FreeCalypso > hg > fc-magnetite

view cdg211/prim/dio.pdf @ 556:39a226a06196

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
documentation update for rebuilding the easy parts of GPF from source
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 19 Nov 2018 02:00:21 +0000
parents 56abf6cf8a0b
children
line wrap: on
line source

;********************************************************************************
;*** File           : DIO.pdf
;*** Creation       : Fri Jun 08 13:57:08 CST 2007
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : DIO
;*** Document No.   : ...
;*** Document Date  : 2004-03-19
;*** Document Status: BEING_PROCESSED
;*** Document Author: RM
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Tue Jul 19 13:38:38 2005"
PRAGMA 	LAST_MODIFIED 	"2004-03-19"
PRAGMA 	ID_AND_VERSION 	"..."






VALTAB 	VAL_baud_rate
VAL 	0x00000000 	DIO4_BAUD_RESERVED 	"reserved value"
VAL 	0x00000001 	DIO4_BAUD_AUTO 	"Automatic detected"
VAL 	0x00000002 	DIO4_BAUD_75 	"Transmission rate of 75 bits/sec"
VAL 	0x00000004 	DIO4_BAUD_110 	"Transmission rate of 110 bits/sec"
VAL 	0x00000008 	DIO4_BAUD_150 	"Transmission rate of 150 bits/sec"
VAL 	0x00000010 	DIO4_BAUD_300 	"Transmission rate of 300 bits/sec"
VAL 	0x00000020 	DIO4_BAUD_600 	"Transmission rate of 600 bits/sec"
VAL 	0x00000040 	DIO4_BAUD_1200 	"Transmission rate of 1200 bits/sec"
VAL 	0x00000080 	DIO4_BAUD_2400 	"Transmission rate of 2400 bits/sec"
VAL 	0x00000100 	DIO4_BAUD_4800 	"Transmission rate of 4800 bits/sec"
VAL 	0x00000200 	DIO4_BAUD_7200 	"Transmission rate of 7200 bits/sec"
VAL 	0x00000400 	DIO4_BAUD_9600 	"Transmission rate of 9600 bits/sec"
VAL 	0x00000800 	DIO4_BAUD_14400 	"Transmission rate of 14400 bits/sec"
VAL 	0x00001000 	DIO4_BAUD_19200 	"Transmission rate of 19200 bits/se"
VAL 	0x00002000 	DIO4_BAUD_28800 	"Transmission rate of 28800 bits/se"
VAL 	0x00004000 	DIO4_BAUD_33900 	"Transmission rate of 33900 bits/se"
VAL 	0x00008000 	DIO4_BAUD_38400 	"Transmission rate of 38400 bits/se"
VAL 	0x00010000 	DIO4_BAUD_57600 	"Transmission rate of 57600 bits/se"
VAL 	0x00020000 	DIO4_BAUD_115200 	"Transmission rate of 115200 bits/se"
VAL 	0x00040000 	DIO4_BAUD_203125 	"Transmission rate of 203125 bits/se"
VAL 	0x00080000 	DIO4_BAUD_230400 	"Transmission rate of 230400 bits/se"
VAL 	0x00100000 	DIO4_BAUD_406250 	"Transmission rate of 406250 bits/se"
VAL 	0x00200000 	DIO4_BAUD_460800 	"Transmission rate of460800 bits/se"
VAL 	0x00400000 	DIO4_BAUD_812500 	"Transmission rate of 812500 bits/se"
VAL 	0x00800000 	DIO4_BAUD_921600 	"Transmission rate of 921600 bits/se"

VALTAB 	VAL_dev_type
VAL 	0x00200000 	DIO_DATA_MUX 	"device can start a multiplexer"
VAL 	0x00400000 	DIO_DATA_PKT 	"device can contain packet data"
VAL 	0x00800000 	DIO_DATA_SER 	"device can contain serial data"
VAL 	0x00A0000 	DIO_DATA_SER_MUX 	"serial device which can start a multiplexer"
VAL 	0x0000ff00 	DIO_TYPE_ID_MASK 	"mask for dio identifier to separate different capability structs with the same combination"
VAL 	0x00ff0000 	DIO_TYPE_DAT_MASK 	"mask for dio identifier to separate kind of data support"
VAL 	0x00800100 	DIO_TYPE_SER 	"Type for serial devices like UART"
VAL 	0x00A00100 	DIO_TYPE_SER_MUX 	"Type for serial devices like UART. It is possible to start a 27.010 multiplexer on devices of this type"
VAL 	0x00400100 	DIO_TYPE_PKT 	"Type for packet devices"

VALTAB 	VAL_char_frame
VAL 	0x00000001 	DIO_CF_8N2 	"8 data bits; no parity bit; 2 stop bits"
VAL 	0x00000002 	DIO_CF_8O1 	"8 data bits; odd parity bit; 1 stop bits"
VAL 	0x00000004 	DIO_CF_8E1 	"8 data bits; even parity bit; 1 stop bits"
VAL 	0x00000008 	DIO_CF_8M1 	"8 data bits; mark parity bit; 1 stop bits"
VAL 	0x00000010 	DIO_CF_8S1 	"8 data bits; space parity bit; 1 stop bits"
VAL 	0x00000020 	DIO_CF_8N1 	"8 data bits; no parity bit; 1 stop bits"
VAL 	0x00000040 	DIO_CF_7N2 	"7 data bits; no parity bit; 2 stop bits"
VAL 	0x00000080 	DIO_CF_7O1 	"7 data bits; odd parity bit; 1 stop bits"
VAL 	0x00000100 	DIO_CF_7E1 	"7 data bits; even parity bit; 1 stop bits"
VAL 	0x00000200 	DIO_CF_7M1 	"7 data bits; mark parity bit; 1 stop bits"
VAL 	0x00000400 	DIO_CF_7S1 	"7 data bits; space  parity bit;1 stop bits"
VAL 	0x00000800 	DIO_CF_7N1 	"7 data bits; no parity bit; 1 stop bits"

VALTAB 	VAL_flow_control
VAL 	0x00000001 	DIO_FLOW_NONE 	"Data transmit: None   Data receive: None"
VAL 	0x00000002 	DIO_FLOW_NO_XOFF 	"Data transmit: None    Data receive: XON/XOFF"
VAL 	0x00000004 	DIO_FLOW_NO_CTS 	"Data transmit: None   Data receive: CTS"
VAL 	0x00000008 	DIO_FLOW_XON_NO 	"Data transmit:  local XON/XOFF Data receive: None"
VAL 	0x00000010 	DIO_FLOW_XON_XOFF 	"Data transmit:  local XON/XOFF Data receive: XON/XOFF"
VAL 	0x00000020 	DIO_FLOW_XON_CTS 	"Data transmit:  local XON/XOFF Data receive:CTS"
VAL 	0x00000040 	DIO_FLOW_RTS_NO 	"Data transmit: RTS  Data receive: None"
VAL 	0x00000080 	DIO_FLOW_RTS_XOFF 	"Data transmit: RTS  Data receive: XON/XOFF"
VAL 	0x00000100 	DIO_FLOW_RTS_CTS 	"Data transmit: RTS  Data receive: CTS"
VAL 	0x00000200 	DIO_FLOW_XTR_NO 	"Data transmit: transparent XON/XOFF  Data receive: None"
VAL 	0x00000400 	DIO_FLOW_XTR_XOFF 	"Data transmit: transparent XON/XOFF Data receive: CTS"
VAL 	0x00000800 	DIO_FLOW_XTR_CTS 	"Data transmit: transparent XON/XOFF Data receive: CTS"

VALTAB 	VAL_line_states
VAL 	0x01 	LINE_STD_DCD_ON 	"b00000001 set line DCD on"
VAL 	0x02 	LINE_STD_DCD_OFF 	"b00000010 set line DCD off"
VAL 	0x04 	LINE_STD_RING_ON 	"b00000100 set line RING on"
VAL 	0x08 	LINE_STD_RING_OFF 	"b00001000 set line RING off"
VAL 	0x10 	LINE_STD_ESCD_IND 	"b00010000 escape sequence indication"
VAL 	0x20 	LINE_STD_DTR_LDR 	"b00100000 DTR line drop indication"

VALTAB 	VAL_ser_flags
VAL 	0x80000000 	DIO_FLAG_SER_ESC 	"device supports escape sequence detection"

VALTAB 	VAL_device
VAL 	0xff000000 	DIO_DRV_MASK 	"mask for driver number to identify the driver"
VAL 	0x00ffff00 	DIO_TYPE_MASK 	"mask for device type"
VAL 	0x000000ff 	DIO_DEVICE_MASK 	"mask for actual device number chosen by the driver"
VAL 	0x00000000 	DIO_DRV_UART 	"UART driver"
VAL 	0x01000000 	DIO_DRV_USB 	"USB driver"
VAL 	0x02000000 	DIO_DRV_MUX 	"27.010 multiplexer driver"
VAL 	0x03000000 	DIO_DRV_PKT 	"packet driver"
VAL 	0x04000000 	 DIO_DRV_MCBSP 	"McBSP driver"
VAL 	0x05000000 	 DIO_DRV_APP 	"Application adapter"
VAL 	0x06000000 	 DIO_DRV_BAT 	"Binary Interface Adapter"

VALTAB 	VAL_dev_flag
VAL 	0x80000000 	DIO_FLAG_SLEEP 	"device provides the feature power saving state"

VALTAB 	VAL_mux_mode
VAL 	0x00000001 	DIO_MUX_BASIC 	"mux supports Basic option"
VAL 	0x00000002 	DIO_MUX_UIH 	"mux supports Advanced option with UIH frames"
VAL 	0x00000004 	DIO_MUX_UI 	"mux supports Advanced option with UI frames"
VAL 	0x00000008 	DIO_MUX_I 	"mux supports Advanced option with I frames (error recovery)"

VALTAB 	VAL_contr_type
VAL 	0x0001 	DIO4_CTRL_LINES 	"control struct contains serial line states"
VAL 	0x0002 	DIO4_CTRL_MUX 	"control struct contains mux control parameter"

VALTAB 	VAL_dev_mode
VAL 	0x00000001 	DIO_MODE_SER 	"device acts as serial  device"
VAL 	0x00000002 	DIO_MODE_MUX 	"device acts as 27.010 mux device"

VALTAB 	VAL_esc_char
VAL 	0x2b 	ESC_CHAR_DEFAULT 	"default escape character ('+')"

VALTAB 	VAL_guard_per
VAL 	0x00 	DIO_ESC_OFF 	"turn escape sequence detection off"
VAL 	0x3E8 	DIO_GUARD_PER_DEFAULT 	"default value 1000ms"

VALTAB 	VAL_k
VAL 	0x02 	K_DEFAULT 	"k default value"

VALTAB 	VAL_n1
VAL 	0x1f 	MUX_N1_BASIC_DEFAULT 	"default value for the basic option"
VAL 	0x40 	MUX_N1_ADVANCED_DEFAULT 	"default value for the advanced option"

VALTAB 	VAL_n2
VAL 	0x03 	MUX_N2_DEFAULT 	"default number of retransmission"

VALTAB 	VAL_sleep_mode
VAL 	0x01 	DIO_SLEEP_ENABLE 	"enter sleep mode if possible"
VAL 	0x02 	DIO_SLEEP_DISABLE 	"do not enter sleep mode"

VALTAB 	VAL_cb_line_state
VAL 	0x80000000 	DIO_SA 	"read/write: device ready"
VAL 	0x40000000 	DIO_SB 	"read/write: data valid"
VAL 	0x20000000 	DIO_X 	"read/write: flow control"
VAL 	0x10000000 	DIO_RING 	"write: RING indicator"
VAL 	0x08000000 	DIO_ESC 	"read: escape seqence detected"
VAL 	0x04000000 	DIO_MUX_STOPPED 	"multiplexer stopped"
VAL 	0x02000000 	DIO_BRK 	"read/write: break received/to be send"
VAL 	0x000000ff 	DIO_BRKLEN_MASK 	"read/write: length of break signal in character; only valid if DIO_BREAK bit is set to 1"

VALTAB 	VAL_t1
VAL 	0x0a 	MUX_T1_DEFAULT 	"default acknowledgement  timer (100ms)"

VALTAB 	VAL_t2
VAL 	0x1e 	MUX_T2_DEFAULT 	"default response timer"

VALTAB 	VAL_t3
VAL 	0x0a 	MUX_T3_DEFAULT 	"default wake up response timer (100ms)"

VALTAB 	VAL_xoff
VAL 	0x13 	XOFF_DEFAULT 	"xoff default value"

VALTAB 	VAL_xon
VAL 	0x11 	XON_DEFAULT 	"xon default value"

VALTAB 	VAL_start_mux
VAL 	0x00 	DIO_MUX_DYNAMIC 	"Do not start the 27.010 multiplexer immediately. The multi-plexer may be started dynamically on runtime"
VAL 	0x01 	DIO_MUX_START 	"Starts the 27.010 multiplexer permanently. The multiplexer can not be turned off during runtime"




VAR 	baudrate 	"user set baudrate" 	L

VAL 	@p_DIO - VAL_baud_rate@ 	

VAR 	baudrate_auto 	"automatically detected driver baudrates" 	L

VAL 	@p_DIO - VAL_baud_rate@ 	

VAR 	baudrate_fixed 	"driver baudrates which cannot be detected automatically" 	L

VAL 	@p_DIO - VAL_baud_rate@ 	

VAR 	char_frame 	"supported character framing" 	L

VAL 	@p_DIO - VAL_char_frame@ 	

VAR 	control_type 	"data types" 	S

VAL 	@p_DIO - VAL_contr_type@ 	

VAR 	device_flags 	"driver features like power saving state" 	L

VAL 	@p_DIO - VAL_dev_flag@ 	

VAR 	device_mode 	"work mode of device" 	L

VAL 	@p_DIO - VAL_dev_mode@ 	

VAR 	device_type 	"device identifier with general capability information" 	L

VAL 	@p_DIO - VAL_dev_type@ 	

VAR 	driver_name 	"pointer to driver name" 	L


VAR 	esc_char 	"ASCII character which is used in an escape sequence" 	B

VAL 	@p_DIO - VAL_esc_char@ 	

VAR 	flow_control 	"supported modes of flow control" 	L

VAL 	@p_DIO - VAL_flow_control@ 	

VAR 	guard_period 	"duration value for escape sequence" 	S

VAL 	@p_DIO - VAL_guard_per@ 	

VAR 	k 	"windows size " 	B

VAL 	@p_DIO - VAL_k@ 	

VAR 	length 	"len of dio_ctrl" 	S


VAR 	line_state 	"line state information" 	S

VAL 	@p_DIO - VAL_line_states@ 	

VAR 	mtu_control 	"max length of copied control information bytes by the driver" 	S


VAR 	mtu_data 	"max size of packet data which the driver can transfer" 	S


VAR 	mux_mode 	"supported multiplexer modes" 	L

VAL 	@p_DIO - VAL_mux_mode@ 	

VAR 	n1 	"max frame size of mux frame" 	S

VAL 	@p_DIO - VAL_n1@ 	

VAR 	n2 	"max number of retransmissions" 	B

VAL 	@p_DIO - VAL_n2@ 	

VAR 	ser_flags 	"additional supported features of serial/mux devices" 	L

VAL 	@p_DIO - VAL_ser_flags@ 	

VAR 	sleep_mode 	"enter sleep mode is possible or not" 	B

VAL 	@p_DIO - VAL_sleep_mode@ 	

VAR 	state 	"line states" 	L

VAL 	@p_DIO - VAL_cb_line_state@ 	

VAR 	t1 	"acknowledgement timer" 	B

VAL 	@p_DIO - VAL_t1@ 	

VAR 	t2 	"response timer" 	B

VAL 	@p_DIO - VAL_t2@ 	

VAR 	t3 	"wake up response timer" 	B

VAL 	@p_DIO - VAL_t3@ 	

VAR 	xoff 	"set/reset XOFF for flow control" 	B


VAR 	xon 	"set/reset XON for flow control" 	B


VAR 	return_val 	"return values are defined in gdi.h" 	S


VAR 	c_data 	"the size of the data" 	S


VAR 	data 	" pointer to the first byte of the data buffer segment" 	B


VAR 	c_dio_segment 	"the number of segments" 	B


VAR 	device 	"Data device number" 	L


VAR 	user_name 	"Basic Element" 	L


VAR 	drv_handle 	"Basic Element" 	S





COMP 	DIO_DCB_SER 	 "Structured Element"
{
 	device_type 	 ; device identifier
 	sleep_mode 	 ; power saving mechanism mode
 	baudrate 	 ; transmission data rate
 	char_frame 	 ; character framing mode
 	flow_control 	 ; flow control mode
 	xon 	 ; inband flow control mode
 	xoff 	 ; inband flow control mode
 	esc_char 	 ; ASCII character of escape sequence
 	guard_period 	 ; minimal duration before first and after last esc_char
}



COMP 	DIO_DCB_SER_MUX 	 "Structured Element"
{
 	device_type 	 ; device identifier
 	sleep_mode 	 ; power saving mechanism mode
 	baudrate 	 ; transmission data rate
 	char_frame 	 ; character framing mode
 	flow_control 	 ; flow control mode
 	xon 	 ; inband flow control mode
 	xoff 	 ; inband flow control mode
 	esc_char 	 ; ASCII character of escape sequence
 	guard_period 	 ; minimal duration before first and after last esc_char
 	device_mode 	 ; device work mode: serial or mux
 	mux_mode 	 ; multiplexer mode of 27.010
 	n1 	 ; max frame size of mux frame
 	n2 	 ; max number of retransmissions
 	t1 	 ; acknowledgement timer
 	t2 	 ; response timer of mux control channel
 	t3 	 ; wake up response timer
 	k 	 ; windows size for advanced option with error recovery
}



COMP 	DIO_DCB_PKT 	 "Structured Element"
{
 	device_type 	 ; device identifier
 	sleep_mode 	 ; power saving mechanism mode
}



COMP 	DIO_CAP_SER 	 "serial device capabiliity structures"
{
 	device_type 	 ; device identifier
 	device_flags 	 ; general additional capabilities
 	mtu_control 	 ; max number of bytes driver copies
 	mtu_data 	 ; max size of packet driver transfers
 	driver_name 	 ; pointer to zero terminated string with driver name
 	baudrate_auto 	 ; transmission rate automatically detected
 	baudrate_fixed 	 ; transmission rate can be only set
 	char_frame 	 ; supported character frame modes
 	flow_control 	 ; supported flow control modes
 	ser_flags 	 ; supported serial device capabilites
}



COMP 	DIO_CAP_SER_MUX 	 "Structured Element"
{
 	device_type 	 ; device identifier
 	device_flags 	 ; general additional capabilities
 	mtu_control 	 ; max number of bytes driver copies
 	mtu_data 	 ; max size of packet driver transfers
 	driver_name 	 ; pointer to zero terminated string with driver name
 	baudrate_auto 	 ; transmission rate automatically detected
 	baudrate_fixed 	 ; transmission rate can be only set
 	char_frame 	 ; supported character frame modes
 	flow_control 	 ; supported flow control modes
 	ser_flags 	 ; supported serial device capabilites
 	mux_mode 	 ; supported mux mode of 27.010
}



COMP 	DIO_CAP_PKT 	 "Structured Element"
{
 	device_type 	 ; device identifier
 	device_flags 	 ; general additional capabilities
 	mtu_control 	 ; max number of bytes driver copies
 	mtu_data 	 ; max size of packet driver transfers
 	driver_name 	 ; pointer to zero terminated string with driver name
}



COMP 	DIO_CAP 	 "device capabiliity structures"
{
 	device_type 	 ; device identifier
 	device_flags 	 ; general additional capabilities
 	mtu_control 	 ; max number of bytes driver copies
 	mtu_data 	 ; max size of packet driver transfers
 	driver_name 	 ; pointer to zero terminated string with driver name
}



COMP 	DIO_DCB 	 "all elements of driver configuration parameter "
{
 	device_type 	 ; device identifier
 	sleep_mode 	 ; power saving mechanism mode
}



COMP 	dio_segment 	 "Structured Element"
{
 	data 	PTR [0..65335] 	 ;  pointer to the first byte of the data buffer segment
}



COMP 	dio_buffer 	 "data buffer"
{
 	length 	 ; number of data bytes (writable or provided)
 	dio_segment 	PTR [0..255] 	 ; pointer to array of segments
}



COMP 	DIO_CTRL 	 "Structured Element"
{
 	control_type 	 ; identifier of control info structure
 	length 	 ; length of whole control info structure
}



COMP 	DIO_CTRL_LINES 	 "Structured Element"
{
 	control_type 	 ; control type of serial line states
 	length 	 ; length of control info structure
 	state 	 ; set/hold serial line states
}



COMP 	DIO_CTRL_MUX 	 "Structured Element"
{
 	control_type 	 ; control type of mux line states
 	length 	 ; length of control info structure
 	state 	 ; set/hold mux line states
}