tpudrv12.h: FCDEV3B goes back to being itself A while back we had the idea of a FreeCalypso modem family whereby our current fcdev3b target would some day morph into fcmodem, with multiple FC modem family products, potentially either triband or quadband, being firmware-compatible with each other and with our original FCDEV3B. But in light of the discovery of Tango modules that earlier idea is now being withdrawn: instead the already existing Tango hw is being adopted into our FreeCalypso family. Tango cannot be firmware-compatible with triband OM/FCDEV3B targets because the original quadband RFFE on Tango modules is wired in TI's original Leonardo arrangement. Because this Leonardo/Tango way is now becoming the official FreeCalypso way of driving quadband RFFEs thanks to the adoption of Tango into our FC family, our earlier idea of extending FIC's triband RFFE control signals with TSPACT5 no longer makes much sense - we will probably never produce any new hardware with that once-proposed arrangement. Therefore, that triband-or-quadband FCFAM provision is being removed from the code base, and FCDEV3B goes back to being treated the same way as CONFIG_TARGET_GTAMODEM for RFFE control purposes.

# This patch applies to the Init_Target() function in the init.obj module in
# main.lib; it is an example of how this code will need to be patched for
# running on our own future FreeCalypso hardware if we choose to use the same
# Spansion S71PL129NC0 flash+pSRAM MCP as used in the Pirelli DP-L10 and use
# the same memory timings as set by Pirelli's firmware.

[init.obj]

# value goes into nCS0, nCS1 and nCS3 config registers
.text 66 A4
# value goes into nCS2 config reg
.text 6C A4

# nop out the write into 0x02700000

.text 128 C0
.text 129 46