UNC_MAX_30BIT                  (0x6)      /* uncertainty in bits. 23 - 30 bits */
#define UNC_GT_30BIT                   (0x7)      /* uncertainty in bits.  > 30 bits */

/*
 * user defined constants
 */
#define R_NUM_MEAS_SETS                (0x3)      
#define R_MAX_REF_NEIGH_BTS            (0xf)      
#define MAX_NCELL_EOTD                 (0xf)      

#include "CDG_LEAVE.h"


#endif